• Journal of The Korean Society of Grassland and Forage Science
• /
• v.18 no.1
• /
• pp.55-60
• /
• 1998

This study was conducted to investigate the effects of the pasture types and the leveling methods of winding slope land for seedbed on the runoff, soil loss, botanical composition, dry matter yield of forage and economical value at the Experimental Field of Grassland and Forage Crops Division, National Livestock Research Institute, Suweon, from 1994 to 1995. The results obtained are summarized as follows: 1. Runoff of the improved land was higher than that of the unimproved land in the top grass and bottom grass. 2. Soil loss of the improved land was higher than that of the unimproved land in the top and bottom grasses in the first year. However, it was slightly higher in the unimproved land, and all of it were greatly decreased in the second year. 3. The percentage of grasses coverage was increased with the improved land in the first year, and it was not different between the improved land and unimproved land in the second year. Also, it was slightly increased in the bottom grasses. 4. Dry matter yield of grasses was increased with improved land at the top and bottom grasses. DM yield of grasses was increased in the top grasses in the first year and bottom grasses in the second year, respectively. 5. The establishment cost of grasses was decreased with wages decrement, and the management cost was saved about 1,116,000 won per ha with improved land. The results demonstrated that although soil loss was increased by leveling methods of improved land irrespective of pasture types in the first year, it was decreased with time little by little. Also, improved land was very good for grasses coverage, dry matter(DM) yield and economical value.

• Journal of the Korean Society of Radiology
• /
• v.17 no.1
• /
• pp.115-122
• /
• 2023

The hip joint device is an important immobilization device for internal rotation in the diagnosis of bone density test, microfracture, and arthritis. These fixing mechanisms have limitations in maintaining reproducibility due to the use of Velcro. In this study, we developed an improved hip joint device and evaluated its usefulness. For 30 students enrolled in the Department of Radiology, we evaluated the reproducibility through medical imaging and the time required for positioning by applying the conventionaling and improved device. Changes over time were also evaluated. As a result, compared to the conventional device, the improved device showed a 32% reduction in positioning time and improved reproducibility by about 6.2 times. As for the amount of change over time, the positioning time increased in the conventional device, but decreased in the improved device, and the reproducibility of the conventional device was lower than that of the improved device. Through this, it can be said that the use of the improved device improved the image quality and reduced the radiologist's workload.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06c
• /
• pp.213-216
• /
• 1998

This paper proposes improved algorithm for multi-user detection in DS-CDMA. Each of algorithm is based on CMA algorithm. Improved LMS-CMS and LMAD-CMA are combined to macthed filter. Simulations results shown that Improved LMAD-CMA algorithm has a higher capacity than MOE in steady-state convergence properties.

• Geomechanics and Engineering
• /
• v.7 no.5
• /
• pp.539-552
• /
• 2014

A simplified probability-based design charts for stone column-improved ground have been presented based on the unit cell approach. The undrained cohesion ($c_u$) and coefficient of radial consolidation ($c_r$) of the soft soil are taken as the most predominant random variables. The design charts are developed to estimate the diameter of the stone column or the spacing between the stone columns by employing a factored design value of $c_r$ and $c_u$ so as to satisfy a specific probability level of the target degree of consolidation and/or a target safe load that needs to be achieved in a specified timeframe. The design charts can be used by the practicing engineers to design the stone column-improved ground by considering consolidation and /or bearing capacity of the improved ground.

• Nuclear Engineering and Technology
• /
• v.28 no.4
• /
• pp.423-430
• /
• 1996

The improved and advanced Annulus Gas System(AGS) has been developed for Wolsong 2 to satisfy the requirements of the regulatory body. The Atomic Energy Control Board(AECB) required a shorter detection time following a small leak from a pressure tube and/or calandria tube. This paper describes licensing requirements, functional requirements and detail design description for the AGS. The Wolsong unit No. 1 AGS was designed to operate as a stagnant system normally requiring only pressure regulation and having provisions for purging. no improved AGS involves the adoption of gas recirculation in AGS, duplication of dew point indicators with additional instrumentation and sampling provisions to prompt operator action. The improved system operates in the recirculation mode with continuous dew point measurement for leak detection. An AGS with improved detection instrumentation is provided.

