• Economic and Environmental Geology
• /
• v.52 no.2
• /
• pp.119-128
• /
• 2019

About 300,000 tones of oyster shell are annually produced in Korea and, thus, a massive recycling plan is required. Many desulfurizing studies using oyster shells with chemical composition of $CaCO_3$ have been performed so far; however, most of them have focused on dry desulfurization. This study investigates the possibility of using oyster shells for wet desulfurization after calcination. For this, a simulated wet desulfurization facility of spray type was devised and compared the SOx-stripping characteristics of calcined oyster shell with those of limestone. The calcined oyster shell slurry indicate a better desulfurizability than the slurries of raw shell or limestone because the oyster shell transformed to a more reactive phase ($Ca(OH)_2$) by the calcination and hydration. Because of this reason, when the calcined oyster shell slurries were used, the reaction residue showed the higher gypsum ($CaSO_4{\cdot}2H_2O$) contents than any other cases. In the continuous desulfurization experiments, calcined oyster shell slurry showed a wider pH variation than limestone or raw oyster shell slurries, another clear indication of high reactivity of calcined oyster shells for $SO_2$ absorption. Our study also shows that the efficiency of wet desulfurization can be improved by the use of calcined oyster shells.

• Composites Research
• /
• v.32 no.2
• /
• pp.96-101
• /
• 2019

Interfacial adhesion between fiber and resin are related to composites performance, so it is very important to evaluate them accurately. In this study, the interfacial properties of microdroplets under fatigue loading conditions were evaluated. The mechanical properties and interfacial adhesion of epoxy resin with dopamine were studied. Tensile specimens were prepared to evaluate mechanical properties and epoxy microdroplets specimens were used for the evaluation of interfacial adhesion. In addition, in the microdroplet fatigue test, the same diameter of the microdroplet was used and the experiment was performed under the same conditions. As a result, it was confirmed that mechanical and interfacial properties were improved when dopamine was applied to epoxy resin through tensile and microdroplet experiments. It is considered that dopamine improves the degree of curing of the epoxy resin and imparts hydroxyl groups to the epoxy resin to increase the mechanical properties and the interfacial adhesion between the glass fibers.

• Journal of Biomedical Engineering Research
• /
• v.40 no.2
• /
• pp.39-47
• /
• 2019

Ultrasound sonication along with microbubble (MB) could enhance drug delivery to promote the absorption of anticancer drugs into cancers in a noninvasive and targeted manners. In this study, we verify the acute drug delivery enhancement (within an hour) of two representative focused ultrasound driven drug delivery enhancement methods (MB and Doxorubicin-coated Nanoparticle complex (MB-NP) based). Experiments were conducted using in vivo mouse model with MDA-MB-231 breast cancer cell line. Ultrasound generated by single-element 1 MHz focused ultrasound transducer was delivered in pulsed sonication consisted of 0.125 msec bursts at a pulse repetition frequency of 2 Hz for 20 seconds without a significant increase in local temperature (less than $0.1^{\circ}C$) or hemorrhage. Doxorubicin concentrations in tumors were improved by 1.97 times in the case of MB-NP, and 1.98 times by using Doxorubicin and MB separately. These results indicate anticancer drug delivery based on MB and MB-NP can significantly improve the effect of anticancer drugs delivered to tumors in a short time period by using low-intensity focused ultrasound.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.12
• /
• pp.1946-1955
• /
• 2018

