• Title/Summary/Keyword: Improved P&O

Search Result 751, Processing Time 0.026 seconds

Fabrication and Characteristics of $Al_2O_{3p}$/AC8A Composites by Pressureless Infiltration Process (무가압함침법에 의한 $Al_2O_{3p}$/AC8A 복합재료의 제조 및 특성)

  • 김재동;고성위;정해용
    • Composites Research
    • /
    • v.13 no.6
    • /
    • pp.1-8
    • /
    • 2000
  • The fabrication Process of $Al_2O_{3p}$/AC8A composites by pressureless infiltration technique and the effects of additive Mg content and volume fraction of particulate reinforcement on mechanical and wear properties were investigated. It was found that the bending strength decreased with increasing volume fraction of $Al_2O_{3p}$ particles. Whereas hardness increased with volume fraction of $Al_2O_{3p}$ particles. The decrement of strength in case of high volume fraction of $Al_2O_{3p}$ particles was attributed to high porosity level. In terms of additive Mg content, $Al_2O_{3p}$/AC8A composites containing around 5~7wt% of additive Mg indicated the highest strength, and hardness values increased with additive Mg contents. Wear resistance of AC8A alloy were improved by reinforcement of $Al_2O_{3p}$ particles especially at high sliding velocity. Wear property of $Al_2O_{3p}$/AC8A composites and AC8A alloy exhibited different aspects. $Al_2O_{3p}$/AC8A composites indicated more wear loss than AC8A alloy at slow velocity region. However a transition point of wear loss was found at middle velocity region which shows the minimum wear loss and wear loss at high velocity region exhibited almost same value as at slow velocity region, whereas wear loss of AC8A alloy almost linearly increased with sliding velocity. It was found that $Al_2O_{3p}$/AC8A composites containing $Al_2O_{3p}$ volume fraction of 20% exhibited abrasive wear surface regardless of sliding velocity and $Al_2O_{3p}$/AC8A composites containing $Al_2O_{3p}$ volume fraction of 40% showed slightly adhesive wear surface at low sliding velocity, and it progressed to severe wear as increasing the sliding velocity.

  • PDF

Preliminary study to investigate the effects of zinc oxide on growth performance, total tract digestibility, and fecal scores in growing pigs fed a diet based on corn and wheat

  • Shanmugam Sureshkumar;In Ho Kim
    • Korean Journal of Agricultural Science
    • /
    • v.49 no.1
    • /
    • pp.163-170
    • /
    • 2022
  • This study investigates the effects of the dietary inclusion of zinc oxide (ZnO) on the growth performance, apparent total digestibility, and the fecal scores of growing pigs fed a corn-wheat-based diet. In total, 84 crossbred (Landrace × Yorkshire × Duroc) growing pigs with an initial body weight of (20.86 ± 0.64 kg) (4 pigs·pen-1; 2 gilts and 2 barrows; 7 replications·treatment-1) were randomly assigned to three treatment groups based on body weight (BW) and sex in a three-week trial. The dietary treatments were as follows: TRT1 (CON [basal diet]), TRT2 (CON + 0.07% ZnO), and TRT3 (CON + 1% ZnO). Dietary ZnO supplementation significantly (p < 0.05) improved body weight gain (BWG) of growing pigs at weeks 2 and 3 compared to the control diet. In addition, dietary ZnO supplementation significantly (p < 0.05) increased the average daily gain (ADG) and average daily feed intake (ADFI) at weeks 2, 3, and overall. However, the feed conversion ratio (FCR) remained unaffected throughout the trial. Regarding the total tract nutrient digestibility of nitrogen, dry matter was significantly improved with an increased level of ZnO supplementation. In addition, dietary supplementation of ZnO significantly reduced fecal scores in grower pigs at the initial period compared to the control diet. In summary, dietary inclusion of zinc oxide via supplementation improved growth performance, and total tract digestibility and reduced the fecal scores of growing pigs.

