• Journal of Communications and Networks
• /
• v.8 no.3
• /
• pp.351-359
• /
• 2006

In this article, we present a new slow-start variant, which improves the throughput of transmission control protocol (TCP) Vegas. We call this new mechanism Gallop-Vegas because it quickly ramps up to the available bandwidth and reduces the burstiness during the slow-start phase. TCP is known to send bursts of packets during its slow-start phase due to the fast window increase and the ACK-clock based transmission. This phenomenon causes TCP Vegas to change from slow-start phase to congestion-avoidance phase too early in the large bandwidth-delay product (BDP) links. Therefore, in Gallop-Vegas, we increase the congestion window size with a rate between exponential growth and linear growth during slow-start phase. Our analysis, simulation results, and measurements on the Internet show that Gallop-Vegas significantly improves the performance of a connection, especially during the slow-start phase. Furthermore, it is implementation feasible because only sending part needs to be modified.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.3
• /
• pp.932-941
• /
• 2014

In this paper, a simulation model for 7-phase BLDC motor drives for an Autonomous Underwater Vehicles (AUV) is proposed. A 7-phase BLDC motor is designed and the electrical characteristics are analyzed using FEA program and the power electronics drives for the 7-phase BLDC motor are theoretically analyzed and the actual implementation has been accomplished using Matlab Simulink. PI controller and fuzzy controller are compared for verifying the validity of the proposed model and the informative results are described in detail. Especially A fuzzy controller is used to characterize 7-phase BLDC motor, drive systems under normal and fault operating conditions.

• ETRI Journal
• /
• v.25 no.1
• /
• pp.19-24
• /
• 2003

This paper describes the performance of a Ku-band 5-bit monolithic phase shifter with metal semiconductor field effect transistor (MESFET) switches and the implementation of a ceramic packaged phase shifter for phase array antennas. Using compensation resistors reduced the insertion loss variation of the phase shifter. Measurement of the 5-bit phase shifter with a monolithic microwave integrated circuit demonstrated a phase error of less than $7.5{\circ}$ root-mean-square (RMS) and an insertion loss variation of less than 0.9 dB RMS for 13 to 15 GHz. For all 32 states of the developed 5-bit phase shifter, the insertion losses were $8.2{\pm}1.4$dB, the input return losses were higher than 7.7 dB, and the output return losses were higher than 6.8 dB for 13 to 15 GHz. The chip size of the 5- bit monolithic phase shifter with a digital circuit for controlling all five bits was 2.35 mm ${\times}$1.65 mm. The packaged phase shifter demonstrated a phase error of less than $11.3{\circ}$ RMS, measured insertion losses of 12.2 ${\pm}$2.2 dB, and an insertion loss variation of 1.0 dB RMS for 13 to 15 GHz. For all 32 states, the input return losses were higher than 5.0 dB and the output return losses were higher than 6.2 dB for 13 to 15 GHz. The size of the packaged phase shifter was 7.20 mm${\times}$ 6.20 mm.

• Journal of Forest and Environmental Science
• /
• v.36 no.3
• /
• pp.243-254
• /
• 2020

This study was conducted to develop a forest education program through middle school curriculum linkage. We used the ADDIE model, comprising the five phases of Analysis, Design, Development, Implementation and Evaluation, to secure the objectivity of the program. In the Analysis phase, middle school textbooks were analyzed while considering middle school students' needs for curriculum linkage and the developmental stages of adolescents. The Design phase focused on promoting an understanding of curriculum subjects based on what was reviewed in the Analysis phase and concretized and organized a program that can be implemented in the forest, with a focus on science and physical education, based on the results of middle school students' needs. We also established the objectives and goals of curriculum linkage forest education, established the concept of the program, and selected the educational contents, teaching-learning methods, and evaluation methods. In the Development phase, we developed a 2-night, 3-day program linkage with the middle school curriculum and created a manual for instructors and a workbook for students. In the Implementation phase, we revised and supplemented the program through the first test operation with 24 students in their second year of middle school, after which, we carried out a six-session program for the 2-night, 3-day as the second test operation with 17 students in their second year of middle school. In the Evaluation phase, the program was evaluated by the students who participated in the second test operation using questionnaires on satisfaction and curriculum linkage understanding as well as rating scales for attitudes toward forests and environmental sensitivity. The results showed that middle school students showed positive significance in satisfaction and understanding of the middle school curriculum as well as attitudes toward forests and environmental sensitivity through the forest education program.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.9
• /
• pp.906-913
• /
• 2009

In this paper, the design concept and implementation method of the X-band 4-bit($22.5^{\circ}$, $45^{\circ}$, $90^{\circ}$, $180^{\circ}$ BIT) diode phase shifter in the parallel plate waveguide are introduced. The simulated results of $11.25^{\circ}$, $22.5^{\circ}$ and $45^{\circ}$ dielectric phase shift layers using CST's MWS and Agilent's ADS are presented, and the measured results are compared with the simulated ones. The simulated phase shift errors at the center frequency are $0.6^{\circ}$, $0.7^{\circ}$, and $3.5^{\circ}$, respectively and the measured phase shift errors at the center frequency are $0.6^{\circ}$, $2^{\circ}$, and $5.5^{\circ}$, respectively. Also, the MWS simulated results of $22.5^{\circ}$ BIT and $45^{\circ}$ BIT phase shifter are presented and compared with the ADS simulated ones to verify the validity of the presented design concept and implementation method.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.2
• /
• pp.23-34
• /
• 2014

