• International Journal of Precision Engineering and Manufacturing
• /
• 제6권1호
• /
• pp.36-41
• /
• 2005

• Composites Research
• /
• 제27권2호
• /
• pp.42-46
• /
• 2014

본 연구에서는, 발포 폴리프로필렌의 충격에너지 흡수특성이 충격체 질량과 속도중 어느 변수에 더 많은 영향을 받는 지 고찰해 보기 위하여, 충격체 질량과 속도에 변화를 주어 5개의 조합을 만들고, 이 조합들이 동일한 초기 충격에너지 조건(100 J 및 200 J)이 될 수 있도록, 값을 선정한 뒤, 충격시험을 수행하여, 충격에너지 흡수특성을 실험적으로 규명하였다. 또한 발포 폴리프로필렌의 기본적인 특성을 파악하기 위하여, 준정적 시험(Quasistatic test)도 수행되었다. 준정적 시험은 MTS 858을 이용하였고, 충격시험을 위해, Instron dynatup 9250 HV가 사용되었다. 충격시험결과, 발포 폴리프로필렌은 충격체 속도에 비해 질량에 더 많은 영향을 받는 것으로 나타났다.

• 한국자동차공학회논문집
• /
• 제25권3호
• /
• pp.374-379
• /
• 2017

In vehicle to pedestrian accidents, cracks occur in the vehicle laminated glass due to impact of a pedestrian's head. In this study, FMH(Free Motion Headform) was used to experiment on and analyze the crack patterns on a vehicle laminated glass that collides with an adult headform at speeds of 20 km/h, 30 km/h, and 40 km/h, respectively. Applying the acquired experimental data and material property of the vehicle laminated glass to the structural analysis program LS-Dyna, we could develop the FE model of vehicle laminated glass similar to real vehicle laminated glass. We could estimate the head impact velocity and pedestrian's vehicle impact velocity using the Madymo program.

• 한국분무공학회지
• /
• 제17권2호
• /
• pp.86-93
• /
• 2012

The effects of projectile impact system on the transient spray characteristic which is supersonic liquid tip velocity were studied by experimentally. Supersonic liquid jets were generated by impact of a high speed projectile driven by a Two-stage light gas gun. A high speed camera and schlieren optical system were used to capture the spray structures of the supersonic liquid jets. In a case of nozzle assembly Type-A, expansion gases accelerate a projectile which has a mass of 6 grams from 250 m/s at the exit of the launch tube. Accelerated projectile collides with the liquid storage part, then supersonic liquid jets are injected with instantaneous spray tip velocity from 617.78 m/s to 982.54 m/s with various nozzle L/d. However, In a case of nozzle assembly Type-B which has a heavier projectile (60 grams) and lower impact velocity (182 m/s), an impact pressure was decreased. Thus the liquid jet injected at 210 m/s of the maximum velocity did not penetrate a shock wave and fast break-up was occurred. Pulsed injection of liquid column generated second shock wave and multiple shock wave.

• 환경영향평가
• /
• 제22권1호
• /
• pp.99-107
• /
• 2013

This study is an impact assessment of building blocks on urban inundation depth and area. LiDAR data is used to generate two original data set in terms of DEM with $5{\times}5$ meter and building block elevation layer of the study drainage area in Cheongju and then the building block elevation layer is modified again to the mesh data with same size to DEM. Two-dimensional inundation analysis is carried out by applying 2D SWMM model. The inundation depth calculated by using the building block elevation layer shows higher reliability than the DEM. This is resulted from the building block interference to surface flow. In addition, the maximum flooded area by DEM is two times wider than the area by building block layer. In the case of the surface velocity, the difference of velocity is negligible in either DEM or building block case in the low building impact zone. However, If the impact of building on the surface velocity was increase, the gap of velocity was significant.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2007년도 제28회 춘계학술대회논문집
• /
• pp.75-78
• /
• 2007

본 연구에서는 터보 팬 엔진 나셀 복합재 구조의 충격 손상에 관한 연구를 수행하였다. 연구 결과의 신뢰성 검증을 위해 선행 연구된 결과와 비교 분석하였다. 샌드위치 구조의 형상은 카본/에폭시 면재와 폼 코어로 형성되어있다. 샌드위치 패널의 유한 요소 해석 결과 해석 결과의 타당성을 확인하였다. 초기 손상이 발생하는 속도가 평가되었고 예측된 속도에서 충격 해석이 수행되었다. 충격 해석 결과 예측된 충격 손상에서 손상이 발생하는 것으로 확인되었다.