Properties of the RF Sputter Deposited n-ZnO Thin-Film and the n-ZnO/p-GaN heterojunction LED (RF스퍼터링법으로 성장시킨 n-ZnO 박막과 n-ZnO/p-GaN 이종접합 LED의 특성)

  • Shin, Dongwhee;Byun, Changsub;Kim, Seontai
    • Korean Journal of Materials Research
    • /
    • v.23 no.3
    • /
    • pp.161-167
    • /
    • 2013
  • The ZnO thin films were grown on GaN template substrates by RF magnetron sputtering at different RF powers and n-ZnO/p-GaN heterojunction LEDs were fabricated to investigate the effect of the RF power on the characteristics of the n-ZnO/p-GaN LEDs. For the growth of the ZnO thin films, the substrate temperature was kept constant at $200^{\circ}C$ and the RF power was varied within the range of 200 to 500W at different growth times to deposit films of 100 nm thick. The electrical, optical and structural properties of ZnO thin films were investigated by ellipsometry, X-ray diffraction (XRD), atomic force microscopy (AFM), photoluminescence (PL) and by assessing the Hall effect. The characteristics of the n-ZnO/p-GaN LEDs were evaluated by current-voltage (I-V) and electroluminescence (EL) measurements. ZnO thin films were grown with a preferred c-axis orientation along the (0002) plane. The XRD peaks shifted to low angles and the surface roughness became non-uniform with an increase in the RF power. Also, the PL emission peak was red-shifted. The carrier density and the mobility decreased with the RF power. For the n-ZnO/p-GaN LED, the forward current at 20 V decreased and the threshold voltage increased with the RF power. The EL emission peak was observed at approximately 435 nm and the luminescence intensity decreased. Consequently, the crystallinity of the ZnO thin films grown with RF sputtering powers were improved. However, excess Zn affected the structural, electrical and optical properties of the ZnO thin films when the optimal RF power was exceeded. This excess RF power will degrade the characteristics of light emitting devices.

Enhanced Antibacterial Activity of Sodium Hypochlorite under Acidic pH Condition (산성 pH 조건에서 차아염소산나트륨의 항균 활성 향상)

  • Son, Hyeon-Bin;Bae, Won-Bin;Jhee, Kwang-Hwan
    • Microbiology and Biotechnology Letters
    • /
    • v.50 no.2
    • /
    • pp.211-217
    • /
    • 2022
  • Sodium hypochlorite (NaClO) is a disinfectant widely used in hospitals and food industries because of its antimicrobial activity against not only bacteria but also fungi and virus. The antibacterial activity of NaClO lies in the maintenance of a stable hypochlorous acid (HClO) concentration, which is regulated by pH of the solution. HClO can easily penetrate bacterial cell membrane due to its chemical neutrality and the antibacterial activity of NaClO is thought to depend on the concentration of HClO in solution rather than hypochlorite ions (ClO-). In this study, we investigated the antibacterial activity of NaClO according to pH adjustment by means of time kill test and assays of Reactive Oxygen Species (ROS) and adenosine triphosphate (ATP) concentration changes before and after NaClO treatment. We also investigated that the degree of cell wall destruction through field emission scanning electron microscopy (FE-SEM). Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) exposed to 5 ppm NaClO at pH 5 exhibited 99.9% mortality. ROS production at pH 5 was 48% higher than that produced at pH 7. In addition, the ATP concentration in E. coli and S. aureus exposed to pH 5 decreased by 94% and 91%, respectively. As a result of FE-SEM, it was confirmed that the cell wall was destroyed in the bacteria by exposing to pH 5 NaClO. Taken together, our results indicate that the antibacterial activity of 5 ppm NaClO can be improved simply by adjusting the pH.

Hot melt extruded-based nano zinc as an alternative to the pharmacological dose of ZnO in weanling piglets

