• Journal of Applied Reliability
• /
• v.10 no.1
• /
• pp.39-56
• /
• 2010

Statistical process control (SPC) is a powerful technique for monitoring, managing, analysing and improving the process performance. However, its has limitations such as lack of engineering, statistical skill and training, and lesser importance of activity. To solve the problems, this study proposes an intelligent SPC system using specified agents which are derived through analysis and evaluation of the SPC activities. The activities investigated by the relevant researches are categorized as collection, process analysis, diagnosis, detection, cause analysis and rule generation. Also, the evaluation criteria are established as feasibility of automation, frequency, level and time. The requirements of the agent functions are derived by the evaluation, and the types of customized agents are as data collection, store, analysis, diagnosis, monitoring, alarm and reporting. A prototype SPC system represents that the functions of the proposed agents are successfully validated.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.44 no.6
• /
• pp.10-18
• /
• 2007

In consideration of increment and importance for data, an efficient and large storage backup system requires. Existing backup system solutions show some limitations in speed and technical. In order to solve these deficiencies, backup and recovery system of high efficiency and large storage capacity was designed and implemented by using high speed, compression technique and backup accelerator etc. Backup and recovery system applies to multi-threading, multi-processing and multi-streaming technology. And already established systems based on tape, but proposed backup operating model designed on disk. Therefore, the implemented of system leads to these backup media problems as well as solutions to aforementioned issues with existing backup system.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2004.10a
• /
• pp.355-362
• /
• 2004

An efficient boundary-based technique is developed for addressing shape design sensitivity analysis in various problems. An analytical sensitivity formula in the form of a boundary integral is derived based on the continuum formulation for a general functional defined in problems. The formula, which is expressed in terms of the boundary solutions and shape variation vectors, can be conveniently used for gradient computation in a variety of shape design problems. While the sensitivity can be calculated independent of the analysis means, such as the finite element method (FEM) or the boundary element method (BEM), the FEM is used for the analysis in this study because of its popularity and easy-to-use features. The advantage of using a boundary-based method is that the shape variation vectors are needed only on the boundary, not over the whole domain. The boundary shape variation vectors are conveniently computed by using finite perturbations of the shape geometry instead of complex analytical differentiation of the geometry functions. The supercavitating flow problem and fillet problem are chosen to illustrate the efficiency of the proposed methodology. Implementation issues for the sensitivity analysis and optimization procedure are also addressed in these problems.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.5 no.6
• /
• pp.631-636
• /
• 2010

The network configuration of SMS number moving service is a very important factor to improve the user convenience to Internet Telephone. To provide the service, The SMSC system is required the the function of DB process and management of the subscriber, In case of SMSG system to interconnects with the other network and SMSC, the function of the call processing of subscriber who has changed his number by interconnecting with NPDB(Number Portability DB) is required. This paper had studied the way to consist the efficient network by the number moving technique.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.4
• /
• pp.569-574
• /
• 2017

In order to transmit information in a channel environment in which noise exists, a coding technique of information is required. One of the coding techniques used for error detection and correction close to the Shannon limit is Low Density Parity Code(LDPC). LDPC and decoding characteristic features by Sum-product algorithm are matched for the performance to Turbo Code, RA(Repeat Accumulate) code, in case of very long code length of LDPC surpass their performance. This paper explains LDPC coding scheme of image data and decoding scheme, implements LDPC decoder in FPGA.

• Journal of Ocean Engineering and Technology
• /
• v.32 no.1
• /
• pp.68-75
• /
• 2018

This study deals with the heading angle and depth keeping control technique for an ROV with multiple horizontal and vertical thrusters by thrust allocation. The light work class ROV URI-L, which is under development at KRISO, is a redundant actuating system with multiple thrusters that are larger than the ROV's degree of freedom. In the redundant actuating system, there are several solutions for a specific ROV motion to be performed. Therefore, a thrust allocation algorithm that considers the entire propulsion system should be regarded as important. First, this paper describes the propulsion system of the ROV and introduces the thrust allocation method of each motion controller. In addition, the performance of the controller is examined using a heading angle and depth keeping control test in a stationary state.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.183-186
• /
• 2010

This paper presents a stable real-time based FlexRay technology which is employed with a standard protocol of the marine electronic equipments and the bridge navigational watch alarm system (BNWAS). The traditional marine communications use NMEA communication protocols, and RS-232 and RS-422 techniques in the BNWAS, thus there are difficulty in seeking stability and reliability. To overcome such problems we utilize the FlexRay protocol technique to prevent data loss or error.

• The Journal of Korean Association of Computer Education
• /
• v.5 no.4
• /
• pp.71-78
• /
• 2002

The mobile agent is receiving the attention as new technique to retrieve and to share the distributed contents on web-based educational systems. The retrieval using mobile agent uses the method that delivers the agent to accomplish a search in direct server in substitute for it is transmitted a many contents to accomplish an efficient search. This study proposed the model of retrieval system that shares and searches the distributed educational contents of the bulletin board and newsgroup by using the mobile agent. In order to evaluate the efficiencies of the system that is proposed, we did the comparison test on the search model of existing and proposing system. By a test result, we confirmed network traffics of proposed system are diminished. Moreover we gave proof the fact that the optimum search time of the mobile agent-based system is shortened.

• Journal of information and communication convergence engineering
• /
• v.12 no.2
• /
• pp.122-127
• /
• 2014

This paper proposes a method to manipulate digital hologram contents by manipulating and/or synthesizing the depth information. To synthesize digital holograms themselves in order to create new digital hologram contents. This paper uses both the depth information obtained by converting the disparity information by using a stereo matching method and that obtained by taking pictures with a depth camera. In addition, assuming that digital holograms are created using the computer-generated holography method, we propose a technique for authoring and compositing hologram contents by using either the changes in the three-dimensional positions of objects in the hologram or by combining the objects with other contents by means of changes in the depth information. Further, more than one digital hologram was synthesized to form a hologram. The reconstructed result from the synthesized hologram also contained all the objects in each digital hologram before synthesis at the same positions and distances.

• Journal of Power Electronics
• /
• v.13 no.5
• /
• pp.877-883
• /
• 2013

This paper discussed a transformer-less shunt static synchronous compensator (STATCOM) with consideration of the following aspects: fast compensation of the reactive power, harmonic cancelation and reducing the unbalancing of the 3-phase source side currents. The STATCOM control algorithm is based on the theory of instantaneous reactive power (P-Q theory). A self charging technique is proposed to regulate the dc capacitor voltage at a desired level with the use of a PI controller. In order to regulate the DC link voltage, an off-line Genetic Algorithm (GA) is used to tune the coefficients of the PI controller. This algorithm arranged these coefficients while considering the importance of three factors in the DC link voltage response: overshoot, settling time and rising time. For this investigation, the entire system including the STATCOM, network, harmonics and unbalancing load are simulated in MATLAB/SIMULINK. After that, a 35KVA STATCOM laboratory setup test including two parallel converter modules is designed and the control algorithm is executed on a TMS320F2812 controller platform.