• Computers and Concrete
• /
• 제20권6호
• /
• pp.711-718
• /
• 2017

Nanotechnology is a new filed in concrete structures which can improve the mechanical properties of them in confronting to impact and blast. However, in this paper, a mathematical model is introduced for the concrete models subjected to impact load for wave propagation analysis. The structure is simulated by the sinusoidal shear deformation theory (SSDT) and the governing equations of the concrete model are derived by energy method and Hamilton's principle. The silicon dioxide ($SiO_2$) nanoparticles are used as reinforcement for the concrete model where the characteristics of the equivalent composite are determined using Mori-Tanaka approach. An exact solution is applied for obtaining the maximum velocity of the model. In order to validate the theoretical results, three square models with different impact point and Geophone situations are tested experimentally. The effect of different parameters such as $SiO_2$ nanoparticles volume percent, situation of the impact, length, width and thickness of the model as well as velocity, diameter and height of impactor are shown on the maximum velocity of the model. Results indicate that the theoretical and experimental dates are in a close agreement with each other. In addition, using from $SiO_2$ nanoparticles leads to increase in the stiffness and consequently maximum velocity of the model.

• Composites Research
• /
• 제22권1호
• /
• pp.1-8
• /
• 2009

본 논문에서는 면내하중을 받는 복합적층판의 저속충격거동과 손상을 해석하였다. 초기부터 존재하는 면내변형률을 고려하여 판의 변위장을 새롭게 가정하고, 이 가정된 변위장에 따른 적층판의 구조거동에 대한 유한요소방정식을 유도하였으며, 유한요소해석 프로그램을 코딩하였다. 유한요소해석을 수행하여 참고문헌의 수치해석 결과와 비교하였으며, 충격에너지는 동일하나 충격체의 질량과 속도가 다른 조건에 대해서도 해석하여 초기 면내하중의 영향을 분석하였다. 바닥으로부터 첫 번째 층간면에서의 잠재적인 층간분리 파손영역을 추정하여 초기 인내하중 및 충격조건에 따른 크기의 변화를 고찰하였다.

• 한국운동역학회지
• /
• 제13권2호
• /
• pp.65-74
• /
• 2003

The purpose of this study was to analyze kinematic variables in the badminton smash motion through 3-dimensional image analysis. The kinematic variables were velocity of joints in upper limbs, the angle of wrist in the impact, and the angular velocity of the top of racket head. The smash motions of four male badminton players in H University and four male students at department of the physical education in K University who were not majoring in badminton were analyzed kinematically and the attained conclusions were as follow. 1. The velocity of segments in upper limbs of the unskilled group was faster than that of the skilled group. The movement pattern was fast back swing-slow impact moment-fast fellow through in the unskilled group, but slow back swing-fast impact moment-slow follow through in the sullied group. 2. As the BS phases, the velocity of segment in right shoulder was different significantly between groups. Right elbow and right wrist segments, velocity of racket head was different significantly between groups(p<.05) by IP phases. As the FT phases, there was no significant difference. 3. The angle of right wrist at the impact, the angle of palm flexion and the angle of palm flexion in aspect were shown that the skilled group was higher than unskilled group. There was no significant difference. 4. The velocity of racket head was shown that the unskilled group has fast velocity, but the angle velocity was shown the unskilled group has slow. 5. The angle velocity of racket head in aspect were no significant difference between groups, but maximal angle velocity was different significantly between groups(p<.05).

• Computers and Concrete
• /
• 제5권6호
• /
• pp.509-524
• /
• 2008

Containment structures not only are leak-tight barriers, but also may be subjected to impacts caused by tornado-generated projectiles, aircraft crashes or the fragments of missile warhead. This paper presents the results of an experimental study of the impact resistance of steel fiber-reinforced concrete against 45 g projectiles at velocity around 2500 m/s. An explosively formed projectile (EFP) was designed to generate an equivalent missile fragment. The formation and velocity of EFP are measured by flash x-ray. A switch made of double-layered thin copper sheets controlled the exposure time of each flash x-ray. The influence of the fiber volume fraction on the crater diameter of concrete slab and the residual velocity of the projectile were studied. The residual velocity of the projectile decreased as the fiber volume fractions increased. In this work, the residual velocity of the projectile was to 44% that of plain concrete when the fiber volume fraction exceeded 1.5%. Based on the present finding, steel fiber reinforced concrete with the fiber volume fraction exceeding 1.5% appear to be more efficient in protection against high velocity fragment impact.