• 한국유체기계학회 논문집
• /
• 제14권5호
• /
• pp.63-68
• /
• 2011

This paper presents an optimization procedure for performance improvement of a tunnel ventilation jet fan. Optimization techniques based on response surface approximation (RSA) are employed to improve the aerodynamic performance of a tunnel ventilation jet fan. For numerical analysis, three-dimensional Renolds- averaged Navier-Stokes (RANS) equations with shear stress transport turbulence model are discretized by using finite volume approximations and solved on hexahedral grids to evaluate the total efficiency at the operating condition as the objective function. Four geometric variables defining the meridional length and the thickness profile at the hub and shroud in the jet fan rotor are selected as design variables for the numerical optimization. The results of the numerical optimization show that the total efficiency of the optimized model is significantly improved in comparison with the base model.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권1호
• /
• pp.68-74
• /
• 2015

본 논문은 정격속도 이상의 고속 영역에서 운전되는 스위치드 릴럭턴스 발전기의 효율 개선에 대하여 기술한다. 전류 형상은 발전기 손실에 큰 영향을 미치기 때문에 전류 모양을 조정함으로서 시스템 효율이 개선될 수 있다. 풍력 또는 소수력 발전과 같이 속도 범위가 넓은 경우 정격속도 이상에서도 최적의 전류 형상을 얻을 수 있도록 스위칭각 조정 방법이 제시된다. 제시된 방법을 검증하기 위해 실험장치가 구성되고, 이론의 가능성이 시뮬레이션과 실험결과에 의해 검증된다.

• 전기학회논문지
• /
• 제60권7호
• /
• pp.1339-1346
• /
• 2011

This paper is developed to demand management scenario of energy consumption efficiency improvement, electricity generation efficiency improvement, network efficiency improvement, change of distribution ratio, movement of energy source, change of heating system, put of CHP to quantitatively assess to impact on energy use of demand management at the national level. This scenario can be applied Energy System Management model was developed based on Energy Balance Flow. In addition, effect analysis through built demand management scenario was quantitatively evaluated integrated demand management effectiveness of energy cost saving, CO2 emission reduction and energy savings of national level by calculating to primary energy source usage change in terms of integration demand management effect more often than not a single energy source separated electricity, heat and gas.

• 시스템엔지니어링학술지
• /
• 제20권spc1호
• /
• pp.30-44
• /
• 2024

The DMAIC methodology, which is most familiar to battery production system developers, is partially inadequate in its conformity to utilize battery production system tasks, so it is necessary to improve the function and structure of the methodology, but many battery production system developers use the DMAIC method based on experience, causing side effects such as confusion, delay in tasks, and insufficient performance during tasks. Accordingly, we intend to conduct an empirical study to improve the "efficiency improvement and conformity evaluation method" so that the DMAIC methodology can be used more reasonably and easily. Using the three-stage research model, we derive components that affect conformity through literature and questionnaire surveys in the first stage, use relational characteristics between components in the second stage to confirm the effect on conformity, and use the relational characteristics in the third stage to confirm the possibility of improving efficiency by applying them to the DMAIC methodology in actual cases. Finally, the "Conformity Assessment Index (CAI) equation" based on relational characteristics is established to enable effective conformity evaluation and continuous improvement.

• 대한기계학회논문집B
• /
• 제39권3호
• /
• pp.285-291
• /
• 2015

원심분리기는 밀도가 다른 입자들이 관내에서 고속의 회전에 의해 발생되는 원심력을 받게 되면 원심력에 비례하는 속도로 밀도가 큰 입자는 빠르게 침강하고, 밀도가 작은 입자는 느리게 침강하여 관내에서의 이동거리에 차이가 발생하는 원리를 이용하는 장치이다. 본 연구의 대상이 되는 디캔터형 원심 분리기는 수 처리 공정에서 탈수된 농축 오물을 제거하는 장치로서 사용되는 것으로 슬러지 이송의 향상이 그 핵심 기술이다. 이에 본 논문에서는 이를 향상시키기 위하여 보울 플레이트 레일을 적용한 모델을 제안하였고, 슬러지 이송 효율 향상을 평가하기 위하여 입자 완화 유체동역학 기법을 이용하여 분석하였다. 수행된 해석은 보울 플레이트를 적용하지 않은 모델과 적용한 모델에 대하여 각각 적용하여 그 개선 정도를 정량화 하였다.