  • Oh, Seung Min;Kim, Min Ju;Hosseindoust, Abdolreza;Kim, Kwang Yeol;Choi, Yo Han;Ham, Hyung Bin;Hwang, Sung Jun;Lee, Jun Hyung;Cho, Hyun Jong;Kang, Wei Soo;Chae, Byung Jo
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.33 no.6
    • /
    • pp.992-1001
    • /
    • 2020
  • Objective: This study was conducted to investigate the effects of hot-melt extruded ZnO nano-particles (HME-ZnO) as an alternative for P-ZnO on growth performance, nutrient digestibility, Zn bioavailability, intestinal microbiota, and intestinal morphology of weanling pigs. Methods: A total of 450 piglets (Landrace×Yorkshire×Duroc) were randomly allotted to five treatments based on initial body weight and sex. The experimental diets were fed in a meal form as phase 1 from d 0 to 14 and phase 2 from d 15 to 28. Treatments were the control diet without ZnO supplementation, the diet containing 2,500 ppm Zn as ZnO, and three diets containing 500, 1,000, or 2,500 ppm Zn as HME-ZnO. Results: The overall result showed a higher (p<0.01) average daily gain in weanling pigs fed ZnO-supplemented diets in comparison to the control diet. There was a decrease (p<0.01) in fecal score in the ZnO-supplemented diets. Dietary supplementation of ZnO improved (p<0.05) crude protein digestibility. The weanling pigs fed the P-ZnO diet had a lower (p<0.01) Zn digestibility in the feces than HME-ZnO supplemented treatments. Weanling pigs fed diets supplemented with ZnO had greater (p<0.05) Lactobacillus spp. populations and lower Clostridium spp. (p<0.05) and Coliforms (p<0.01) populations in the ileum. Weanling pigs fed diets supplemented with increasing concentrations of HME-ZnO linearly decreased Clostridium spp. (p<0.05) and Coliforms (p<0.01) in the ileum. Lower (p<0.05) Clostridium spp. and Coliforms counts in the colon were observed in pigs fed with ZnO-supplemented diets. Weanling pigs fed diets supplemented with ZnO showed a greater (p<0.01) villus height in the duodenum. Conclusion: Dietary supplementation of HME-ZnO and P-ZnO showed a potential to improve the digestibility of protein, intestinal Coliform and Clostridium, villus height in duodenum and ileum. Moreover, HME-ZnO showed a higher Zn digestibility compared with P-ZnO.

Dependence of the Diode Characteristics of ZnO/b-ZnO/p-Si(111) on the Buffer Layer Thickness and Annealing Temperature (버퍼막 두께 및 버퍼막 열처리 온도에 따른 ZnO/b-ZnO/p-Si(111)의 전기적 특성 변화 및 이종접합 다이오드 특성 평가)

  • Heo, Joo-Hoe;Ryu, Hyuk-Hyun
    • Journal of the Korean Vacuum Society
    • /
    • v.20 no.1
    • /
    • pp.50-56
    • /
    • 2011
  • In this study, the effects of ZnO buffer layer thickness and annealing temperature on the heterojunction diode, ZnO/b-ZnO/p-Si(111), were reported. The effects of those on the structural and electrical properties of zinc oxide (ZnO) films on ZnO buffered p-Si (111) substrate were also studied. Structural properties of ZnO thin films were studied by X-ray diffraction and I-V characteristics were measured by a semiconductor parameter analyzer. ZnO thin films with 70 nm thick buffer layer and annealing temperature of $700^{\circ}C$ showed the best c-axis preferred orientation. The best electrical property was found at the condition of buffer layer annealing temperature of $700^{\circ}C$ and 50nm thick ZnO buffer layer (resistivity: $2.58{\times}10^{-4}[{\Omega}-cm]$, carrier concentration: $1.16{\times}1020[cm^{-3}]$). The I-V characteristics for ZnO/b-ZnO/p-Si(111) heterojunction diode were improved with increasing buffer layer thickness at buffer layer annealing temperature of $700^{\circ}C$.

Inhibitory effects of 2,6-di-tert-butyl-4-hydroxymethylphenol on asthmatic responses to ovalbumin challenge in conscious guinea pigs

