• 한국기계가공학회지
• /
• 제16권4호
• /
• pp.16-23
• /
• 2017

CFRP(Carbon Fiber Reinforced Plastics) has many industrial applications due to its low weight and high strength properties. Due to its superior properties, for example, excellent resistance to fatigue wear, corrosion, and breakage from fatigue, it has been widely applicable to aircraft, automotive, and medical industries and so on. The main machining for CFRP is drilling, and route milling. In case of drilling, the machining defects such as the delamination of each layer, uncut fiber, resin burning, spalling, and exit burrs are inevitable. The issue to remove such kind of defects is necessary to make CFRP parts successful. From this point of view, this paper investigates the removal effectiveness of machining defects existing at exit region with different type of tool geometries. Consequently, based on the experiments, the tool geometry is most impact factor to remove uncut fiber or resin.

• Design & Manufacturing
• /
• 제10권1호
• /
• pp.26-30
• /
• 2016

In this study, it was investigated by comparing the experimental hemming by the 3 steps and 2 steps in order to stabilize the quality of the hemming process. In the experimental results, the three-step hemming superior to the two-step one and the dimensional stability of part that was made by the three-step on was high. When the second stage Hemming has been found that the deflection caused by the force to the wear of the punch becomes larger plane can be folded by the hemming crimping and crimp uncertain.

• 한국주조공학회지
• /
• 제4권2호
• /
• pp.96-101
• /
• 1984

The morphologies of eutectic cell formed during solidification affect on the mechanical properties in high Cr cast iron. In order to investigate the influence of Si on the structure, five kinds of specimen containing 16.42% Cr with varying amount of Si (0.51%, 1.17%, 2.22%, 2.71%, 3.56%) were poured into shell mould preheated $330^{\circ}C$ at $1510^{\circ}C$. The effect of Si on matrix in hypo-eutctic Cr cast iron (2.48% C, 16.42%) were studied through its mechanical tests and observation of microstructure using of metallurgical microscope, EPMA, SEM and Image analyzer systematically. The results obtained from the above studies are as follows: 1. Because of ${\Delta}T$ decreasing with increasing Si content, the morpologies of colony change into uniform bar-type carbide from plate-type ones, moreover eutectic colony size (Ew) becomes narrow and spacing of carbide wider. 2. As Si content increases, the amount of carbides also increases and most of Cr were dissolved in carbides while Si in matrix. 3. The hardness, tensile strength and wear resistance were increasing while impact value decreased with increasing Si content. 4. In fracture section, small amount of dimple pattern was observed in less than 1.17% Si but more than 2.22% Si river pattern was presented.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.194-202
• /
• 2008

In this study, we investigated the tribology behaviour of two different bearing materials. One of these alloys content is Cu(90)-Sn(10) alloy and is widely used in the automotive industry.The other is Al alloy. This bearing content is Al-Sn-Si-Cu. Therefore, it is required to study on the lublicating characteristics of bearing according to different materials. In this study, compressor bearings made by respectively "PTFE solid lubricant" and "AI alloy with superior load carrying capacity, rubbing and impact endurance", have gone through journal bearing test. Lubrication and abrasion characteristics are evaluated by analyzing the material characteristics of a scroll compressor bearing bush. The AI alloy bearing showed the most excellent lubrication and abrasion characteristics than Cu-Sn alloy under high load condition.

• 한국의류학회지
• /
• 제36권11호
• /
• pp.1137-1147
• /
• 2012

Self-congruency plays an important role in the context of mothers' shopping for children's clothing because purchasers are inconsistent with users. This study incorporates three dimensions of self-congruencies (congruency between children's image perceived by their mothers and brand image, congruency between mothers' actual self-image and brand image, and congruency between mothers' ideal self-image and brand image) due to purchaser-user inconsistency in children's clothing consumption. A total of 574 mothers with children aged 6 to 10 participated in a web-based survey. Descriptive statistical analysis, factor analysis, reliability analysis and multiple regression analysis were conducted. Self-brand image congruency variables have a different influence on brand attitudes when mothers purchase children's clothing. Brand attitude is influenced positively only when the perceived children's image coincides with brand image and when mothers' ideal self-image corresponds to brand image. In contrast, mothers' actual self-image and brand image congruence negatively influence brand attitude. Further investigation indicates that there are different effects of dimensions of self-congruency on brand attitude according to the characteristics of mothers and their children. This study suggests that when there is purchaser-user inconsistency, different types of image congruence has to be implemented to assess the impact on brand attitudes.

