• 센서학회지
• /
• 제20권4호
• /
• pp.260-265
• /
• 2011

The silicon vertical hall devices are fabricated using a modified bipolar process. It consists of the thin p-layer at Si-$SiO_2$, interface and n-epi layer without $n^+$buried layer to improve the sensitivity and influence of interface effects. Experimental samples are a sensor type I with and type H without p+isolation dam adjacent to the center current electrode. The experimental results for both type show a more high current-related sensitivity than the former's vertical hall devices. The sensitivity of type H and type I are about 150 V/AT and 340 V/AT, respectively. This sensor's behavior can be explained by the similar J-FET model.

• 대한불안의학회지
• /
• 제9권1호
• /
• pp.25-30
• /
• 2013

공황장애 환자에서 12주간의 escitalopram 약물치료 결과, 공황장애 증상은 관해 상태에 이르렀고, 높은 불안민감도와 삶의 질 저하 및 기능장애가 모두 유의하게 호전되었다. 하지만 공황장애 환자들은 약물치료 후에도 여전히 상대적으로 높은 불안민감도와 삶의 질 저하 및 기능장애를 보여서 이의 회복을 위해서는 장기간의 약물치료가 필요할 수 있겠다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.2087-2092
• /
• 2005

Using disturbance observer (DOB) is effective in enhancing the performance of dynamic system in the presence of disturbances. Recently the definition of disturbance has been expanded to modeling uncertainty including parameter variation, internal disturbance. Various structures of DOB have been proposed to improve sensitivity of system for better disturbance rejection performance. However in the case of improvement of sensitivity function, it tends to bring poor transient response due to cross-coupling and phase lag. Furthermore it could be very sensitive to measurement noise due to increased peak of complementary sensitivity function. In this paper, a dual disturbance observer (Dual-DOB) is proposed to reduce the effect of such cross-coupling. It is possible for us to improve the sensitivity function with additional external DOB with hardly affecting complementary sensitivity function. Thus it is able to have robustness against measurement noise. Since we are able to design DOBs of internal and external loop independently, we could prevent transient response quality from degrading while improving the sensitivity function. The proposed Dual-DOB is applied to a commercial optical disk drive tracking servo system. The experimental result shows that the Dual-DOB is an effective method in rejecting the disturbance as well as improving the tracking performance.

• 대한지구과학교육학회지
• /
• 제7권2호
• /
• pp.266-275
• /
• 2014

The purpose of this study was to examine the effect of Earth System Education using multimedia on the elementary school students' environmental sensitivity and pro-environmental behavior. To verify this research problem, the subject of this study was fifth-grade students selected from two classes of M elementary school located in Busan city. For three months, the experimental group of 25 students was taught using multimedia. The comparison group also of 26 students was taught in normal classes which used a text-book. All students were given pre and post test to verify the effects of Earth System Education using multimedia on elementary school student's environmental sensitivity and pro-environmental behavior. The results from this study are as the following. First, Earth System Education using multimedia were effective on elementary school student's environmental sensitivity. Second, Earth System Education using multimedia were effective on elementary school student's pro-environmental behavior. Third, All most all experimental students were satisfied with Earth System Education using multimedia. In conclusion, Earth System Education using multimedia showed very positive effects on improvement of elementary school students' environmental sensitivity and pro-environmental behavior.

• 대한한의학회지
• /
• 제28권3호통권71호
• /
• pp.173-182
• /
• 2007

Objective : To develop an integrated curriculum for acupuncture treatment and pain sensitivity practice, and discuss its usefulness. Method : We established an integrated practice program incorporating acupuncture and pain on physiology perspectives, and measured pain sensitivity at Yin (PC6${\sim}$PC4) and Yang (TE5${\sim}$TE9) meridians before and after the acupuncture treatment. Results : The Yang (39.4${\pm}$23.5) and Yin (46.0${\pm}$25.5) meridians have significantly different degrees of pain sensitivity (n=118, p=0.018). Pain sensitivity was significantly decreased after acupuncture treatment at Yang (54.63${\pm}$28.02/ 40.81${\pm}$29.39) and Yin (56.13${\pm}$27.88/ 38.72${\pm}$25.17) meridians (n=16, p<0.001). Discussion and Conclusion : The difference between the Yin and Yang meridians can be materialized in this integrated practice curriculum model. The effectiveness of this integrated class and suggestions for improvement of integrated curricula were discussed.

• 한국항만경제학회지
• /
• 제22권1호
• /
• pp.87-103
• /
• 2006

The aim of this paper is to establish the evaluation system of improving urban logistics using the QFD(Quality function Deployment) model which can facilitate to grasp the improving degree of realizing the system conforming to the relationship of all process and the process improvement. At the first stage, the established system through the QFD method will be used to evaluate and diagnosis the level of urban logistics in Cheonbuk District. The second stage is to investigate the important components that can make prompt improvement of urban logistics. Then, the sensitivity analysis is to be performed and the degree of improving urban logistics will be presented according to the rising degree of the relevant components.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2007년도 하계종합학술대회 논문집
• /
• pp.331-332
• /
• 2007

This Paper deals with the high sensitive camera circuit design, which is more sensitive than those on the market now in a way that it got rid of chronic smearing problem in CCD sensor and other kinds of noises in video signal effectively. This paper focused on the principle of CCD and video signal process and analyzed the specialized technique of industry and fundamental high sensitivity of CCTV camera. 1 also looked into the SONY super-HAD CCD camera which is very popular in the field now and compared this with the SONY EXview CCD camera to analyze the picture improvement using video test equipment. For the result, it had 190mv on camera sensitivity, 14dB on smearing, and 2dB on signal to noise ratio.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1760-1765
• /
• 2007

This paper shows a derating design approach for LED reliability improvement. The LED is widely used in display devices or circuits. The main failure of interest is defined as 100% reduction of the light output intensity of LED resulting from corrosion due to stresses, i.e. temperature and humidity. The lifetime is varied according to the stress levels under where the LED operates so that correlation of the lifetime to these stress levels over time is modeled through accelerated life testings. A derating design approach to accomplish a required reliability level of LED is proposed to determine adequate the stress levels. In the approach, $B_{10}$ life, Failure rate, Sensitivity Analysis of LED are used as a reliability metric.

• Applied Science and Convergence Technology
• /
• 제23권6호
• /
• pp.328-339
• /
• 2014

In this article, plasma monitoring tools and mulivariate analysis techniques were reviewed. Optical emission spectroscopy was reviewed for a chemical composition analysis tool and RF V-I probe for a physical analysis tool for plasma monitoring. Multivariate analysis techniques are discussed to the sensitivity improvement. Principal component analysis (PCA) is one of the widely adopted multivariate analysis techniques and its application to end-point detection of plasma etching process is discussed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.780-785
• /
• 2001

A moving-magnet type pickup actuator is proposed, which has the back-yoke to improve th sensitivity. Through the magnetic path analysis, we can find that the flux density is increased i the air gap by the pole assignment of magnet and the adding of back-yoke can reduce the flu leakage and induce 40％ up of flux density. Experimental results show that the sensitivity i improved in the tracking direction, however, the improvement doesn't occur in the focusing direction. Finally, the compensation performance is tested in HD-DVD system. And it is verifie that the actuator can compensate the disc tilt of ${\pm}$0.7$^{\circ}$.