• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1203-1204
• /
• 2007

In the methods for securing software quality and safety, two approaches - product centered approach and process centered approach - can be suggested. SPICE is a standard for the process improvement and the capability determination, which is planned for securing software quality and safety by the process centered approach. In this paper, general SPICE model, which is presented in ISO/IEC 15504 and Automotive SPICE model for automobile industry are analyzed. For securing railway software quality and safety, appropriate scheme to apply Automotive SPICE to railway software is proposed.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.58 no.4
• /
• pp.632-632
• /
• 2009

The purpose of this study is to present the range of defects mentioned in the Product Liability (PL) and to establish an objective basis and grounds for the analysis of accidents expected to happen by analyzing and presenting the external flame pattern and electrical characteristics of an LED streetlight lamp, a new lighting lamp. From the analysis of the cross-section of a cable carbonized by an external flame, it was observed that the wire's strand and insulation material had solidly adhered, and that greater voids were formed at the surface than at the center. Irregular carbide lumps were formed in the globe directly exposed to the flame, and the globe carbonized by the indirect flame showed characteristics that they had melted and flowed downward. It was found that the forward and backward resistances of the normal LED were approximately 1.74 [$M{\Omega}$] and 140 [$M{\Omega}$], respectively. The lamp burnt by the strong flame exhibited infinite forward and backward resistances and the LED did not emit light. The carbonized LED lamp was gray and exhibited fine delaminations. According to the Product Liability, a product defect signifies a simple product defect. Most of the defects were caused by the lack of stability, and the defect of the product itself occurred during the design and manufacture. The defects in warnings and markings include an insufficiency of handling manuals and warnings, expressive warranty violations, defective markings, etc. In order to prevent an accident resulting from a product, it is necessary to prepare safety warnings and documentation, establish clear-cut lines of liabilities, and subscribe insurances. However, it could be seen that important factors against the Product Liability were product improvement, response to compensation requests and law suits, credit restoration, etc.

• Journal of the Korean Society of Safety
• /
• v.32 no.2
• /
• pp.117-123
• /
• 2017

This study was intended to find methods of fire extinguishing system designs that can improve the equipment's usability. In this study, the fire suppression experiment through fire extinguishers and the data drawn through the experiment were analyzed, and then the guideline for the improvement of designs was presented. The procedure is as follows. A fire suppression experiment with the use of fire extinguishers was done by 43 average adults. The whole process of the fire suppression was videotaped, and then captured major scenes were analyzed with the use of RULA, a human engineering measurement tool. The analyzed data were divided into 4 steps, and then the guideline for design improvement was presented. The summary of the study is as follows. Step 1, Fire extinguisher distance step. To reduce overload occurring at the process of holding fire extinguishers suddenly, wheels are attached to the body of extinguishers, or pedestals are installed. Step 2, Fire extinguisher transportation step. The length of hose is extended, or fire fighting water is sprayed far, so that overload of legs occurring at the process of travel can be reduced. In addition, the weight of fire extinguisher shouldn't be over 2 kg. Step 3, Safety pin removal stage. Safety pins should be applied with button type, so that excessive posture of lower limbs and excessive twisting of wrists won't happen during safety pin removal process. Besides, safety pins should be designed for easy identification and operation. Step 4, Fire extinguishing agent spraying step. To reduce overload occurring at sudden spraying of fire fighting water, pressure should be increased gradually until high pressure. With the above study results applied to existing fire extinguisher design, it may contribute to reducing any fire damage.

• The Korean Journal of Air & Space Law and Policy
• /
• v.26 no.1
• /
• pp.31-63
• /
• 2011

Since Korea has invested only on developing an aircraft, it is true that Korea has neglected detailed standards and procedures about certification activities including essential safety procedures. Most developed countries have implemented mandatory airworthiness system by legislating it for operational safety of aircraft based on ICAO Annex 8, and the U.S. Department of Defense and the FAA's Airworthiness system have been adapted it to the realities of their circumstance. Therefore, Airworthiness system that can guarantee the safety of the aircraft at international level is necessary to enhance flight safety and to create export opportunities of an aircraft as a country which can develop an aircraft by itself To achieve this, a study on the improvement of aircraft airworthiness was carried out by analyzing the problem of domestic airworthiness system and by reflecting international best practices on the establishment of a system for improved Airworthiness.

• Korean Journal of Organic Agriculture
• /
• v.27 no.1
• /
• pp.17-32
• /
• 2019

The objective of this study is to investigate the effect of pesticide-related accident on prices and sales of eggs and the perception of food safety accidents among consumers. For this, we analyzed the impact of the pesticide incident on consumers' purchases by separating large discount stores and eco-friendly specialty stores with econometrics methods. In addition, the value changes for each egg certification were analyzed after the accident. Perception of food safety accidents was conducted through a survey to investigate the awareness of the pesticide-related accidents, changes in purchases, and the causes of the pesticide accidents. Furthermore, the risk analysis was conducted. This results show the importance of trust and communication in food safety accidents between distributors, consumers and concerned authorities. Also, after the accident, consumers' interest and premium exist in the breeding process such as animal welfare, not only in the final product. Therefore in order to actively respond to food safety accidents such as pesticides-related accident, response and improvement are necessary considering various aspects such as risk assessment, risk management, and risk communication.

