• 대한전기학회논문지:전력기술부문A
• /
• 제51권6호
• /
• pp.302-310
• /
• 2002

This paper presents an application of a improved branch exchange (IBE) algorithm with a tie branch power (TBP) flow equation to solve the Optimal Routing problem for operation of a radial Power system including power distribution system. The main objective of the Optimal Routing problem usually is to minimize the network real power loss and to improve the voltage profile in the network. The new BE algorithm adopts newly designed methods which are composed by decision method of maximum loss reduction and new index of loss exchange in loop network Thus, the proposed algorithm in this paper can search the optimal topological structures of distribution feeders by changing the open/closed states of the sectionalizing and tie switches. The proposed algorithm has been evaluated with the practical IEEE 32, 69 bus test systems and KEPCO 148 bus test system to show favorable performance gained.

• 대한안전경영과학회지
• /
• 제9권1호
• /
• pp.1-8
• /
• 2007

To improve the practical application of the thermal expansion of closed long pipeline exposing to external heating sources such as solar energy, safety engineering and system optimization for relief valve in the closed piping system are suggested through theoretical approach, correlation in view of temperature and pressure increase caused by external solar energy in the closed piping system. The profile for thermal relief valve including relieving capacity, influx heat energy, sizing criteria, set pressure, selection against back pressure is also presented. It is noted that following topic on solar relief valve should be applied to engineering, installation and commissioning.

• Journal of Power Electronics
• /
• 제18권1호
• /
• pp.251-265
• /
• 2018

To enable a master-slave control independent microgrid system (MSCIMGS) to supply electricity continuously, the microgrid inverter should perform mode transfer between grid-connected and islanding operations. Transient oscillations should be reduced during transfer to effectively conduct a seamless mode transfer. This study uses a typical MSCIMGS as an example and improves the mode transfer strategy in three aspects: (1) adopts a status-tracking algorithm to improve the switching strategy of the outer loop, (2) uses the voltage magnitude and phase pre-synchronization algorithm to reduce transient shock at the time of grid connection, and (3) applies the hybrid-sensitivity $H_{\infty}$ robust controller instead of the current inner loop to improve the robustness of the controller. Simulations and experiments show that the proposed strategy is more practical than the traditional proportional-derivative control mode transfer and effective in reducing voltage and current oscillations during the transfer period.

• 수산해양기술연구
• /
• 제57권4호
• /
• pp.401-409
• /
• 2021

In this study, an improvement plan was derived by statistically analyzing the system and current status of tests in Korea and survey of seafarers perception in order to improve the expertise of the Korean fishing vessel officer examination. Recently, about 70% of marine accident occurs from fishing vessels. Therefore, it's necessary to improve the examination to reduce marine accidents. As a result, it was identified that an average of 29,265 applicants have applied over the past four years, and among them, 1,833 people have applied for fishing vessel licenses, accounting for 6.3% of the total. According to the result of explanation and response of 115 people, they responded that practical utilization was low, each operation waters has different requirements and it's necessary to improve the contents of the questions for the specialty subject. In addition, inappropriate questions were found in previous exams. To reduce marine accidents caused by human error and to improve the professionalism of fishing vessel officers, it is necessary to adjust the test criteria and ratio with characteristics of fishing vessels and in the long run, institutional improvements such as the distinction between test subjects and licenses are needed.

• 대한임상검사과학회지
• /
• 제49권3호
• /
• pp.300-307
• /
• 2017

뇌파검사는 영상검사와는 달리 기능검사로 간질을 진단하고 뇌와 관련된 질환들의 진단에 도움이 된다. 뇌파검사를 시행하는 임상병리사의 가장 중요한 점은 정확한 전극 부착 위치를 확인하여 전극을 부착하고 인공산물을 제외한 순수한 뇌파를 기록하는 것에 있다. 이를 위하여 교과과정에서 이론적인 부분과 함께 실습을 포함시키고 있다. 그러나 고가의 장비와 실습시간의 부족 때문에 충분한 실습을 할 수 없는 실정이다. 본 연구에서는 위에 언급된 사항을 해결하고자 연습용 10-20 Electrode system을 제작하여 설문지를 통해 만족도와 실용성을 확인하고자 한다. 연습용 10-20 Electrode system을 사용한 실습시간은 $43.58{\pm}9.647$분으로 측정되어 효율성을 확인하였다. 또한 교과과정 중 뇌파검사 실습을 진행한 학생(유경험자)의 만족도는 $7.21{\pm}2.285$점, 연습용 10-20 Electrode system을 사용한 실습 만족도는 $9.46{\pm}1.166$점으로 상당 부분 향상되었다. 세부적으로 보면 유경험자는 교과과정 중 실습할 때 전극 부착 위치만 확인하고, 전극은 단체로 붙여보는 실습을 했고. 애로사항 중 전극 부착위치가 찾기 어려움이 가장 높게 나타났다. 무경험자는 교과과정 중 뇌파 장비의 부재로 인해 실습을 하지 못했다. 연습용 10-20 Electrode system을 사용하여 실습했을 때는 전극 부착위치를 찾는 것과 전극(풀)을 부착하는 어려움이 교과과정 중 실습할 때와 마찬가지로 가장 많이 아쉬움으로 나타났다. 위에 언급된 내용을 보면 연습용 10-20 Electrode system을 사용하여 실습을 하게 되면 부족한 장비와 실습시간으로 인한 문제점을 해결 가능할 것이라고 사료된다. 그러나 연습용 10-20 Electrode system의 실제 뇌파 확인, 정확한 부착위치 확인 등 한계점을 개선하여 좀 더 실현성 있는 실습도구가 되도록 연구가 필요하고 더 나아가 다른 분야도 마찬가지로 고가의 장비로 인해 어려운 부분을 해결할 수 있을 것이라 기대한다.