Objective: This study was conducted to evaluate the effect of keratinase (KE) on the apparent ileal digestibility (AID) and standardized ileal digestibility (SID) of amino acids (AA) in rice bran, cottonseed meal (CSM), rapeseed meal (RSM), corn distillers dried grains with solubles (DDGS), and peanut meal (PNM). Methods: Twelve crossbred barrows (Duroc${\times}$Landrace${\times}$Yorkshire, $50.5{\pm}1.4kg$ body weight [BW]) fitted with T-cannulas at the terminal ileum were allotted to a $12{\times}6$ Youden Square design with 12 diets and 6 periods. The treatment diets included rice bran, CSM, RSM, corn DDGS, PNM, or corn-soybean meal (cSBM) supplemented with 0.05% KE or not. Diets were given to pigs at a level of 3% BW in two equal meals. The endogenous AA losses were the mean results of three previously experiments determined by a same nitrogen-free diet fed to pigs. Pigs had free access to water during the experiment. Results: The KE supplementation improved (p<0.05) the AID and SID of Met, Thr, Val, Asp, Cys, and Tyr in rice bran. Inclusion of KE increased (p<0.05) the AID and SID of Met and Val in CSM. The KE supplementation decreased (p<0.05) the AID and SID of His in RSM and all measured AA except for Arg, Met, Trp, Val, Gly, and Pro in corn DDGS. There was an increase (p<0.05) in AID and SID of Leu, Ile, Met, Ala, Cys, Ser, and Tyr in PNM supplemented with KE compared with that without KE. Inclusion of KE increased (p<0.05) the AID and SID of crude protein, Leu, Ile, Phe, Thr, Asp, and Ser in cSBM. Conclusion: This study indicated that KE had different effects on ileal AA digestibility of feedstuffs for growing pigs, which can give some usage directions of KE in swine feed containing those detected feedstuffs.

• Fire Science and Engineering
• /
• v.33 no.2
• /
• pp.9-19
• /
• 2019

Experiments on the combustion characteristics of untreated wood specimens and those treated with four types of silicone compounds were carried out using a cone calorimeter according to the ISO 5660-1 standard. 3-Aminopropyltrimethoxysilane (APTMS), 3-(2-aminoethylamino) propylmethyldimethoxysilane (AEAPMDMS), and 3-(2-aminoethylamino) propyltrimethoxysilane (AEAPTMS) were used as the silane compounds. The flame retardants were synthesized with sodium silicate and amino silane compounds. The measured time to ignition after combustion at an external heat flux of $50kW/m^2$ was 9 s to 11 s. Time to ignition was marked with a delayed value in the 3 s to 5 s range. The peak heat release rate ($HRR_{peak}$) was reduced by 5 to 20% compared with the uncoated specimen, and AEAPMDMS showed the highest initial fire risk. The total heat release (THR) was decreased by 1 to 22%. Compared to the untreated specimen, the fire performance index (FPI) of the specimens coated with silicone sol compounds increased by 1.5 to 2.2 fold. The fire growth index (FGI) of the AEAPMDMS specimen was increased by 30% and the others were decreased by 93 to 94%. Therefore, the fire risk of wood coated with silicone compounds was improved in terms of the heat risk properties.

• Journal of radiological science and technology
• /
• v.41 no.6
• /
• pp.587-594
• /
• 2018

The purpose of this study was to develop the indirect dosimetry by calculation (IDC) method for diagnostic X-ray equipment. The experiments were performed with inverter type X-ray tubes: Toshiba (E7252X, Japan) and Varian (RAD-14, USA). For the development method, we first applied the standard quality of X-ray beam shown in the TRS457 document, and second, to produce the constants of trendline for the IDC, the total filtration on X-ray beam was subdivided. Third, in order to increase the precision, the energy region was divided into the high energy region and the low energy region and developed by the IDC. In order to verify the IDC, mean dose (mR) values were measured for three Toshiba X-ray tubes and three Varian X-ray tubes at clinical medical institutions and then compared with the IDC on the 2013. As a result, compared with the previous study, the accuracy of the IDC of this study were improved by 2.71% and 9.91% in Toshiba and Varian X-ray tubes, respectively.

• Korean Journal of Environmental Agriculture
• /
• v.37 no.3
• /
• pp.207-212
• /
• 2018

