• 한국방재학회 논문집
• /
• 제11권2호
• /
• pp.193-198
• /
• 2011

본 연구에서는 최근 추세에 맞춰 개발사업시 장치형 및 자연형등의 인위적인 비점오염저감시설이 아닌 시설지를 투수성 포장재를 사용할 경우 얻어지는 효과를 분석하여, 설계 및 시공시 투수성 포장재 적용을 위한 기초자료를 제공하고자 한다. 그 방법으로 개발시 대상지의 면적을 불투수성과 투수성 개발로 분리 적용하여 삭감오염부하량 및 설치 공사비의 경제성을 비교 분석하였다. 그 결과 비점오염원의 처리용량 및 삭감부하량은 투수성 및 불투수성 개발에 많은 영향을 받으며, 개발시 비점오염저 감시설을 장치형이나 자연형을 단독으로 설치하기 보다는 처리대상 유역을 투수성 지역으로 개발하는 것이 배출부하량이 적은것으로 나타났다. 이를 토대로 개발시 비점오염의 관리를 위해 불투수율 면적비를 일정수준으로 제한하는 대책을 수립하면 개발에 따른 오염원의 최소화가 가능할 것으로 생각된다.

• 한국재난정보학회 논문집
• /
• 제12권3호
• /
• pp.242-248
• /
• 2016

본 논문은 GMA(SIS, Stylene Isoprene Stylene) 고분자계 수지를 기반으로 제조된 아스팔트 바인더를 사용하여 플랜트에서 제조하는 혼합물로 방수기능을 갖도록 성능을 개선한 신개념의 불투수성 아스팔트 포장의 연구를 위해 수행하였다. GMA 고분자 수지 기반의 아스팔트는 유연성과 탄성을 바탕으로 중차량의 충격에 의한 영향을 받지 않으며, 우수 시에 포트 홀의 발생과 소성변형 등 여름철 온도 변화에도 안정적이다. 새롭게 제안된 열가소성 폴리머를 사용한 아스팔트 포장재료는 방수기능은 물론 역학적 특성을 검증하기 위해 KS기준과 ASTM기준에 맞게 안정도, 흐름값, 공극률, 동적 안정도, 인장강도비, 미끄럼 저항성 실험을 하여 역학적 특성을 분석 하였다.

• 한국물환경학회지
• /
• 제26권4호
• /
• pp.691-699
• /
• 2010

In recent years, increases in impervious areas with rapid urbanization and land use changes are causing numerous hydrologic cycle and environmental problems. Impermeable pavement have a various defect such as collection rainwater, decreasing of sliding resistance, and etc. In this study, the hydrologic cycle effect of permeable pavement were analyzed by the experiment and the numerical simulation. The numerical model used was a modified SWMM especially for considering the hydrologic cycle effect of permeable pavement. The parameters of modified SWMM were revised by the experimental results. Also, the effects of runoff quantity reduction are reviewed when permeable pavement is applied to Incheon Cheongna watershed. The hydrologic cycle analysis of Incheon Cheongna watershed, continuous simulations of urban runoff were performed. The analysis results of permeable pavement setup effect on runoff are follows: the surface runoff after permeable pavement setup decreases to 74.35% of the precipitation whereas the surface runoff before permeable pavement setup amounts to 81.38% of the precipitation; the infiltration after permeable pavement setup increases to 15.13% of the precipitation whereas the infiltration before permeable pavement setup amounts to 8.32% of the precipitation.

• 한국농공학회논문집
• /
• 제55권3호
• /
• pp.9-12
• /
• 2013

The pavement is generally used on the highways, local loads, roads for bicycle riding and neighborhood living facility such as parking lot, plaza, park and sports facilities. However, the pavement material that is usually used on the most of roads is impermeable asphalt-concrete and cement-concrete. If the pavement material is impermeable, many problems can be happened on the drainage facilities in the rainy season. Additionally, a lot of rainwater on the pavement surface cannot permeate to the underground and flows to the sewage ditch, stream and river, etc. If a lot of rainwater flows at once, the floods can be out along the streams and rivers. So, underground water can be exhausted. Micro organisms cannot live in the underground. Recently, many studies has been conducted to exploit the permeable concrete that has high performance permeability. However, it is required to develop the permeable concrete which has high strength and durability. In this study, permeable and strength tests were performed to investigate the permeable characteristics of porous concrete according to fine aggregate content and substitution ratio of blast furnace slag. In this test, crushed stones with 10~20 mm and sand with 5~10 mm were used as a coarse aggregate and a fine aggregate respectively. The substitution ratio of blast furnace slag to cement weight is 0 %, 15 %, and 30 %. The ratio of fine aggregate to total aggregate is 0 %, 18 %, and 35 %. As a result, permeability coefficient was decreased according to fine aggregate ratio of total aggregate. Compressive strength was also decreased according to substitution ratio of blast furnace slag.

