• Journal of the Korean Society for Nondestructive Testing
• /
• v.28 no.2
• /
• pp.191-198
• /
• 2008

Flow accelerated corrosion (FAC) phenomenon of low alloy carbon steels in nuclear power plant has been known as one of major degradation mechanisms. It has a potential to cause nuclear pipe rupture accident which may directly impact on the plant reliability and safety. Recently, the equipotential switching direct current potential drop (ES-DCPD) method has been developed, by the present authors, as a method to monitor wall loss in a piping. This method can rapidly monitor the thinning of piping, utilizing either the wide range monitoring (WiRM) or the narrow range monitoring (NaRM) technique. WiRM is a method to monitor wide range of straight piping, whereas NaRM focuses significantly on a narrow range such as an elbow. WiRM and NaRM can improve the reliability of the current FAC screening method that is based on computer modeling on fluid flow conditions. In this paper, the measurements by ES-DCPD are performed with signal sensitivity analyses in the laboratory environment for extended period and showed the viability of ES-DCPD for real plant applications.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.7
• /
• pp.974-981
• /
• 2002

Faba beans (vicia faba) (FB) and lupin seeds (Lupinus Albus) (LS) were dry roasted at three temperatures (110, 130, $150^{\circ}C$) for 15, 30 or 45 min to determine the effects of dry roasting on rumen degradation of crude protein and starch free organic matter ($^{PSF}OM$). Rumen degradation characteristics of $^{PSF}OM$ were determined by the nylon bag incubation technique in dairy cows fed 60% hay and 40% concentrate. Measured characteristics of $^{PSF}OM$ were undegradable fraction (U), degradable fraction (D), soluble fraction (S), lag time (T0), and the rate of degradation (Kd). Based on the measured characteristics, rumen availability ($RA^{PSF}OM$) and bypass $^{PSF}OM$ ($B^{PSF}OM$) were calculated. Dry roasting did not have a greater impact on rumen degradation characteristics of $^{PSF}OM$ (p>0.05). S varied from 32.1 (raw) to 30.0, 27.8, 30.8% (LS) and 15.4 (raw) to 14.4, 20.8, 20.9% (FB); D varied from 65.4 (raw) to 66.3, 66.9, 55.9% (LS) and 54.9 (raw) to 55.0, 51.0, 64.7% (FB); U varied from 2.6 (raw) to 7.3, 7.0, 7.7% (LS) and 29.7 (raw) to 30.6, 28.2, 14.4% (FB); Kd varied from 6.0 (raw) to 7.3, 7.0, 7.7% (LS) and 22.4 (raw) to 24.4, 21.1, 7.9% (FB); $B^{PSF}OM$ varied from 35.5 (raw) to 33.8, 36.6, 38.2% (LS) and 41.3 (raw) to 41.5, 39.7, 47.6% (FB) at 110, 130 and $150^{\circ}C$, respectively. Therefore dry roasting did not significantly affect $RA^{PSF}OM$, which were 353.7, 367.9, 349.6, 336.9 (g/kg DM) (LS) and 12.82, 127.0, 133.7, 117.1 (g/kg DM) (FB) at 110, 130 and $150^{\circ}C$, respectively. These results alone with our previously published reports indicate dry roasting had the differently affected pattern of rumen degradation characteristics of various components in LS and FB. It strongly increased bypass crude protein (BCP) and moderately increased starch (BST) with increasing temperature and time but least affected $^{PSF}OM$. Such desirable degradation patterns in dry roasted LS and FB might be beneficial to the high yielding cows which could use more dry roasted $^{PSF}OM$ as an energy source for microbial protein synthesized in the rumen and absorb more amino acids and glucose in the small intestine.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.3
• /
• pp.431-436
• /
• 2020

Information service organizations that provide science and technology information with a relatively short information life cycle for free or paid are in need of reflecting rapidly changing user needs and behaviors and grafting the latest technologies. The purpose of this study is to derive improvements for each system by comparing and analyzing general recognition of science and technology information users' domestic and foreign science and technology information sites and importance by science and technology information attributes. A total of 816 users of science and technology information participated in the online survey, and the collected data were analyzed by quantitative methods including IPA (Importance Performance Analysis) technique. The importance was evaluated by the impact value calculated through regression analysis. As a result of data analysis, the general recognition of users on science and technology information sites was relatively high in national science and technology information services, and Google Scholar and Science Direct were also high. Google Scholar was found to have more strength than improvement. A better understanding of the user's preferred system is a good driving force for improving the lack of existing systems. It is necessary to improve the information retrieval of the science and technology information service system, that is, to improve the search speed and functions, and also to improve the user interface with improved convenience and usability.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.4
• /
• pp.79-86
• /
• 2016