• 폴리머
• /
• 제29권1호
• /
• pp.14-18
• /
• 2005

${\varepsilon}$-카프로락탐(CL)의 음이온 중합에 있어서 개시제의 양을 고정하고 촉매 양을 변화시키면서 합성한 나일론의 분자량, 기계적 물성 및 마찰 특성에 관하여 연구하였다. 전체적으로 촉매/개시제 비율이 높을수록 중합속도, 반응전 환율 및 분자량은 증가하였으며, 충격강도를 제외한 물성도 향상되었으나, 촉매/개시제 비율 1.0% 이상에서는 큰 변화가 나타나지 않았다. 한편, 나일론의 마찰 특성은 기계적 물성 중에서도 인장강도 및 경도에 의해 직접적으로 영향을 받는 것으로 나타났다. 마찰계수, 응력(p)과 운동속도(v)의 곱인 PV 한계 및 상대마모량의 측정 결과를 종합하면, 촉매/개시제 비율 1.0% 하에서 제조된 나일론이 마찰 기계요소로서는 최적의 성질을 갖는 것으로 밝혀졌다.

• 한국재료학회지
• /
• 제4권7호
• /
• pp.817-822
• /
• 1994

비슷한 역학적 특성을 갖는 단면의 형상이 C형인 탄소섬유와 전형적인 원형탄소섬유를 에폭시를 모재로 하여 상호의 단면 형상이 강화 효과에 미치는 영향을 실험하였다. 실험결과 C 형 탄소 섬유 강화 복합재가 굴곡강도(218%), 굴곡탄성률(223%), 충간전단강도(157%), 충격강도(227%), 횡굴곡강도(184%)등의 모든 기계적 특성 부분에서 우수한 성능을 보였으며, 또한 재료의피로수명, 마찰/마모계수와 같은 기계적 특성과도 많은 상관을 보이는 것으로 알려진 제진(damping)특성에 있어서도 약 185% 정도의 높은 값을 보였다. 본 연구팀은 이와 같은 비원형 탄소섬유(C형)의 강화 효과및 가능성을 확인하여 제시하는 바 이다.

• The Journal of Asian Finance, Economics and Business
• /
• 제8권5호
• /
• pp.1011-1017
• /
• 2021

An effective measure to prevent the spread of COVID-19 is wearing masks in public places. This solution is highly recommended in many countries all over the world. The objective of this study is to identify the antecedents of citizens' intention to purchase masks during the COVID-19 pandemic. Based on the theory of planned behavior (TPB), the current study analyzes attitudes toward mask-purchasing, subjective norms, and perceived behavioral control, to assess their impact on intention to purchase masks. In total, six variables are examined: attitude toward mask-wearing, subjective norms, perceived behavioral control, perceived severity, perceived susceptibility, and the intention to wear masks. Data are collected from 243 respondents in Ho Chi Minh City, Vietnam. They were processed through by factor analysis and multiple regressions. The results report that all three factors positively affect citizens' intention to buy masks in the following ascending order: Attitude toward mask-purchasing, subjective norms, and perceived behavioral control. Our study is the first research that applies TPB to investigate citizens' intention to purchase masks to during the COVID-19 pandemic. Moreover, this study provides guidelines to the Vietnamese public managers to combat COVID-19 through the purchase of masks. Shopkeepers would be well advised to observe the intentions of consumers toward masks.

• Elastomers and Composites
• /
• 제54권2호
• /
• pp.135-141
• /
• 2019

Polyphenylene sulfide (PPS) was filled with glass fiber (GF), aramid fiber (AF), and solid lubricants to improve the mechanical properties and wear resistance. The addition of GF effectively enhanced the tensile strength, flexural modulus, and impact strength of PPS, while solid lubricants such as polytetrafluoroethylene (PTFE), molybdenum disulfide ($MoS_2$), and tungsten disulfide ($WS_2$) lowered the friction coefficients of the composites to below 0.3. The ball nut and motor pulley of the electric power steering (EPS) were manufactured using the PPS composites, and feasibility was ascertained thereafter by conducting the durability test. The composites filled with GF and AF showed high mechanical strength, but slip occurred at the interface between the pulley and belt while testing above $50^{\circ}C$. When small amounts of lubricants were added, the slip was no longer detected because of the suppression of friction heat. It is realized that the low friction as well as high mechanical properties is important to ensure the reliability of plastic pulleys.

• Design & Manufacturing
• /
• 제16권4호
• /
• pp.17-23
• /
• 2022

Recently, several studies are being conducted to achieve a curvature of 180° or more for the edge of the display glass. The thermocompression molding process is applied to the manufacture of curved glass, and high hardness G5 graphite is used as the mold material to withstand the impact applied to the mold. G5 graphite has high hardness and strong brittleness, which makes tool wear and surface damage easy during machining. Therefore, the demand for diamond-coated tools with good mechanical properties is increasing in the G5 machining field. In this study, the optimal cutting conditions and machinability of a nanodiamond (NCD) coated ball end mill being developed by a tool manufacturer were analyzed and evaluated. For this purpose, the same test was performed on the microdiamond (MCD) coated ball end mill and compared together. In summary, the machinability of MCD and NCD coated tools showed better cutting performance at a cutting speed of 282 m/min, a feed rate of 1,400 mm/min, and a radial depth of cut of 0.08 to 0.1 mm.