• Structural Monitoring and Maintenance
• /
• v.5 no.2
• /
• pp.261-272
• /
• 2018

The commonly used TMD design method in the project assumes the TMD has pure linearity. However, in real engineering TMD will exhibit nonlinear behaviors. Without considering the nonlinearity of TMD, the control effect of the TMD that is designed by the linear design method, may be worse and even enlarge the structural response. In this paper, based on the previous study results of nonlinear TMD, the improved design method for engineering application is proposed. The linear design method and the improved design method are compared. Taking the best parameter obtained by the improved design method is less than or equal to 90% of that obtained by the original design method as the dividing line. The critical nonlinear coefficient, reaching which value the improved design method needs to be used, is given. Finally, numerical simulations on two engineering examples are conducted to proof the results.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.22 no.4
• /
• pp.399-404
• /
• 2012

Evolutionary algorithms such as genetic algorithm (GA) have been proven their effectiveness when applying to the design of fuzzy models. However, it tends to suffer from computationally expensWive due to the slow convergence speed. In this study, we propose an approach to develop fuzzy models by means of an improved differential evolution (IDE) to overcome this limitation. The improved differential evolution (IDE) is realized by means of an orthogonal approach and differential evolution. With the invoking orthogonal method, the IDE can search the solution space more efficiently. In the design of fuzzy models, we concern two mechanisms, namely structure identification and parameter estimation. The structure identification is supported by the IDE and C-Means while the parameter estimation is realized via IDE and a standard least square error method. Experimental studies demonstrate that the proposed model leads to improved performance. The proposed model is also contrasted with the quality of some fuzzy models already reported in the literature.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1997.10a
• /
• pp.51-56
• /
• 1997

This study is aimed for investigating the influence of mortar on improved of surface shape of crushed sand, and analyzing the physical properties of fresh state and hardened state. By the test results, it was found that the flow value and bleeding ratio was increased, but the change of flow value according to time was decreased with the improved surface shape of crushed sand. Also, comparing improved of surface shape of crushed sand with not improved of surface shape of crushed sand on strength, compressive strength is about the same and flexural strength decrease in case of improved of surface shape of crushed sand.

• Proceedings of the KIPE Conference
• /
• 1998.07a
• /
• pp.249-254
• /
• 1998

A control approach for the robust position control of induction motors based on the improved binary disturbance observer is described. The conventional binary disturbance observer is used to remove the chattering problem of a sliding mode disturbance observer. However, the steady state error may be existed in the conventional binary disturbance observer because it estimates external disturbance with a constant boundary layer. In order to overcome this problem, a new binary disturbance observer with an integral augmented switching hyperplane is improved. The robustness is achieved, and the continuous control is realised by employing the improved observer without the chattering problem and the steady state error. The effectiveness of the improved observer is confirmed by the comparative experimental results.

• Journal of Microbiology and Biotechnology
• /
• v.3 no.4
• /
• pp.270-276
• /
• 1993

We characterized the character impact compounds of flavors of the fermented Korean soy sauce manufactured with both the traditional and the improved Meju made with different strains. The whole flavor samples were obtained by extracting each volatile flavor phase from both the traditional and the improved soy sauce. To get more detailed information, each whole volatile flavor was further fractionated into the basic, acidic, phenolic and neutral fractions. Each separated peak from the whole and fractionated flavor samples on gas chromatogram was identified by GC/MS and Kovat s retention index, and likewise the aroma of each peak was investigated by a sniffing test with the exercised panel. We were able to identify 15 groups of ingredients with the characteristic soy sauce aroma from the soy sauce made with the traditional Meju and 6 groups from the soy sauce manufactured with the improved Meju made with Aspergillus oryzae. The character impact compounds the two soy sauces were different from each other.