• Journal of The Korean Association of Information Education
• /
• v.18 no.4
• /
• pp.483-490
• /
• 2014

Smart classrooms have been set up nationwide to utilize smart devices for teaching and learning in the knowledge- based society, As this trend might quickly spread, we have investigated the utilization levels, and issues around the facilities from the experienced teachers. In order to study the impact of easy access to smart devices, the teacher sampling groups were divided into two: one teacher group responsible for smart classrooms and the other group teaching in ordinary classrooms. Survey questions dealt with teacher needs analyses, their expectation of their students' attitude changes, their satisfaction and utilization levels of smart devices currently built in classrooms. The results showed us that teachers have vague expectation about the smart devices and want more highly applicable devices for instruction, improvement of their compatibility with other multimedia devices or applications as well as to improve the resolution of electronic boards. and basic functions of information search and videos that they use everyday.

• International journal of advanced smart convergence
• /
• v.12 no.4
• /
• pp.443-450
• /
• 2023

One of the basic tasks in the automobile manufacturing process is to design a bare chassis, which is the basic frame of a vehicle, and a bracket is a member connecting various devices to the frame. Bracket, which is a member connecting the engine, transmission, and suspension, which are the core devices of driving and operating the vehicle, to the frame, must maintain safety during vehicle operation. If the bracket connecting the various devices constituting the vehicle to the frame does not have durability, serious accidents may occur during operation of the vehicle. In this study, we performed stress analysis on the brackets installed in the bare chassis of the 25-passenger bus in the development stage. Based on the stress analysis performed, an improved bracket dimension was proposed.

• Transactions on Electrical and Electronic Materials
• /
• v.18 no.5
• /
• pp.279-286
• /
• 2017

In this paper, an optimal approach for the wide-area regulation of control devices in a transmission network is proposed. In order to realize an improved voltage profile and reduced power loss, existing devices such as tap-changing transformers, synchronous machines, and capacitor banks should be controlled in a coordinated and on-line manner. It is well-understood that phasor measurement units in transmission substations allow the system operators to access the on-line loading and operation status of the network. Accordingly, this study proposes efficient software applications that can be employed in area operation centers. Thus, the implanted control devices can be regulated in an on-line and wide-area coordinated approach. In this process, efficient objective functions are devised for both voltage profile improvement and power loss reduction. Subsequently, sensitivity analysis is carried out to determine the best weighting factors for these objectives. Extensive numerical studies are conducted on an IEEE 14-bus test system and a real-world system named the Azarbayjan Regional Transmission Network. The obtained results are discussed in detail to highlight the promising improvements.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.108-111
• /
• 2004

An efficiency and brightness of the Organic Light-emitting Diodes(OLEDs) by insertion of the novel layer between a singlet emitter and an electron transporting layer without doping processes, has been improved. The novel layers named as the K-M1 and K-M2 layers have shown the excellent improvement in the carrier balance and recombination efficiency. New devices using the K-M1 and K-M2 layers have shown a high efficiencies of over 15cd/A and 61m/W$(at\;20mA/cm^2)$, and brightness of over $16,000cd/m^2(at\;100mA/cm^2)$, respectively.

• Journal of the Korean School Mathematics Society
• /
• v.3 no.2
• /
• pp.133-154
• /
• 2000

The purpose of this study is to analyze theoretically suggested performance test and find out the actual conditions is math class at high schools and to suggest some devices for improvement for the various problems. To achieve this goal of study, I applied a performance test to the first graders of high school for one semester, and analyzed various phenomena which appeared during its practice. I made several questionnaire based on the materials of an academic seminar, "Several questions and devices for the improvement on mathematics performance test" And through the analysis, I pointed several problems of the performance test and proposed alternative plans. Several practical alternatives can be suggested for the problems appeared in the operation of performance test. The most important thing than any other technical solution in teachers′ diverse endeavor and enthusiastic research attitude to overcome the difficulties. Teachers′ spontaneousness is the foundation to enhance their own specialty and eradicate the propriety of the performance test.

• Journal of information and communication convergence engineering
• /
• v.3 no.3
• /
• pp.137-141
• /
• 2005

The paper presents some methods to improve characteristics of film bulk acoustic resonator (FBAR) devices. The FBAR devices were fabricated on Bragg reflectors. Thermal treatments were done by sintering and/or annealing processes. The measurement showed a considerable improvement of return loss $(S_{11})$ and quality factor $(Q_{s/p}).$ These thermal treatment techniques seem very promising for enhancing FBAR resonance performance.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.05a
• /
• pp.244-245
• /
• 2019

Recently, a variety of window cleaning devices have been developed. There are, however, few cases of anticipated problems and countermeasures that may arise after these devices are installed. Therefore, in this study, the emergency condition was derived and the emergency scenario was derived for the rail-mounted cleaning device. Emergency scenarios and countermeasures derived from this study will be used for continuous improvement and supplementation of cleaning devices through prototyping and testing.

• Proceedings of the KSR Conference
• /
• 2003.05a
• /
• pp.480-486
• /
• 2003

This paper proposes the connection without cables among display devices in a train using piconet of the Bluetooth. Nowadays, each train has a number of the display devices that are connected with many cables to lead the passengers, so it has the waste of resource and factor of fault. This paper proposes the improvement schemes of those problems in a train using piconet of the bluetooth with low cost, low power, and high security.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.28-34
• /
• 2011

The carbody underframe of TTX vehicle should be modified a lot for the installation of new devices such as an active suspension system between the bogie and the carbody of TTX vehicle, because the carbody underframe is one body structure consisting of a center sill welded with a carbody bolster. Modification operation of the carbody takes a lot of time and cost, because the huge sized carbody structure should be moved to a machining apparatus and machined to guarantee the manufacture accuracy of new device installation brackets. For this reason, modification operation improvement is needed to install new devices more efficiently between the bogie and the carbody. This paper introduce the development of 'bogie/carbody interface bolster' that not only supports the carbody weight but also enables new devices to be installed more efficiently between the bogie and the carbody. This development has advantage to reduce working time and cost to install new devices such as an active suspension system between the bogie and the carbody by minimizing the modification of the carbody of TTX vehicle.

• Journal of information and communication convergence engineering
• /
• v.1 no.4
• /
• pp.199-204
• /
• 2003

In this paper, we present the thermal annealing effects of the W/$SiO_2$ multi-layer reflectors in ZnO-based FBAR devices with cobalt (Co) electrodes in comparison with those with aluminum (Al) electrodes. Various thermal annealing conditions have been implemented on the W/$SiO_2$ multi-layer reflectors formed on p-type (100) silicon substrates. The resonance characteristics could be significantly improved due to the thermal annealing and were observed to depend strongly on the annealing conditions applied to the reflectors. Particularly, the FBAR devices with the W/$SiO_2$ multi- layer reflectors annealed at $400^{\circ}C$/30min have shown superior resonance characteristics in terms of return loss and quality-factor (Q-factor). In addition, the use of Co electrodes has resulted in further improvement of the resonance characteristics as compared with the Al electrodes. As a result, the combined use of both the thermal annealing and Co electrodes seems very useful to more effectively improve the resonance characteristics of the FBAR devices with the W/$SiO_2$ multi-layer reflectors.