• 한국도로학회논문집
• /
• 제17권4호
• /
• pp.11-18
• /
• 2015

PURPOSES: This study aims to evaluate the runoff reduction with permeable pavements using the SWMM analysis. METHODS: In this study, simulations were carried out using two different models, simple and complex, to evaluate the runoff reduction when an impermeable pavement is replaced with a permeable pavement. In the simple model, the target area for the analysis was grouped into four areas by the land use characteristics, using the statistical database. In the complex model, simulation was performed based on the data on the sewer and road network configuration of Yongsan-Gu Bogwang-Dong in Seoul, using the ArcGIS software. A scenario was created to investigate the hydro-performance of the permeable pavement based on the return period, runoff coefficient, and the area of permeable pavement that could be laid within one hour after rainfall. RESULTS : The simple modeling analysis results showed that, when an impervious pavement is replaced with a permeable pavement, the peak discharge reduced from $16.7m^3/s$ to $10.4m^3/s$. This represents a reduction of approximately 37.6%. The peak discharge from the whole basin showed a reduction of approximately 11.0%, and the quantity decreased from $52.9m^3/s$ to $47.2m^3/s$. The total flowoff reduced from $43,261m^3$ to $38,551m^3$, i.e., by approximately 10.9%. In the complex model, performed using the ArcGIS interpretation with fewer permeable pavements applicable, the return period and the runoff coefficient increased, and the total flowoff and peak discharge also increased. When the return period was set to 20 years, and a runoff coefficient of 0.05 was applied to all the roads, the total outflow reduced by $5195.7m^3$, and the ratio reduced to 11.7%. When the return period was increased from 20 years to 30 and 100 years, the total outflow reduction decreased from 11.7% to 8.0% and 5.1%, respectively. When a runoff coefficient of 0.5 was applied to all the roads under the return period of 20 years, the total outflow reduction was 10.8%; when the return period was increased to 30 and 100 years, the total outflow reduction decreased to 6.5% and 2.9%, respectively. However, unlike in the simple model, for all the cases in the complex model, the peak discharge reductions were less than 1%. CONCLUSIONS : Being one of the techniques for water circulation and runoff reduction, a high reduction for the small return period rainfall event of penetration was obtained by applying permeable pavements instead of impermeable pavement. With the SWMM analysis results, it was proved that changing to permeable pavement is one of the ways to effectively provide water circulation to various green infrastructure projects, and for stormwater management in urban watersheds.

• 한국도로학회논문집
• /
• 제16권2호
• /
• pp.35-41
• /
• 2014

PURPOSES : Surface treatment is a favorable method in the pavement preventive maintenance. This study (Part I) aimed to develop the low viscosity filling material for waterproof characteristics and high penetrable and weather resistance, and a series of companion study (Part II) presents the coating characteristics and performance analysis using field and lab tests. METHODS : Hydrophobic characteristics of the advanced surface treatment material are observed and measured the filling depth and the permeability for sand and asphalt pavement specimen using the water absorption test and permeability test, X-RAY CT test. Color difference for the weather resistance using ultraviolet ray accelerated weathering test is compared with asphalt pavement specimens. RESULTS : The developed material shows the decreased water absorption and increased impermeable effect because of the hydrophobic characteristics. It is found that the filling depth is about 6mm and weather resistance is better than asphalt pavement specimen. CONCLUSIONS : The advanced hydrophobic - low viscosity filling treatment material is developed in this study (Part I) to improve the waterproof characteristics and high filling capacity and weather resistance for the pavement preventive maintenance.

• 한국도로학회논문집
• /
• 제20권3호
• /
• pp.47-57
• /
• 2018

PURPOSES : The permeable pavement type has been rapidly developed for solving problems regarding traffic noise in the area of housing complex and heavy rainwater drainage in order to account for the climate change. In this regards, the objective of this study is to figure out the characteristics of pavement types. METHODS : The laboratory test for deriving optimum asphalt content (OAC) was conducted using the mixtures of the permeable asphalt surface for the pavement surface from Marshall compaction method. Based on its results, the pavement construction at the test field was conducted. After that, the site performance tests for measuring the traffic noise, strength and permeability were carried out for the relative evaluation in 2 months after the traffic opening. The specific site tests are noble close proximity method (NCPX), Light falling deflectometer test (LFWD) and the compact permeability test. RESULTS : The ordered highest values of the traffic noise level can be found such as normal dense graded asphalt, drainage and porous structure types. In the results from LFWD, the strength values of the porous and drainage asphalt types had been lower, but the strength of normal asphalt structure had relatively stayed high. CONCLUSIONS :The porous structure has been shown to perform significantly better in permeability and noise reduction than others. In addition to this study, the evaluation of the properties and the determination of the optimum thickness for the subgrade course under the porous pavement will be conducted using ground investigation technique in the further research.