• Industrial Engineering and Management Systems
• /
• v.13 no.2
• /
• pp.203-209
• /
• 2014

This research designed and implemented a supply chain risk management platform and applied it to a case study of reduced-fat Lanna pork sausage as a new product development project. The proposed framework has three stages: risk identification, risk assessment, and risk mitigation. Seventeen risk agents with 17 risk events were identified based on SWOT analysis and the Porter Five Forces concept through the process of planning, sourcing, making and delivering, partially captured from the supply chain operations reference model in the first stage. In the second stage, an house of risk (HOR) framework was applied to present the impacts of each risk agent. In the third stage, eight risk agents with high impact were selected to design 21 preventive actions. Finally, three preventive actions with the highest effectiveness to difficulty ratio scores-'sales evaluation of familiar products', 'increasing distribution channels and promotions to improve sales', and 'work flow improvement for work safety'-were then recommended for this new product development.

• International Journal of Advanced Culture Technology
• /
• v.9 no.2
• /
• pp.72-79
• /
• 2021

This study is to develop a strategy to prepare an improvement strategy according to the environmental change of the hotel. Currently, domestic hotels are implementing marketing through food and beverage as a countermeasure against the sales decrease, and in order to develop effective marketing plan, 5 Force Model environmental analysis and STP analysis are analyzed. 5 Force Model Environmental Analysis showed that domestic hotels are facing various difficulties such as the expansion of accommodation sharing system, the decrease of Chinese tourists due to the THAAD problem, the increase of hotels, the introduction of PMS, the increase of minimum wage, the introduction of 52 hours work week, and the increase in product preference As an STP response strategy to correspond these difficulties, it is necessary to develop products for the main customers of the hotel food and beverage, such as those in the 20s-30s, the workers, smartphones and SNS users. And also hotels should seek ways to lower price of the product to the level desired by the user to compete against substitutes. In conclusion we suggest that hotels are committed to fulfilling their role by meeting guest safety and COVID-19 compliance requirements, but a focus on immediate cleanliness and quarantine against infectious diseases, like Airbnb, will enable greater growth.

• Journal of Arbitration Studies
• /
• v.10 no.1
• /
• pp.92-113
• /
• 2000

Products liability refers to the liability of any or all parties along the chain of manufacture of any product for damage caused by that product. This includes the manufacturer of component parts (at the top of the chain), an assembling manufacturer, the wholesaler, and the retail store owner (at the bottom of the chain). Products containing inherent defects that cause harm to a consumer of the product, or someone to whom the product was loaned, given, etc., are the subjects of products liability suits. The goal of products liability system should be to maximize consumer welfare by efficiently providing just compensation for injuries incurred and deterring future injuries without unreasonably impeding the supply of the goods and services to consumers. Some advanced countries, apart from relying on products liability systems, also apply other policies and legislation directly aimed at the safety of the consumer. The application of general safety policies as well as products liability rules is not costless. An efficient system will not eliminate risk from society. An efficient system ... that maximises consumer welfare ... maximises the benefits while minimising the costs. Products liability claims can be based on negligence, strict liability, or breach of warranty of fitness depending on the jurisdiction where the claim is based. In view of international business and law circumstances, it should be stressed that international enterprises in Korea should consider how to cope with the situation of international transaction. International enterprises should have a correct perception about products liability which is to contribute the stabilization and improvement of the people's life and the sound develpement of the national economy. Products liability system creates incentives that influence behaviour and performance in ways that are desirable, such as more diligent monitoring to prevent defective products from reaching the market-place. At the same time, any liability system will impose burdens that are undesirable, such as greater costs imposed on business and consumers and reduced avaiability of consumer goods. The concern for society is to balance. The ideal situation is where the cost imposed on producers of goods and services pushes them to a desirable level of care but not so far that producers reach undesirable level of caution that may deprive consumers unnecessarily of the benefits from new and innovative products.

• Journal of Korean Society of Rural Planning
• /
• v.22 no.1
• /
• pp.101-111
• /
• 2016

The purpose of this study is to investigate the roadside agricultural product shops located in Miryang city, and to find out the current situation on how people rate the importance and satisfaction levels of various aspects through surveys on sellers and consumers. With this information, the main problems and possible solutions are analyzed with the Important Performance Analysis(IPA) method. First, building parking spaces for customers should be prioritized to improve safety. Because many roadside shops for agricultural products are located alongside two-lane roads, sufficient parking spaces are needed for the consumers' safety. Second, to enhance the rural landscape, consumers express that improving store quality and integrating more with the environment are important. Store owners should take more care in maintaining store quality so that customers do not experience inconvenience while shopping. Futhermore, institutional guidelines and standards must be implemented to allow for a more harmonious relationship between these shops and the environment. Third, both sellers and consumers think that taste, price, and freshness are important aspects of roadside agricultural product shops. However, while sellers and consumers both agree that the price is the most important factor, there is a discrepancy between these two groups regarding the satisfactory price level. The sellers do not agree that their products are being sold at the fair price. This can be interpreted as sellers believe that the prices are set too low. Because pricing is important aspect and also a very delicate issue, mid to long term consideration and study will be needed to improve roadside shops for agricultural products in the future.

• Textile Coloration and Finishing
• /
• v.26 no.3
• /
• pp.181-186
• /
• 2014

This paper surveys improvement characteristics in muscle fatigue with bio-activity material imbedded fabric. For this purpose, the subjects wear the garment which is covered by bio-activity materials all over every day during 2 weeks of experimental period. After 2 weeks period, VAS(Visual Analogue Scale) index evaluation regarding muscle fatigue and pain has been conducted in comparison between before wearing and after so that we can evaluate the effect on muscle fatigue improvement. The effectiveness survey for testing products consists of improvement on krunkle, muscle fatigue and exercise capacity. As a result, 100% of test subject group completes a questionnaire with positive answer as above normal in every question. In addition the preference of testing products is researched in wearing comfort, activity and convenience. And it is marked above normal by 100% of test subject group as well. Moreover any kind of unusual skin reaction has not been detected in safety evaluation. Therefore this testing products is being judged as a beneficent product for improvement on muscle fatigue without any skin irritation.