  • Jeong, Seul-Yong;Lee, Ji-Yun
    • The Korean Journal of Physiology and Pharmacology
    • /
    • v.22 no.1
    • /
    • pp.81-89
    • /
    • 2018
  • This study evaluated the anti-asthmatic activities of 2,6-di-tert-butyl-4-hydroxymethylphenol (DBHP) that is a potent phenolic antioxidant in edible vegetable oil. The effects of DBHP on bronchial asthma were evaluated by determining the specific airway resistance (sRaw) and tidal volume (TV) during the immediate asthmatic response (IAR) and the late-phase asthmatic response (LAR) in guinea pigs with aerosolized ovalbumin-induced asthma. Recruitment of leukocytes and the levels of biochemical inflammatory mediators were determined in the bronchoalveolar lavage fluids (BALFs), and histopathological surveys performed in lung tissues. DBHP significantly inhibited the increased sRaw and improved the decreased TV on IAR and LAR, and also inhibited recruitment of eosinophils and neutrophils into the lung, and release of biochemical inflammatory mediators such as histamine and phospholipase $A_2$ from these infiltrated leukocytes, and improved pathological changes. However, anti-asthmatic activities of DBHP at oral doses of 12.5 to 50 mg/kg was less than those of dexamethasone (5 mg/kg, p.o.) and cromoglycate (10 mg/kg, p.o.), but more potent or similar to that of salbutamol (5 mg/kg, p.o.). These results in the present study suggest that anti-asthmatic effects of DBHP in the guinea pigs model of OVA-induced asthmatic responses principally are mediated by inhibiting the recruitments of the leukocytes and the release of biochemical inflammatory mediators from these infiltrated leukocytes.

Effect of MgO-P2O5 Sintering Additive on Microstructure of Sintered Hydroxyapatite (HAp) Bodies and Their In-Vitro Study

  • Lee, Byong-Taek;Youn, Hyeong-Chul;Lee, Chi-Woo;Song, Ho-Yeon
    • Korean Journal of Materials Research
    • /
    • v.17 no.2
    • /
    • pp.100-106
    • /
    • 2007
  • The effects of $MgO-P_2O_5$ based sintering additive on the microstructure and material and biological properties of hydroxyapatite $(HAp,\;Ca_{10}(PO_4)_6(OH)_2)$ ceramic were investigated using XRD, SEM and TEM techniques. The $MgO-P_2O_5$ sintering additive improved the material properties and increased the grain size in the sintered HAp bodies. As the content of sintering additive increased over 4 wt%, a small amount of the HAp phase was decomposed and transformed to ${\beta}-TCP$. In the 2 wt% $MgO-P_2O_5$ content HAp sintered body, the maximum values of density and hardness were respectively about 3.10 gm/cc and 657 HV. However, the maximum fracture toughness in the HAp body containing 8 wt% $MgO-P_{2}O_{5}$ was about $1.02MPa{\cdot}m^{1/2}$ due to the crack deflection effect. Human osteoblast like MG-63 cells and osteoclast like raw 264.7 cells were well grown and fully covered all of the HAp sintered bodies. The osteoblast cells were grown with spindle-shaped and the osteoclast cells had a grape-like round shape.

characteristics of Magnesia Dam Block for Tundish Vessel in Steel Making Process (턴디쉬용 마그네시아질 댐블록의 제조와 그특성)

  • 정두화;김상모;이석근
    • Journal of the Korean Ceramic Society
    • /
    • v.36 no.8
    • /
    • pp.876-885
    • /
    • 1999
  • In order to develop high performance basic dam block for tundish vessel in steel-making binders and additives on hydration and thermal characteristics of magnesiz castable refractories were studied. Crack initiation and propagation in cement bonded magnesia castables due to slaking of magnesia clinker at drying process were suppressed by using spinel clinker instead of magnesia powder. In case of Na2O$.$2CaO$.$P2O5(NC2P) bonded castable crack initiation due to slaking of magnesia clinker did not occur but bending strength at high temperature was low. Mechanical properties of NC2P bonded castable refractories at high temperature were improved by using magnesia clinker that contains low SiO2 contents.

  • PDF

Improved adaptive step size P&O MPPT algorithm for Solar Photovoltaic System (태양광 발전 시스템의 효율 향상을 위한 개선된 가변 스텝을 적용한 P&O MPPT 알고리즘 연구)

  • Jo, InGwon;Nam, Kwanghee
    • Proceedings of the KIPE Conference
    • /
    • 2018.11a
    • /
    • pp.143-144
    • /
    • 2018
  • 현재 친환경 신재생 에너지에 대한 관심이 점차 증가하고 있으며, 그중 태양광은 신재생 에너지 중 가장 많은 주목을 받고 있다. 본 논문에서는 태양광 발전 시스템에서 효율을 높이기 위해 최대출력 점을 찾는 MPPT 알고리즘에서 step size를 결정하는 새로운 방법을 제안한다.

  • PDF