• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.48 no.4
• /
• pp.316-321
• /
• 2003

Analysis of breeding gains in grain yield has been intensively conducted in wheat, barley, oat, maize, and soybean. Such information is limited in rice. The objective of this study was to compare the breeding gains and cultural gains contributed to yield gains of Korean rice varieties since early 1900s. Two sets of yield data were used for analysis; the historical yield data of 1908 for old japonica cultivars, and present yield data in the years from 1996 to 1998 for the six cultivars, consisting of previous two old cultivars and four contemporary cultivars. The old cultivars were two native cultivars, Jodongi and Damageum, while contemporary cultivars were two premium quality japonica cultivars, Hwaseongbyeo and Dongjinbyeo, and two Tongil-type cultivars, high yielding cultivars developed from indica/japonica hybridization, Milyang23 and Dasanbyeo. The yield differences of old cultivars between the experiments in 1908 and the experiments from 1996 to 1998 were estimated as cultural gains (1.84 tons $\textrm{ha}^{-1}$) due to the improvement of cultivation technology. Yield differences between the old cultivars and contemporary cultivars were considered total yield gains during the periods. These were 2.51 tons $\textrm{ha}^{-1}$ for japonica cultivars and 3.81 tons $\textrm{ha}^{-1}$ for Tongil-type cultivars. From these data, the genetic gain of 0.67 tons $\textrm{ha}^{-1}$ and 1.97 tons $\textrm{ha}^{-1}$ were estimated for japonica cultivars and Tongil-type cultivars respectively. The ratio between cultural gain and genetic gain appeared to be 2.7:1 for japonica cultivars and 1:1 for Tongil-type cultivars. This analysis clearly showed the higher genetic contribution in Tongil-type cultivars than in japonica cultivars, suggesting a guideline to be used when planning new yield improvement programs. Additional implication has emerged when a better yield response to modem cultivation technology was found in one of the old cultivars, suggesting the combined improvement between breeding and cultural improvement is necessary for attaining the maximum yield capacity of a crop.

• International Journal of Advanced Culture Technology
• /
• v.11 no.2
• /
• pp.358-365
• /
• 2023

As the Internet is used as a major channel for marketing and sales, the top ranking of search engine results is becoming a key competitor among websites. Various methods exist to maintain the top ranking of websites in search engines, typically investing heavily in organic coding or search engine optimization. The purpose of this paper, we present the ranking by recognizing factors that should be removed as negative factors when designing a web page in consideration of website visibility (SEO) because if website visibility is not met, the ranking may fall behind or be completely removed from the search engine index. The experiments that recognized and ranked the negative factors of website visibility proposed in this paper were provided through theory and experiments based on the existing website visibility analysis model. The models analyzed in this paper, we expressed or quantified as scores based on the methodology of each model, and 10 items were selected as negative factors through experiments and ranked as high scores. Therefore, when designing a website, it should be considered that the website is not removed from the search engine index as it is designed by excluding high-ranking items, which are negative factors.

• Journal of the Korean Society of Safety
• /
• v.28 no.1
• /
• pp.117-124
• /
• 2013

Emergency operating procedures(EOPs) of nuclear power plants should be described considering the cognitive capability and limitation of operators and provide appropriate information in the aspect of human factors. Procedures which doesn't consider cognitive characteristics of operators can become causes of human errors. In previous researches, in order to reduce these problems related to the description of EOP, an improvement suggestion for EOP writer's guide has been proposed, which is reflected human factors aspects that should be considered when describing EOPs. The proposed items, however, have a necessity to be validated because it was listed from various documents such as standards and guidelines without any special validation process. For that reason, in this study, a validation process were performed to show that procedures, which are described in compliance with the requirement items proposed in the improved EOP writer's guide, have positive effects in the aspects of human errors and performance comparing with previous procedures. Experiments were performed to compare the performances of two tasks which are described in compliance with each writer's guide of before and after the improvement During each task was performed in experiments, changes of physiological responses such as EEG and ECG were measured to evaluate the cognitive workload and the stress of operators in each task. And also, as the performance, frequencies of errors and cognition speeds of each task were evaluated. In the results of the experiment, the portions of the ${\beta}$ wave decreased in the tasks overall after the improvement. In the case of ECG, change rates of the mean of R-R interval were decreased in the tasks after improvement. In the results of the performance, the cognition and the response time of the tasks after the improvement were predominant with statistical significancies. Error times in the tasks after improvement were decreased or same to the tasks before improvement. Conclusively, it was validated that the procedures were described in compliance with the improved EOP writer's guide had effects on the reduction of human errors and improvement of performance.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.9
• /
• pp.700-706
• /
• 2001

In this paper, I have fabricated and measured the gallium nitride(GaN) based Schottky diodes, and have carried out analyses of degradation of Schottky barrier characteristics. To improve of degraded Schottky barrier characteristics, I have carried out several experiments such as N$_2$ plasma exposure, annealing in N$_2$ ambient and annealing after N$_2$ plasma exposure. In the results of these experiments, I have achieved that only annealing in N$_2$ ambient is enough to improve the Schottky barrier characteristics, are temperature of 700$\^{C}$ and time of 90 sec in N$_2$ ambient furnace. for the analysis of these experiments, I have carried out the measurement of electric characteristics and quantitative analysis of etching damage using AES(Aguger Electron Spectroscopy).

