• 비파괴검사학회지
• /
• 제22권4호
• /
• pp.354-360
• /
• 2002

NDT나 의료용 영장장치에 응용되는 압전복합재는 일반적인 세라믹이나 고분자 압전재료에 비하여 많은 장점을 가진다. 이들 응용분야에서는 전기기계결합계수가 높아야 하고 음향임피던스가 낮아야 한다. 그러나, 압전복합재의 횡방향 단위 크기가 조밀하지 못할 경우 횡방향으로 진행하는 판파에 의한 불필요한 진통이 표면에 발생하게 된다. 횡방향 단위 크기와 세라믹 체적비에 따른 압전 특성을 조사하기 위하여 PMN-PZT 세라믹과 Epofix 에폭시로 에폭시의 폭의 달리하면서 1-3형 압전복합채를 제작하였다. 제작된 1-3형 압전복합재의 두께방향 진동모드의 전기기계결합계 수, 음향임피던스는 각각 $0.36{\sim}0.64,\;9.8{\sim}22.7MRayl$ MRayl로 나타났으며, 횡방향 단위크기가 줄어들수록 횡방향 모드 공진 주파수가 증가하였다.

• 센서학회지
• /
• 제13권6호
• /
• pp.462-472
• /
• 2004

In this study, we measured the blood flow on arm by non-invasive method and implemented a system to measure variation of the blood flow by estimating bio-electrical impedance and arterial pressure according to cuff pressure. The implemented system measured impedance variation according to pressure variation applied by artificial cuff pressure on the measuring position. The system consisted of pressure measuring part and impedance measuring part using 4-electrode method. Pressure measuring part was composed of semiconductor pressure sensor and electronic circuit for signal processing of sensor output signal. In addition, impedance measuring part was composed of constant current source circuit and lock-in amplifier for detecting impedance signal. We conducted experiments of impedance measuring part using standard resistance for performance evaluation of the implemented system. In addition we experimented to estimate variation of the blood flow by measuring impedances of the experimental group. We estimated ratio of the blood flow resistance using mean arterial pressure and variation of the blood flow. As a result the ratio of the blood flow resistance and variation of blood flow were in an inverse relationship with each other and the correlation coefficient was -0.96776.

• 대한기계학회논문집A
• /
• 제39권5호
• /
• pp.499-505
• /
• 2015

압전 진동 에너지 수확 장치의 설계 및 성능 평가 시 에너지 변환 효율을 고려하는 것은 매우 당연하다. 본 연구에서 고려하는 에너지 변환 효율은 부하 저항이 부착된 압전 진동 에너지 수확 장치에 입력되는 가진 진동 파워 대비 전기 출력 값으로 정의된다. 기존의 연구에서는 근사적으로 임피던스 정합된 부하 저항에서의 전기 출력을 고려한 반면, 본 연구에서는 최적의 임피던스 정합 값을 사용하여 새롭게 에너지 변환 효율 식을 유도하였다. 유도된 식의 타당성을 검증하기 위해 3 개의 서로 다른 전기-역학 연성 계수 값을 갖는 진동 에너지 수확 장치에 대한 유한 요소 해석 결과를 이용하였다. 또한, 부하 저항의 임피던스 정합 방법의 차이에 따른 에너지 변환 및 변환 효율 특성을 살펴보았다.

• 한국인터넷방송통신학회논문지
• /
• 제18권1호
• /
• pp.43-46
• /
• 2018

본 논문은 향상된 성능을 가진 개선 된 헤어핀 커플 링 구조인 스텝 임피던스 공진기 (SIR : Stepped Impedance Resonator)를 이용한 광대역 대역저지 여파기 (WBSF : Wide Band Stop Filter)를 설계하였다. SIR WBSF는 크기가 작고 탁월한 대역저지 특성을 갖는 장점이 있다. 설계된 BSF는 ${\lambda}/4$길이의 사각 모양의 헤어핀형을 입력과 출력 전송 라인 상측과 하측에 배치하여 대칭형이 되도록한 구조이다. 입출력 단자는시스템 응용을 위해 50 ohm으로 종단 되었다. SIR WBSF의 중심 주파수는 3.15 GHz의 제2 고조파 인 6.3 GHz이다. 설계된 여파기의 3dB 대역폭은 2.9 GHz이고 전송계수 ($S_{21}$)는 33.2 dB이다. 중심 주파수에서 반사계수 ($S_{11}$)은 0.106 dB이다. 응용분야는 육상고정 마이크로웨이브 중계국, 고정된 위성과 지구국, 고정 위성간 통신에 사용된다. 전체 크기는 $20mm{\times}10mm$이다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.340-345
• /
• 2003