• 소성∙가공
• /
• 제8권1호
• /
• pp.29-37
• /
• 1999

An analysis system for sheet metal forming(SAT_STAMP) has been developed to improve the design and tryout process by predicting the deformation behavior more precisely. This analysis system consists of forming analysis, springback analysis and post processor modules. The more accurate prediction of stress history can be achieved due to the improved contact algorithm. Continuous simulation of sequential processes can be carried out conveniently without interruption by the improved data management of the developed system. The error of data transfer between forming analysis and springback analysis is minimized using the proper shell element. Several benchmark test results and practical results are presented to show the effectiveness and reliability of this program.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2009년 춘계학술발표대회 논문집
• /
• pp.236-239
• /
• 2009

Since 1990s, we have achieved a certain level of success in standardization of design, construction, and material on housing and public buildings with the national-level promotion. A practical connecting device that can synthesize all the serial processes is required to maximize the effect of construction material standardization. However, desired outcome of the standardization is not achieved yet because these serial standards and notification practices are decided by each part of the process and some are congested. In this study, we aim to improve a general organizational system of Korean Industrial Standard (KS) which is the most fundamental tool for the standardization of construction materials moving from a conventional idea that the standard is only for the material and components producers to a concept that can also be shared by the designers and construction workers. To achieve this, we propose an improvement plan for the Korean Industrial Standard in the perspective of three-tier classification system.

• 한국주거학회논문집
• /
• 제20권3호
• /
• pp.59-67
• /
• 2009

Since 1990s, we have achieved a certain level of success in standardization of design, construction, and material on housing and public buildings with the national-level promotion. A practical connecting device that can synthesize all the serial processes is required to maximize the effect of construction material standardization. However, desired outcome of the standardization is not achieved yet because these serial standards and notification practices are decided by each part of the process and some are congested. In this study, we aim to improve a general organizational system of Korean Industrial Standard (KS) which is the most fundamental tool for the standardization of construction materials moving from a conventional idea that the standard is only for the material and components producers to a concept that can also be shared by the designers and construction workers. To achieve this, we propose an improvement plan for the Korean Industrial Standard in the perspective of three-tier classification system.

• 디지털산업정보학회논문지
• /
• 제8권4호
• /
• pp.19-24
• /
• 2012

Recently, universities have difficulties in operating the normal curriculum because fresher's basic academic ability is declined. It causes campus misfits so managing students become a rising issue. The education system that focuses only on college entrance exam is one of the reasons why this phenomenon occurred. So, several tries are enacted at university to improve this problem. One of the solutions is enforcing the activity with self-directed Learning Community students to know learning level themselves and execute systematic studying habit is essential for improving this problem. This activity can help students understanding and having interest in class and be motivated to study. But it had burdened tutors with submitting activity report in written form. In this paper, we suggest the Mobile Based Activity Report Submission System which can be the solution of the problem that the Self-directed Learning Community System has. This system reduces the emotional burden to write the reports and manages them efficiently.

• 융합신호처리학회논문지
• /
• 제11권3호
• /
• pp.221-225
• /
• 2010

This paper presents the preliminary study of an interactive rehabilitation support system for both dementia patients and their caregivers, the goal of which is to improve the quality of life(QOL) of the patients suffering from dementia through virtual interaction. To achieve the virtual interaction, three kinds of recognition modules for speech, facial image and pen-mouse gesture are studied. The results of both practical tests and questionnaire surveys show that the proposed system had to be further improved, especially in both speech recognition and user interface for real-world applications. The surveys also revealed that the pen-mouse gesture recognition, as one of possible interactive aids, show us a probability to support weakness of speech recognition.