• International Journal of Highway Engineering
• /
• v.7 no.4 s.26
• /
• pp.203-210
• /
• 2005

The penetration and viscosity tests have been used for the evaluation of the aged asphalt binder performance change. The improved test method has been required because the conventional tests could not evaluate the viscoelastic characteristics and the real behaviour of the aged asphalt binder. The conventional test methods using a different short term aged asphalt binder were tested and the test results were expressed as the penetration index and the residual penetration. The oscillatory and rotational mode tests were performed to find out the rheological characteristics of the short term aged asphalt binder in this study. The test results showed that the change of testing frequency, the speed of the vehicle effects the complex modules and phase angles. The creep compliance and shear viscosity also showed the different test results when the short term aged asphalt binders were tested. The rheological behavior should consider when the pavement design is conducted.

• KIEAE Journal
• /
• v.7 no.4
• /
• pp.147-152
• /
• 2007

Numerous non-destructive tests(NDT) to assess the safety of real structures have been developed. System identification(SI) techniques using dynamic responses and behaviors of structural systems become an outstanding issue of researchers. However the conventional SI techniques are identified to be non-practical to the complex and tall buildings, due to limitation of the availability of an accurate data that is magnitude or location of external loads. In most SI approaches, the information on input loading and output responses must be known. In many cases, measuring the input information may take most of the resources, and it is very difficult to accurately measure the input information during actual vibrations of practical importance, e.g., earthquakes, winds, micro seismic tremors, and mechanical vibration. However, the desirability and application potential of SI to real structures could be highly improved if an algorithm is available that can estimate structural parameters based on the response data alone without the input information. Thus a technique to estimate structural properties of building without input measurement data and using limited response is essential in structural health monitoring. In this study, shaking table tests on three-story plane frame steel structures were performed. Out-put only model analysis on the measured data was performed, and the dynamic properties were inverse analyzed using least square method in time domain. In results damage detection was performed in each member level, which was performed at story level in conventional SI techniques of frequency domain.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.21 no.2
• /
• pp.252-262
• /
• 2008

Purpose: This paper is aim to report that menopausal disorder can be effectively diagnosed and treated by referring to the life event stress of patient. Methods: Researchers got a grip on the life event stress of patient by using medical examinations by interview and compared the conditions of patient before and after treatment by using Kupperman's Index. The prescription of the Gamidangguisu-san hap samhap-tang( Jiaweidangguixu-san he sanhetang) and the Gamisoyo-san (Jiaweixiaoyao-san) and the acupuncture therapy and the moxibustion therapy were used for the treatment. Results: The serious musculoskeletal systemic pains, which includes back pain, lumbago, and myalgia, and other menopausal troubles were improved remarkably. Conclusion: The menopausal disorder could be caused by not only the change of hormone but also complex factors of environmental matters which includes social cultural surroundings, mentality etc. Therefore the life event stress could be one of critical factors of menopausal disorder. The diagnosis and treatment considering the life event stress could be effective method to relieve patient's menopausal disorder.

• Journal of the Korea Computer Graphics Society
• /
• v.23 no.5
• /
• pp.67-73
• /
• 2017

We propose several techniques which can be employed in a 3D fitness program for monitoring and correcting user's posture. To implement a 3D fitness program, improved reference motion generating techniques and visualizing techniques are necessary. First, in order to understand the difference between the user and the reference movement of a professional, a retargeting method between two different body shapes are studied. Second, the problem of self-occlusion, which occurs when using a low-cost depth sensor to represent complex motions, is solved by using a sample database and time consistency. The system proposed in this paper evaluates the user's posture considering the physical characteristics of the user, and then provides feedback to the user.

• Fire Science and Engineering
• /
• v.29 no.6
• /
• pp.65-70
• /
• 2015

This research examines the removal efficiency of benzene, toluene, xylene (BTX) and total volatile organic compounds (TVOCs) by flowing VOCs, which are generated at a petrochemical complex in the Ulsan area, in a sliding arc plasma (SAP) reactor. The SAP reactor process is composed of 5 steps and the analysis was conducted using a BTX detector and TVOC measuring instrument. The removal efficiency of BTX was better at high concentration than at low concentration and the emitted TVOC concentration increased in later steps of the reactor. In addition, the removal efficiency improved, as the flow velocity increased. The maximum permissible concentration of TVOCs in the first step was about 481 ppm and showed over 94.83% efficiency when it was operated in the 2nd step at concentrations beyond 481 ppm. Therefore, there are many factors for improving the removal efficiency of SAP reactors at low concentration and measures should be prepared according to the application method for the various types of industrial reactors.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.5
• /
• pp.29-39
• /
• 2012

The main objective is to predict the future degradation and maintenance budget for a suspension bridge system. Bayesian inference is applied to find the posterior probability density function of the source parameters (damage indices and serviceability), given ten years of maintenance data. The posterior distribution of the parameters is sampled using a Markov chain Monte Carlo method. The simulated risk prediction for decreased serviceability conditions are posterior distributions based on prior distribution and likelihood of data updated from annual maintenance tasks. Compared with conventional linear prediction model, the proposed quadratic model provides highly improved convergence and closeness to measured data in terms of serviceability, risky factors, and maintenance budget for bridge components, which allows forecasting a future performance and financial management of complex infrastructures based on the proposed quadratic stochastic regression model.