• 한국농공학회논문집
• /
• 제54권2호
• /
• pp.157-166
• /
• 2012

Most of the roads are paved with impermeable materials such as asphalt concrete and cement concrete, and in the event of heavy rainfall, rainwater directly flows into river through a drainage hole on the pavement surface. This large quantity of rainwater directly spilled into the river frequently leads to the flooding of urban streams, damaging lowlands and the lower reaches of a river. In recent years there has been a great deal of ongoing research concerning water permeability and drainage in pavements. Accordingly, in this research, a porous polymer concrete was developed for permeable pavement by using unsaturated polyester resin as a binder, recycled aggregate as coarse aggregate, fly ash and blast furnace slag as filler, and its physical and mechanical properties were investigated. Also, 3 types of permeable polymer block by optimum mix design were developed and rainfall runoff reduction effects by permeability pavement using permeable polymer block were analyzed based on hydraulic experimental model. The infiltration volume, infiltration ratio, runoff initial time and runoff volume in permeability pavement with permeable polymer block of $300{\times}300{\times}80$ mm were evaluated for 50, 100 and 200mm/hr rainfall intensity.

• 한국환경생태학회지
• /
• 제18권1호
• /
• pp.53-60
• /
• 2004

아파트단지 내부녹지가 온도변화에 미치는 영향을 파악하고자 서울시 서초구, 강남구, 송파구 등 한강 이남지역에 위치한 아파트단지중 36개 지역을 대상으로 연구를 수행하였다. 아파트단지 내부온도는 Landsat ETM＋영상 2scene을 분석하여 추정하였으며 온도변화 영 향요인으로는 토양피복유형과 건물밀도, 식생활력도로 구분하였다. 토양피복유형과 아파트단지내 온도와의 상관관계 분석결과 녹지율은 음(－)의 상관관계를, 불투수포장율은 양(＋)의 상관관계를 보였으며 건폐율은 유의성이 인정되지 않았다. 투수포장지를 녹지면적과 불투수포장면적에 각각 합산한 값과 온도값의 상관관계 분석결과 투수포장면적을 불투수포장면적에 합산하여 산출한 상관계수보다 녹지면적에 합산하는 것이 상관계수가 보다 높게 나타나 투수포장지역도 녹지지역과 함께 도시온도를 낮추는 요소로 작용하는 것으로 판단되었다. 건물밀도의 요소로 선정한 용적율은 온도값과 유의성이 없었으며 NDVl는 값이 높을수록 온도가 낮았다. 아파트단지내 온도분포모형 구축을 위해 투수＋녹지율, 녹지율, 건폐율, NDVI값을 독립변수로, 대상지온도를 종속변수로 한 회귀분석 결과 두 시기 영상 모두 독립변수 중 투수＋녹지율만이 회귀식에 채택되었으며 회귀식의 수정 결정 계수($R^2$)는 각각 41.4(2000년 9월)와 40.4(2001년 6월)이었다.

• 한국조경학회지
• /
• 제32권6호
• /
• pp.82-94
• /
• 2005

This study was undertaken to measure and analyze the thermal environment characteristics of the grey permeable cement concrete pavement(GPCCP), the permeable cement concrete brick pavement(PCCBP) compared with impermeable cement concrete pavement(ICCP) and bare soil(BS) under the summer outdoor environment. Following is a summary of major results. 1) The peak surface temperature was greatest in the GPCCP$(54.2^{\circ}C)$ followed by ICCP$(47.2^{\circ}C)$ rut August 2, 2002, the hottest day$(35.3^{\circ}C\;of\;highest\;temperature)$ during the experiment; peak temperature in the ICCP and BS were $45.5^{\circ}C)$ and $45.3^{\circ}C)$ respectively. 2) Analysis of heat budget of the pavements has revealed that the heat environment was worse in the GPCCP than that in the ICCP and that this was mainly due to a low albedo in the former(0.2) relative to that of the latter(0.4). 3) Analysis of heat budget of the pavements has revealed that the heat environment was worse in the GPCCP than that in the PCCBP, BS and that this was mainly due to a decreased latent heat resulting from a time dependent decreasing impact of rainfall. 4) It is necessary to make cool pavements to further studies on light-colored surface materials for attaining high albdo and construction methods which can enhance the latent heat through the continuous evaporation from pavements surface. 5) Vertical arrangement of pavement layers has not been considered in the present study, which has been focuses on the heat characteristics of the surface layer materials. Accordingly, future studies will have to be empasized on pavement methods including the vertical arrangement of the pavement layers.