BACKGROUND: Recently, the need for a method to cultivate 'Haryejosaeng' Satsuma mandarin has been increasing. However, there is limited information available as this is a new Satsuma mandarin cultivar, which was bred by the RDA in 2004. Many farmers who cultivate this cultivar follow the cultivation method similar to that used for 'Miyagawa' Satsuma mandarin, and suffer low production of optimum-sized fruits. METHODS AND RESULTS: This study was conducted to find out the optimum ratio of leaf-to-fruit for the stable production of high quality 'Haryejosaeng' Satsuma mandarin fruits in a non-heated plastic film house. Seven-year-old 'Haryejosaeng' Satsuma mandarin trees were used in the study. Before the treatment, the leaf-to-fruit ratio ranged from 5.7 to 17.9. The treatments included 10, 20, 30, and 40 leaves per fruit. The fruits were removed if over fruiting was observed at day 60 after full bloom. We investigated the fruit size and quality on the day of harvest. Flowering and fruiting patterns in each treatment were recorded for the following year. In the experiments, the flower-to-leaf ratio was 1.12 to 1.74. As the leaf-to-fruit ratio decreased, the fruit size and weight also decreased. Contrarily, the higher the ratio of leaf-to-fruit, the higher fruit size and weight were. It was noted that the ratio of 20:1 was ideal to produce the M grade optimum-sized Satsuma mandarin fruits on the day of harvest. However, higher ratio might result in fruits weighting above 100 g. There was no difference among the treatments in terms of fruit quality, such as total soluble solid contents, titratable acid, and color. In the subsequent years, flowering and fruiting in the treatments were lowered when the leaf number per fruit was 10, but they were improved when the leaf number per fruit was above 20. CONCLUSION: Based on the above results, the optimum ratio of leaf-to-fruit was found to be 20:1 for flowering and fruiting of 'Haryejosaeng' Satsuma mandarin. It is important that optimum ratio of leaf-to-fruit is set as a standard to produce good grade and quality of 'Haryejosaeng' Satsuma mandarin fruits.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.12
• /
• pp.935-941
• /
• 2018

In this study, we propose a suitable magnetic resonant wireless power transfer(WPT) system topology for size-limited implant medical devices(IMDs). The proposed modified series-parallel topology(mSPT) can be implemented by adding an inductor in series to the parallel-connected Rx coil and a capacitor. The topology achieves high efficiency when the Rx coil has a small inductance. The validity and operating conditions of the system are verified theoretically through circuit analysis. Experiments were conducted with bio-blocks, which are made of pork fat and muscle. When the Rx coils were inserted into the blocks at a depth of 2.5~10 mm, mSPT showed 17.79 % improved efficiency on average compared with the conventional series-series topology(SST). In the case of 32 dBm WPT in air, the Rx coil's heating rate for the mSPT was $0.18^{\circ}C/s$, whereas the SST was $0.75^{\circ}C/s$. It was confirmed that the mSPT is more suitable for an IMD-targeted WPT system.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.6
• /
• pp.581-588
• /
• 2018

The aim of this study is to propose a fine co-registration approach for multi-temporal satellite images acquired from RapidEye, which has an advantage of availability for time-series analysis. To this end, we generate multitemporal ortho-rectified images using RPCs (Rational Polynomial Coefficients) provided with RapidEye images and then perform fine co-registration between the ortho-rectified images. A DEM (Digital Elevation Model) extracted from the digital map was used to generate the ortho-rectified images, and the RNCC (Registration Noise Cross Correlation) was applied to conduct the fine co-registration. Experiments were carried out using 4 RapidEye 1B images obtained from May 2015 to November 2016 over the Yeonggwang area. All 5 bands (blue, green, red, red edge, and near-infrared) that RapidEye provided were used to carry out the fine co-registration to show their possibility of being applicable for the co-registration. Experimental results showed that all the bands of RapidEye images could be co-registered with each other and the geometric alignment between images was qualitatively/quantitatively improved. Especially, it was confirmed that stable registration results were obtained by using the red and red edge bands, irrespective of the seasonal differences in the image acquisition.

• The Korean Journal of Applied Statistics
• /
• v.32 no.2
• /
• pp.213-227
• /
• 2019

In this paper, we propose an end-to-end deep learning model combining Bayesian neural network with Korean speech recognition. In the past, Korean speech recognition was a complicated task due to the excessive parameters of many intermediate steps and needs for Korean expertise knowledge. Fortunately, Korean speech recognition becomes manageable with the aid of recent breakthroughs in "End-to-end" model. The end-to-end model decodes mel-frequency cepstral coefficients directly as text without any intermediate processes. Especially, Connectionist Temporal Classification loss and Attention based model are a kind of the end-to-end. In addition, we combine Bayesian neural network to implement the end-to-end model and obtain Monte Carlo estimates. Finally, we carry out our experiments on the "WorimalSam" online dictionary dataset. We obtain 4.58% Word Error Rate showing improved results compared to Google and Naver API.