In this paper, the ultrasonic attenuation coefficient was measured by variation of crack length for double-cantilever beam(DCB) specimen. The energy release rate, G, was obtained by the experimental measurement of compliance. The experimental results represents that the relation between crack length for the ultrasonic attenuation coefficient and energy release rate is increased proportionally. From the results of experiments, the measurement method of crack length by the ultrasonic attenuation coefficient was proposed and discussed.

• 대한기계학회논문집A
• /
• 제28권4호
• /
• pp.386-393
• /
• 2004

In this paper, the ultrasonic attenuation coefficient was measured by variation of crack length for double-cantilever beam(DCB) specimen. The energy release rate, G, was obtained by the experimental measurement of compliance. The experimental results represents that the crack length for the ultrasonic attenuation coefficient and energy release rate is increases proportionally From the experimental results, we proposed a detecting method of the crack length by the ultrasonic attenuation coefficient and discussed it.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 하계종합학술대회 논문집(2)
• /
• pp.477-480
• /
• 2004

We studied the characteristics of impedance and electromechanical coupling coefficient in ZnO and AIN thin films by using resonance frequency spectrum method. The response peak of impedance decreased with the decrease of thickness of piezoelectrics, the number of mode of response peak increased with the increase of substrate thickness. An error of $k_{t}^{2}$ estimated from input $k_{t}^{2}$ increased as the thickness of piezoelectrics decreased and the thickness of substrate increased. Also, the error was increased in case of a large acoustic impedance of substrate. It was found that the composite resonator operating in optimized condition could be designed through the resonance frequency spectrum analysis of composited resonator consisted of piezoelectric thin film and substrate.

• The Journal of the Acoustical Society of Korea
• /
• 제20권3E호
• /
• pp.10-17
• /
• 2001

The possibility is investigated of determining the diffuse absorption coefficients of the wall surfaces in a real room by minimizing the errors between the measured energy impulse response of a real room and the predicted energy impulse responses obtained from the ray tracing simulation of the room. In other words, this can possibly serve as a basis for "acoustical system identification" in attempting to determine the "best fit" of modelled absorption coefficients to measured energy response data. Algorithms for attempting this were investigated. The algorithms developed for this purpose proved to be rigorous and efficient. Instead of using the ray tracing model to determine the absorption coefficients, the phase image model was used in order to determine the acoustic impedances of wall surfaces. However, the numerical algorithms could not find the correct impedance values, primarily due to the wide range of the acoustic impedance values of any single acoustic material and very long computation time.

• 전기학회논문지
• /
• 제56권9호
• /
• pp.1626-1631
• /
• 2007

This paper presents a new modeling method using lamp output power and the modeling coefficients of the lamp. The proposed method utilizes the lamp modeling coefficients such as equivalent impedance Z(p), coupling coefficient of the transformer k(p), turns ratio of the transformer n(p), and plasma resistance Rp(p) as a function of lamp output power. The equivalent impedance Z(p) was developed from the equivalent resistance Req(p) and equivalent inductance Leq(p) of the lamp. Simulation and experimental results of the proposed model are presented in order to validate the proposed method. The modeling method can use to design an impedance matching circuit for a Class-D inverter.

• International journal of advanced smart convergence
• /
• 제1권2호
• /
• pp.16-19
• /
• 2012

A modified 4-coil magnetic resonance wireless power transfer (MRWPT) system is proposed. Four coils based on 2-coil system with additional two matching coils were used in this topology. When Tx-Rx distance is changed, the input impedance is changed. However, it can be adjusted by coil parameters of matching coils to maintain impedance matching for maximum efficiency. The equivalent circuit of MRWPT system was analyzed for both transmission function and optimum coupling coefficient of the matching coils. By using four spiral resonant coils, these design considerations was experimentally verified. The measured data agreed well with the calculated data and the transmission function of the proposed system was more efficient than that of conventional 2-coil system.