• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.361-362
• /
• 2006

This paper presents the robust design of gripper part for a high-speed LCD (Liquid Crystal Display) transfer system. In this paper, the 1st DOE (Design of Experiment) is conducted to find out main-effect factors fur the design of gripper part. Thirty-six experiments are performed using $ANSYS^{(R)}$ and their results are statistically analyzed using $MINITAB^{(R)}$, which shows that the factors, i.e., First-width, Second-width, Rec-width, and thickness of gripper part, are more important than other factors. The main effect plots shows that the maximum deflection and mass of gripper part are minimized by increasing First-width, Second-width, Rec-width and thickness. The 2nd DOE is conducted to obtain RSM (Response Surface Method) equation. The CCD (Central Composite Design) technique with four factors is used. Optimum design is conducted using the RSM equation. Genetic algorithm is used for optimal design. Six sigma robust design is conducted to find out a guideline for control range of design parameter. To obtain six sigma level reliability, the standard deviations of design parameters are shown to be controlled within 5% of average design value.

• Journal of Construction Engineering and Project Management
• /
• v.10 no.1
• /
• pp.16-32
• /
• 2020

Cost and time control of projects is important in preventing project failure. However, achieving effective cost and time control in practice is often challenging. The challenges of project cost and time control in practice are investigated by carrying out a questionnaire survey on the top 150 construction contractors in the UK followed by in-depth semi-structured interviews of practitioners from 15 construction companies in the country. Quantitative analysis reveals that design change is the most important factor inhibiting the ability of UK contractors from effectively controlling both the cost and time of construction projects. Four of the top five factors inhibiting effective cost control are also the top factors inhibiting effective time control albeit in a different order. These top factors-design changes, inaccurate evaluation of project time/duration, risk and uncertainty, non-performance of subcontractors and nominated suppliers were also found to be endogenous factors to the project. Additionally, qualitative analysis of the interviews reveals 16 key challenges to prevent for effective project cost and time control in practice. These are classified into four categorised based on where they stem from as follows; from the organisation (1. Lack of integration of cost and time during project control, 2. lack of management buy-in, 3. complicated project control systems and processes, 4. lack of a project control training regime); from the construction management/project management approach (5. Lapses in integration of interfaces, 6. project control not being implemented from the early stages of a project, 7. inefficient utilisation and control of labour, 8. limited time devoted to planning how a project will be controlled at the outset); from the client; (9. Excessive authorisation gates, 10. use of adversarial and non-collaborative forms of contracts, 11. communication problems within client set-up, 12. obstructive client representatives) and; from the project team (13. Lack of detailed/complete design, 14. lack of trust among the project partners, 15. limited time devoted to project control on site, 16. non-factual reporting). The study posits that knowledge of these project control inhibiting factors and challenges is the first step at ensuring they are avoided and enable the implementation of a more effective project cost and time control process in practice.

• Journal of Construction Engineering and Project Management
• /
• v.6 no.4
• /
• pp.7-14
• /
• 2016

While the idea of the existence of a set of key factors for success in planning, designing and construction of projects is not new, it remains one of the most important issues in the field of construction management. This is due to project success factors are inputs to project management practice which can lead directly or indirectly to project success. This study identifies the success factors which can be used for improving the highway projects performance in Egypt during the project pre-construction and construction phases. Through a detailed literature review 35 success factors are identified. Furthermore, the AHP is adopted to prioritize the studied factors through the application of questionnaire survey. The study establishes that implementing an effective quality control and assurance systems, allow sufficient time for feasibility studies, design, drawing and tender preparation, effective cost control system and frequency of project budget updates, preparing adequate designs and drawings and determining sufficient time to implement the desired scope of work are the most important success factors for enhancing the highway projects performance in Egypt.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.654-656
• /
• 2002

The pole shape. turn-on angle. and turn-off angle are important design factors that largely influence Switched Reluctance Motor' s performance when designing a switched reluctance motor. These design factors must be considered simultaneously because an independent factor restricts the improvement of the switched reluctance motor' s performance. After performing the analysis using nonlinear same characteristic finite element method that contains a operating circuit, the influence upon the torque characteristics was analyzed by the pole shape and the angles. This paper presents the most suitable design value according to input conditions and various speeds. Especially.the most suitable angles were derived from the voltage equation. and an effective design range is showed from the angles.

• Journal of the Ergonomics Society of Korea
• /
• v.26 no.1
• /
• pp.63-69
• /
• 2007

One of the most important aspects to succeed in character industry is to develop a character that it can sensibly satisfy customers. For this, sensibility evaluation has to be carried character design have to be analyzed, firstly. In this study, sensibility evaluation using multi-variate analysis was performed for some humanized characters. From the factor analysis, sensibility factors were extracted and sensibility characteristics for characters were analyzed by those factors. Preference for those characters was evaluated and was analyzed in relation to those sensibility characteristics. Finally, a direction of character design was proposed from those results.