• Atmosphere
• /
• v.17 no.4
• /
• pp.435-453
• /
• 2007

KEOP (Korea Enhanced Observing Period)-2004 intensive summer observation was carried out from 20 June to 5 July 2004 over the Southwestern part of the Korean peninsula. In this study, the effects of KEOP-2004 intensive observation data on the simulation of precipitation system are investigated using KLAPS (Korea Local Analysis and Prediction System) and PSU/NCAR MM5. Three precipitation cases during the intensive observation are selected for detailed analysis. In addition to the control experiments using the traditional data for its initial and boundary conditions, two sensitivity experiments using KEOP data with and without Jindo radar are performed. Although it is hard to find a clear and consistent improvement in the verification score (threat score), it is found that the KEOP data play a role in improving the position and intensity of the simulated precipitation system. The experiments started at 00 and 12 UTC show more positive effect than those of 06 and 18 UTC. The effect of Jindo radar is dependent on the case. It plays a significant role in the heavy rain cases related to a mesoscale low over Changma front and the landing of a Typhoon. KEOP data produce more strong difference in the 06/18 UTC experiments than in 00/12 UTC, but give more positive effects in 00/12 UTC experiments. One of the possible explanations for this is that : KEOP data could properly correct the atmosphere around them when there are certain amounts of data, while gives excessive effect to the atmospheric field when there are few data. CRA analysis supports this reasoning. According to the CRA (Contiguous Rain Area) analysis, KEOP data in 00/12 UTC experiments improve only the surrounding area, resulting in essentially same precipitation system so the effects remain only in each convective cell rather than the system itself. On the other hand, KEOP data modify the precipitation system itself in 06/18 UTC experiments. Therefore the effects become amplified with time integration.

• Nuclear Engineering and Technology
• /
• v.30 no.3
• /
• pp.181-193
• /
• 1998

The COBRA-TF liquid droplet entrainment models have been assessed and improved through various experiments. The COBRA-TF code uses the Wurtz entrainment model in the film mist flow regime and the mechanistic model based on the critical Weber number and critical vapor velocity in the hot wall flow regimes, respectively. The Wurtz model has been replaced with the modified Sugawara model. The assessment against the experiments by Hewitt, Keeys, Yanai, and Whalley showed the modified Sugawara model better predicts the steam-water as well as the air-water experiments for the film mist flow regime. For hot wall flow regime, the COBRA-TF entrainment model was modified using two methods, one with an increased critical Weber number and the other with the Yonomoto's critical vapor velocity model. The modified models were assessed using the FLECHT-SEASET bottom reflood tests. The results showed that the Yonomoto model best predicts the quenching time, whereas the local maximum rod temperature was not affected much.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.267-270
• /
• 1998

Unequal wheel-radius causes odometry errors which may be increased unbounded. This paper deals with the practical method for modification of wheel-radius through experiments. This can increase the robot's odometric accuracy. Experimental results are presented that show improvement of odometric accuracy.

• Journal of the Korean Professional Engineers Association
• /
• v.33 no.1
• /
• pp.83-88
• /
• 2000

Taguchi developed and provided various independent methods for actual application in design of experiments. Taguchi method is described in philosophy, method and others related to quality management. This thesis is one of case studies for improving the bond strength of epoxy resin by Taguchi method which is applied as a optimum developing tool in six sigma management revolution in many companies.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.12 no.20
• /
• pp.33-38
• /
• 1989

In order to achieve the most suitable designing of shoemaking, the structure of shoemaking is described in this study by inquiring into structural and functional effects given by shoes to human feet. Also, the role of insole that is an essential portion in view of function in shoemaking is described and. for the improvement of quality the fact that selection of material of insole has an effect to quality is substantiated through experiments of adhesive tensile and absorption percentage. Though identification of the qualify of insole with the naked eyes is impossible because it is inserted between the internal layers of a shoe. It is not only an essential portion for the improvement of the quality of shoemaking but it gives an essential effect to the sanitation and health of human body(feet) when insole of lower qualify is used. In view of these the improvement and enhancement of the quality of home-made material of insole are earnestly required.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.10
• /
• pp.1741-1747
• /
• 2010

The development of overload management systems for distribution transformers offers new opportunities for improving the reliability of distribution systems. It allows network planners to optimize the system resource utilization and investment cost. Such an improvement in the flexibility of the distribution network is only possible if the operator has more accurate knowledge of the realtime conditions of distribution transformers. In this paper, we present an improved overload decision system for distribution transformers using realtime monitoring data. Our study can be categorized into two parts: (a) improvement in the criteria for judging the overload conditions of distribution transformers and (b) development of an overload evaluation system using realtime monitoring data. In order to determine the overload criteria, overload experiments are performed on sample transformers; the results of these experiments are used to define the relationship between the transformer overload and the increase in the top-oil temperature. To verify the accuracy of the experimental results, field tests are performed using specially manufactured transformers, the loads and top-oil temperatures of which can be measured. For arriving at online overload decisions, we propose methods whereby the measured load curve can be converted into an overload characteristic curve and the overload time can be calculated for any load condition. The developed system is able to evaluate the overload for individual distribution transformers and calculate the losses using realtime monitoring data.