Though a dozen of different software life cycle models are suggested, there is no universal model which can satisfy all the characteristics of software. Organizations mix and match different life cycle models to develop a model more tailored for their systems and capabilities. We suggest overlapped-concurrent development life cycle model that is more suitable in various software development environment. Firstly, we divided the development process into abstract and implementation stage. Abstract stage is from software concept phase to detailed design starting time, and implementation stage is from detailed design phase to system testing phase. Next, the abstract stage introduced the overlapped phase concept that begins the next phase when the step is completed 20% by applying pareto's law. In the implementation stage, we introduced the concurrent development which the several phases are performed some time as when one use-case (UC) is completed the next development phase is started immediately. The proposed model has an advantage that it can reduce the inefficiency of development resource greatly. This model can increase the customer satisfaction with a great product at a low cost and on a short schedule. Also, this model can contribute to increase the software development success rate.

• Journal of Power Electronics
• /
• v.11 no.6
• /
• pp.837-845
• /
• 2011

This paper proposes phase current reconstruction techniques for two-phase two-leg and two-phase four-leg inverters using a single current sensor. In the proposed methods, one phase current is sampled simultaneously with a particular branch current by using only one current sensor, and then current reconstruction algorithms are applied to extract the information on two phase currents from the sensor output. The sampled current information is periodically updated at the peak and the valley of the triangular carrier waveform in each switching cycle of pulse-width modulation (PWM). The voltage vector spaces where the phase currents can be reconstructed are evaluated. Compared to the existing method using two individual current sensors in two phases, the proposed schemes can save implementation cost since it is possible to remove one current sensor. In addition, the proposed methods are free from gain discrepancy issues between two current sensors. Simulations and experiments show excellent current reconstruction performance of the proposed methods.

• Journal of Power Electronics
• /
• v.19 no.4
• /
• pp.934-943
• /
• 2019

A current balance problem exists in multi-phase LLC converters due to the resonant parameter tolerance. This paper presents a current balancing method for interleaved three-phase half bridge LLC converters. This method regulates the phase shift angle of the driving signals between the three phases based on a converter with a floating Y-connection. The floating midpoint voltage has different influences on each phase current and makes the three-phase current balance performance better than midpoint non-floating systems. Phase shift control between modules can further regulate the midpoint voltage. Then three phase current sharing is realized without adding extra components. The current distributions in a midpoint non-floating system and a midpoint floating system are compared. Then the principle and implementation of the proposed control strategy are analyzed in detail. A 3kW prototype is built to verify the validity and feasibility of the proposed method.

• Safety and Health at Work
• /
• v.7 no.3
• /
• pp.185-193
• /
• 2016

Background: Management and workers in small and medium-sized enterprises (SMEs) often find it hard to comprehend the requirements related to controlling risks due to exposure to substances. An intervention study was set up in order to support 45 SMEs in improving the management of the risks of occupational exposure to chemicals, and in using the control banding tool and exposure model Stoffenmanager in this process. Methods: A 2-year intervention study was carried out, in which a mix of individual and collective training and support was offered, and baseline and effect measurements were carried out by means of structured interviews, in order to measure progress made. A seven-phase implementation evolutionary ladder was used for this purpose. Success and failure factors were identified by means of company visits and structured interviews. Results: Most companies clearly moved upwards on the implementation evolutionary ladder; 76% of the companies by at least one phase, and 62% by at least two phases. Success and failure factors were described. Conclusion: Active training and coaching helped the participating companies to improve their chemical risk management, and to avoid making mistakes when using and applying Stoffenmanager. The use of validated tools embedded in a community platform appears to support companies to organize and structure their chemical risk management in a business-wise manner, but much depends upon motivated occupational health and safety (OHS) professionals, management support, and willingness to invest time and means.

• 한국디지털정책학회:학술대회논문집
• /
• 2006.06a
• /
• pp.39-44
• /
• 2006

The purport of this paper is to deduce political implication and significance of the proposed redress scheme of 'Consumer Collective Lawsuit (hereinunder "CCL")' under way to be introduced by the Korean government via various assessments per each phase of policy implementation process. To this end, the paper classifies the subject policy (referring to CCL) implementation process into 4 phases: policy origination, policy enactment, policy advertisement, and policy execution. Based on the said classification, assessments per each phase together with pros and cons analysis have been conducted. Through the aforementioned analysis, the paper concludes the following political implication and significance of CCL under way of introduction: - 1. In the case of policy origination led by external parties, a social consensus by and from involved parties with various interests is the most critical; 2. Prior feasibility and/or suitability study is also crucial in the policy implementation procedure; 3. To mitigate inter-ministerial conflicts that might arise from the due policy making procedure, democratization of conflict settlement mechanism, and institutionalization of participation in and disclosure of policy making process are cal led upon; and 4. Prior planning wi th respect to the public relation and advertisements of the subject policy on the table poses substantial significance.