• Journal of the Korean Society of Systems Engineering
• /
• v.6 no.1
• /
• pp.47-52
• /
• 2010

Human Factors Engineering (HFE) for Main Control Room (MCR) of Nuclear Power Plant (NPP) has been applied to optimize the design and operation of Man-Machine Interface (MMI) between operators and their equipment in consideration of physical, psychological and cognitive aspects. However, it has been observed that operators complain about environmental discomfort in the MCR since the operators in the MCR experience excessive stress due to the environmental factors such as inappropriate interior and lighting system. Since the HFE is an essential factor for the high fidelity performance of operators in the MCR, the adequate MCR environment design with HFE rules and guidelines is as much important to enhance the operability and reliability of the MCRs. Therefore, there has been a strong need to design a pleasant environment for the MCR to improve human performance of the operators.

• Geomechanics and Engineering
• /
• v.22 no.5
• /
• pp.433-439
• /
• 2020

Tunnels are one of the most important constructions in civil engineering. The damage to these structures caused enormous costs. Therefore, the safe and economic design of these structures has long been considered. However, both applied loads on the tunnels as well as the resistance of the structural members are naturally uncertain parameters, hence, the design of these structures requires considering the probabilistic approaches. This study aims to determine the load and resistant factors of lining tunnels concerning the earthquake extreme events limit state function. For this purpose, tunnels that have been designed according to the previous design codes (AASHTO Tunnel LRFD 2017) and using reliability analysis, the optimum reliability of these structures for different loading scenarios is determined. In this paper, the tunnel is considered circular. Finally, the proper load and resistance factors are calculated corresponding to the obtained target reliability. Based on the performed calibration earthquake extreme events limit state function, the result of this study can be recommended to AASHTO Tunnel LRFD 2017.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.17 no.2
• /
• pp.145-154
• /
• 2015

This study aims to identify the differences of body image when the stripe direction and width change of semi-tight skirt. The semi-tight skirt pattern was made using the standard size of a women in their 20s. 12 semi-tight skirt models combining 6 kinds of stripe directions and 2 kinds of stripe widths were made using CLO 3D virtual clothing system. The data was evaluated by 126 fashion design majors. The results were as follows; In accordance with the body image factor analysis of semi-tight skirt, three image factors were identified; whole body optical illusion, calf optical illusion and hip optical illusion. Among these factors, the whole body optical illusion factor is the most important factor. The body image depending on the stripe direction and width change of semi-tight skirt mostly showed the significant difference. In accordance with the analysis on the interaction effect of body image depending on the stripe direction and width change of semi-tight skirt, the whole body, calf and hip optical illusion factors showed the significance. The interaction of body image had independent influence on all factors of stripe direction and width. In particular, the interaction of stripe direction and width had the most significant influence on the whole body optical illusion.

• Journal of the Semiconductor & Display Technology
• /
• v.15 no.4
• /
• pp.86-91
• /
• 2016

End milling is an important and common machining operation because of its versatility and capability to produce various profiles and curved surfaces. This paper presents an experimental study of the cutting force variations in the end milling of SM25C with HSS(high speed steel) and carbide tool. This paper involves a study of the Taguchi design application to optimize cutting force in a end milling operation. The Taguchi design is an efficient and effective experimental method in which a response variable can be optimized, given various control and noise factors, using fewer resources than a factorial design. This study included feed rate, spindle speed and depth of cut as control factors, and the noise factors were different cutting tool in the same specification. An orthogonal array of $L_9(3^3)$ of ANOVA analyses were carried out to identify the significant factors affecting cutting force, and the optimal cutting combination was determined by seeking the best cutting force and signal-to-noise ratio. Finally, confirmation tests verified that the Taguchi design was successful in optimizing end milling parameters for cutting force.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.1
• /
• pp.283-289
• /
• 2015

This study examines what information is that affects factors of purchase from product detail page of internet shopping malls. For this purpose, the first, the classification of Internet shopping malls and product information and purchasing factors were determined through previous studies, the second, by constructing a questionnaire based on this, verify the validity of each factor and, the finally, the biggest influence what information was performed to examine. What consumers really wants the information, what information to make purchases, the Internet shopping site will be to assist in the design. The results using the Internet shopping site that users reviews, site reliability, Information Architecture, reserve, 3D images and product images available, has been identified as factors affecting the use of reviews and product images available on the factors affecting the revealed. In the site design layout, color systems, text and many design factors are important, but will have to be designed to be purchased by providing sufficient information for the product.