• 한국컴퓨터정보학회논문지
• /
• 제17권10호
• /
• pp.99-105
• /
• 2012

지그비는 저 전력, 저 비용, 낮은 데이터 전송 속도의 특징을 가지는 무선 개인 망(Low Rate Wireless Personal Area Networ: LR-WPAN)의 표준이다. 방향성 메시징 기법은 방송을 사용하는 무선 센서 네트워크에서 방향정보를 가지는 메시지를 특정 영역으로 전송함으로써 중복 메시지 전송을 줄이는 것을 통하여 에너지 효율성을 높이는 프로토콜이다. 본 논문에서는 에너지 효율성 향상을 위하여 방향성 메시징을 지원하도록 수정한 지그비를 사용하는 실험용 격자형 센서 네트워크를 설계하고 구현한다. 본 논문의 실험용 센서 네트워크는 방향성 정보를 사용하도록 수정한 ADV 메시지와 라우팅 관리 모듈을 지원하는 Nano-24 노드로 구성한다. 실험용 센서 네트워크의 에너지 효율 향상성은 실제 ADV 메시지 전송에 따른 실험 결과 분석울 통하여 나타내 보인다.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 1998년도 The 12th Asia Quality Management Symposium* Total Quality Management for Restoring Competitiveness
• /
• pp.673-679
• /
• 1998

The paper aims to apply a model of continuous quality improvement (CQI) to Taiwan provincial Pin Ton hospital. Tools of quality control were used both total quality management (TQM) and quality control circle (QCC) in order to approach the objective of ${\ulcorner}$higher quality, higher efficiency, lower cost${\lrcorner}$. During two years, this hospital has organized thirteen QC circles that were classified three categories according to that objective: four circles work for higher quality; the other four circles work for higher efficiency; five circles for lower cost. After implementation, several results were found from two viewpoints. From viewpoint of tangibility, one of the most outcomes is to reduce labor cost from 56 persons to 28 persons of temporary employees. From viewpoint of intangibility, the result was evaluated using radar chart to compare the difference after improvement. This paper is going to report the process of CQI for the hospital management because it is a new issue in Taiwan since 1997

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 춘계 학술논문 발표대회
• /
• pp.211-212
• /
• 2015

Procurement and lifting scheduling of modules and resources in modular construction, where modules that are manufactured from factory are delivered and assembled on site, is a crucial factor that determines the efficiency of the whole construction. However, previous studies have barely acknowledged the significance of resource procurement process and lifting of modules in modular construction. Therefore, this research aims to derive factors that are in need of improvement for successful implementation of procurement and lifting efficiency, and visualize them according to their importance and performance on improvement through IPA(Important Performance Analysis).

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 춘계학술대회 논문집
• /
• pp.392-399
• /
• 2009

This study investigates and analyzed electrical energy curtailment effect by each business department and by energy use efficiency elevation equipment because do an energy use plan that is enforced in each variety business that is developed in domestic by model. When plan the recent electrical energy use with this, I wish to contribute in energy use general planning establishment improvement that is aiming energy efficiency improvement newly by groping improvement plan moment deduce problem. Specially, search present condition and problem by electrical energy curtailment equipment application that probes mass and analyzed, and is applied in present our country according to analysis contents to the latest energy use plan that was enforced on energy use rationality narration but allowed purpose.

• Journal of the Optical Society of Korea
• /
• 제12권4호
• /
• pp.303-308
• /
• 2008

Directly modulated fiber-optic links generally suffer higher link loss and larger signal distortion than externally modulated links. These result from the electron-photon conversion loss and laser modulation dynamics. As a method to overcome the drawbacks, we have experimentally demonstrated the RF performance of directly modulated, ultra-strong injection-locked gain-lever distributed Bragg reflector (DBR) lasers. The free-running DBR lasers exhibit an improved amplitude modulation efficiency of 12.4 dB under gain-lever modulation at the expense of linearity. By combining gain-lever modulation with ultra-strong optical injection locking, we can gain the benefits of both improved modulation efficiency from the gain-lever effect, plus improved linearity from injection locking. Using an injection ratio of R=11 dB, a 23.4-dB improvement in amplitude response and an 18-dB improvement in spurious-free dynamic range have been achieved.