• 품질경영학회지
• /
• 제49권2호
• /
• pp.113-125
• /
• 2021

Purpose: This study focused on reality and quality improvement of aviation security equipment performance certification system. Methods: For this propose, we analyzed aviation security equipment performance certification system related legislations. Using analyzed data, we suggested advancement plan of aviation security equipment performance certification system. Results: In results, South Korea has been implementing aviation security performance certification system since October 2018. Parts for improvement of system are mutual certification with major countries that operate aviation security equipment performance certification systems, the spread of the defense industry's system, development of similar substances for handling explosives, and introduction of preliminary inspections. Conclusion: The research result could be used as a basic data for upgrading Korea's aviation security performance certification system.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2004년도 춘계학술대회
• /
• pp.145-151
• /
• 2004

Reliability assurance problem is an important issue in advanced company with good R&D capacity. In Korea, long-term and large-scale project for reliability improvement and certification have been conducted from 2000, 4 years ago. Generally, assurance is composed of system assurance and lot assurance. For reliability lot assurance. it is prerequisite to development reliability sampling plan with time-saving and minimum cost. In this paper, we aim to investigate previous study on reliability lot assurance focused on reliability sampling plans and propose some suggestions for the future study.

• 조명전기설비학회논문지
• /
• 제20권10호
• /
• pp.172-177
• /
• 2006

본 연구에서는 배전계통의 부하지점의 부하형태에 따른 정전비용의 영향을 고려하여 분산전원을 설치함으로써 운영비용 및 정전비용을 최소화하는 방안을 제안하였다. 가정용, 산업용, 상업용, 사무용 및 농업용 등 부하형태를 실제 계통과 유사하게 고려함으로써 정확한 신뢰도 지수와 운영비용을 구할 수 있고, 이를 통해 총 운영비용 최소화에 더욱 접근할 수 있다. 특히 정전시 각 부하지점에 설치된 분산전원에 의해 전력이 공급되어 전력구입 비용과 정전비용의 경우 효과적으로 감소됨을 알 수 있었으며, 정전빈도와 정전시간이 감소되어 전력 공급률이 향상되어 신뢰도 지수가 좋아졌음을 알 수 있었다.

• 산업공학
• /
• 제10권2호
• /
• pp.41-50
• /
• 1997

This paper considers the reliability computation of the network with dependent components and a software system is developed for supporting the reliability analysis and improvement of the system reliability. At first, We propose the common cause failure and load sharing models as the typical models considering the dynamic behaviors of networks with dependent components. Secondly, the algorithm is proposed to obtain the network reliability and reliability importance of component. The software, Delphi, is used to develop the our reliability analysis system.

• 품질경영학회지
• /
• 제34권1호
• /
• pp.54-72
• /
• 2006

In recent years, the widespread application of quality management and measurement reliability has put increasing emphasis on procedures for periodic instrument calibration. By optimizing calibration intervals, unnecessary calibrations can be minimized, thereby reducing costs. Moreover, optimizing intervals will improve compliance with regulatory directives while ensuring maximal compliance with reliability targets. In this paper, we present Calibration Interval Analysis Program developed using several establishment methodologies of calibration interval for measurement quality and reliability improvement. Also, we perform calibration interval analysis for some measurement instruments and analyse its results.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.759-767
• /
• 2009

대규모 연약지반개량 설계는 압밀영향인자의 불확실성으로 대부분 신뢰성해석을 도입하여 설계를 수행하는 추세이다. 신뢰성해석은 이론습득의 어려움으로 인하여 실무 기술자들에게 범용되지 못하고 있다. Duncan(2000)이 제안한 간편하고 유용하게 사용할 수 있는 신뢰성해석 간편법과 전통적인 신뢰성해석법의 해석결과를 비교하여 간편법의 적용성을 평가하였다. 민감도분석에서는 동일한 경향을 보였으나, 파괴확률은 약 20~50%의 오차를 보이고 확률변수의 확률분포에 따른 적용성이 떨어지는 것으로 평가되었다. 신뢰성해석 간편법은 개략설계시 결정론적해석과 상호 보완적으로 적용한다면 최적설계가 이루어질 수 있을 것으로 사료된다.

• 한국신뢰성학회:학술대회논문집
• /
• 한국신뢰성학회 2001년도 정기학술대회
• /
• pp.105-111
• /
• 2001

In this study, for improvement of pneumatic valve reliability, we grasped the falling-off problem in efficiency of domestic valve and performed detailed analysis the relating International standards, and we also decided sampling method and reliability evaluation items to be evaluated valves. And, in addition, we describe the developed evaluation standard to increase the competition power and to improve the reliability of domestic pneumatic valve manufacturers through deciding of test conditions and thesis of evaluation procedures to each evaluation items.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제5권4호
• /
• pp.451-463
• /
• 2005

This paper describes procedure to build a generic reliability analysis database structure and failure data during the conceptual design phase. Reliability prediction utilizing such supporting database system enable the designer to quantify the effects of varying design and operational constrains on mechanical component's failure rate. This leads to compare competing alternatives to the reliability improvement efforts.

• 한국신뢰성학회:학술대회논문집
• /
• 한국신뢰성학회 2005년도 학술발표대회 논문집
• /
• pp.147-155
• /
• 2005

When a failure or fault is detected, the product is adjusted or design change and is returned to its original condition before the failure or fault. Continuous improvement of the FMEA system is to determine an optimum product reliability that minimizes the total cost per unit time associated with inspection, repair, and the nondetection cost.

• 대한안전경영과학회지
• /
• 제6권2호
• /
• pp.231-239
• /
• 2004

To keep an enterprise's competitiveness on the condition of the automatic manufacturing system such as FA, FMS and CIM, all the maintenance problems should be considered seriously in not only in production and maintenance but also in related industrial productivity. This paper presents the study of equipment reliability improvement for rotary-machine vibration analysis. Based on these analyses, the maintenance management information system, and the machinery condition diagnosis technique are studied by using of the real-time diagnostic. Therefore, it is expected to improve the efficiency of business processes in the production and safety when we use this system.