• Journal of the Institute of Convergence Signal Processing
• /
• v.14 no.4
• /
• pp.235-242
• /
• 2013

In this paper, the system which can translate sign language through motion recognition of Kinect camera system is developed for the communication between hearing-impaired person or language disability, and normal person. The proposed algorithm which can translate sign language is developed by using core function of Kinect, and two ways such as length normalization and elbow normalization are introduced to improve accuracy of translating sign langauge for various sign language users. After that the sign language data is compared by chart in order to know how effective these ways of normalization. The accuracy of this program is demonstrated by entering 10 databases and translating sign languages ranging from simple signs to complex signs. In addition, the reliability of translating sign language is improved by applying this program to people who have various body shapes and fixing measure errors in body shapes.

• Genomics & Informatics
• /
• v.7 no.2
• /
• pp.122-130
• /
• 2009

A systems biology approach for the identification of perturbed molecular functions is required to understand the complex progressive disease such as breast cancer. In this study, we analyze the microarray data with Gene Ontology terms of molecular functions to select perturbed molecular functional modules in breast cancer tissues based on the definition of Gene ontology Functional Code. The Gene Ontology is three structured vocabularies describing genes and its products in terms of their associated biological processes, cellular components and molecular functions. The Gene Ontology is hierarchically classified as a directed acyclic graph. However, it is difficult to visualize Gene Ontology as a directed tree since a Gene Ontology term may have more than one parent by providing multiple paths from the root. Therefore, we applied the definition of Gene Ontology codes by defining one or more GO code(s) to each GO term to visualize the hierarchical classification of GO terms as a network. The selected molecular functions could be considered as perturbed molecular functional modules that putatively contributes to the progression of disease. We evaluated the method by analyzing microarray dataset of breast cancer tissues; i.e., normal and invasive breast cancer tissues. Based on the integration approach, we selected several interesting perturbed molecular functions that are implicated in the progression of breast cancers. Moreover, these selected molecular functions include several known breast cancer-related genes. It is concluded from this study that the present strategy is capable of selecting perturbed molecular functions that putatively play roles in the progression of diseases and provides an improved interpretability of GO terms based on the definition of Gene Ontology codes.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.3
• /
• pp.131-136
• /
• 2007

This paper proposes a new approach to eliminate the reflectance component for the detection of text in color images. Color images, printed by color printing technology, normally have an illumination component as well as a reflectance component. It is well known that a reflectance component usually obstructs the task of detecting and recognizing objects like texts in the scene, since it blurs out an overall image. We have developed an approach that efficiently removes reflectance components while preserving illumination components. We decided whether an input image hits Normal or Polarized for determining the light environment, using the histogram which consisted of a red component. We were able to go ahead through the ability to extract by reducing the blur phenomenon of text by light because reflection component by an illumination change and removed it and extracted text. The experimental results have shown a superior performance even when an image has a complex background. Text detection and recognition performance is influenced by changing the illumination condition. Our method is robust to the images with different illumination conditions.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.38 no.3
• /
• pp.78-86
• /
• 2015

Up-to-date business environment for manufacturers is very complex and rapidly changing. In other words, companies are facing a variety of changes, such as diversifying customer requirements, shortening product life cycles, and switching to small quantity batch production. In this situation, the companies are introducing the concept of JIT (just-in-time) to solve the problem of on-time production and on-time delivery for survival. Though many companies have introduced ERP (enterprise resource planning) systems and MRP (material requirement planning) systems, the performance of these systems seems to fall short of expectations. In this paper, the case study on introducing an APS (advanced planning and scheduling) system based on dispatching rules to a machining company and on finding a method to establish an efficient production schedule is presented. The case company has trouble creating an effective production plan and schedule, even though it is equipped with an MRP-based ERP system. The APS system is applied to CNC (computer numerical control) machines, which are key machines of the case company. The overall progress of this research is as follows. First, we collect and analyze the master data on individual products and processes of the case company in order to build a production scheduling model. Second, we perform a pre-allocation simulation based on dispatching rules in order to calculate the priority of each order. Third, we perform a set of production simulations applying the priority value in order to evaluate production lead time and tardiness of pre-defined dispatching rules. Finally, we select the optimal dispatching rule suitable for work situation of the case company. As a result, an improved production schedule leads to an increase in production and reduced production lead time.