Physical layer security is cryptography technique to protect information by using physical nature of signals. Currently, many works on physical layer security have been actively researching while those researching models still have some problems to be solved. Eavesdropper does not share its channel state information with legitimate users to hide its presence. And when node transmits signal, hardware impairments are occurred, whereas many current researches assume that node model is ideal node and does not consider hardware impairments. The main features and contributions of this paper to solve these problems are as follows. First, our proposed system model deploys torch node around legitimate user to obtain channel state information of eavesdropper and considers hardware impairments by using channel state information of torch node. Second, we derive closed-form expression of intercept probability for the proposed system model. The results of the performance evaluation through various simulations to find out the effects on proposed system model in physical layer security show that imperfect channel state information does not effect on intercept probability while imperfect node model effects on intercept probability, Ergodic secrecy capacity and secrecy capacity.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.11
• /
• pp.1-9
• /
• 2010

As the process technology scales down, an interconnection has became a major performance constraint for multi-core processors. Recently, in order to mitigate the performance bottleneck of the interconnection for multi-core processors, a 3D integration technique has drawn quite attention. The 3D integrated multi-core processor has advantage for reducing global wire length, resulting in a performance improvement. However, it causes serious thermal problems due to increased power density. For this reason, to design efficient 3D multi-core processors, thermal-aware design techniques should be considered. In this paper, we analyze the temperature on the 3D multi-core processors in function unit level through various experiments. We also present temperature characteristics by varying application features, cooling characteristics, and frequency levels on 3D multi-core processors. According to our experimental results, following two rules should be obeyed for thermal-aware 3D processor design. First, to optimize the thermal profile of cores, the core with higher cooling efficiency should be clocked at a higher frequency. Second, to lower the temperature of cores, a workload with higher thermal impact should be assigned to the core with higher cooling efficiency.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.9
• /
• pp.1-10
• /
• 2011

Unfortunately, in current microprocessors, increasing the frequency causes increased power consumption and reduced reliability whereas it improves the performance. To overcome the power and thermal problems in the singlecore processors, multicore processors has been widely used. For 2D multicore processors, interconnection is regarded as one of the major constraints in performance and power efficiency. To reduce the performance degradation and the power consumption in 2D multicore processors, 3D integrated design technique has been studied by many researchers. Compared to 2D multicore processors, 3D multicore processors get the benefits of performance improvement and reduced power consumption by reducing the wire length significantly. However, 3D multicore processors have serious thermal problems due to high power density, resulting in reliability degradation. Detailed thermal analysis for multicore processors can be useful in designing thermal-aware processors. In this paper, we analyze the impact of workload distribution, distance to the heat sink, and number of stacked dies on the processor temperature. We also analyze the effects of the temperature on overall system performance. Especially, this paper presents the guideline for thermal-aware multicore processor design by analyzing the thermal problems in 2D multicore processors and 3D multicore processors.

• Korean Journal of Applied Biomechanics
• /
• v.21 no.5
• /
• pp.521-528
• /
• 2011

The purpose of this study was to analyze the kinematic characteristics of the finalists in the women's 100 m event to provide important information to coaches and athletes. Three different biomechanics techniques were applied for analyzing sprinter motion: LAVEG, a panning technique, and 12 video cameras for 3 dimensional analysis of the 40 m - 70 m portion of the race. Carmelita Jeter(USA) performed the maximum speed of 10.54 m/s at the distance of 58.2 m. There was a tendency to show a better performance time with a high number of steps (p=.13) and shorter stride length (p=.14) among the 8 sprints. Furthermore, the stride frequency and the performance time were negatively correlated as a higher stride frequency had a positive impact on the performance time (p=.02). Based on 3 dimensional analysis, the 4 top ranked sprinters used the different strategies to maintain a high COM (Center of Mass) velocity during the mid portion of the race (40 m - 70 m). Carmelita Jeter(USA) showed more flexed knee and hip motion at heel contact (HC) to maintain a high COM velocity while S.A. Fraser-Pryce (JAM) showed more extended knee and hip motion at HC. On the other hands, Veronica Campbell-Brown (JAM) and Kelly-Ann Baptiste (TRI) showed a tendency to have high knee lifts during the swing phase to maintain the high COM velocity during the race. These biomechanical analyses of the women's 100 m final event in the 2011 WC, Daegu, will provide important scientific information to coaches and athletes for understanding the sprinting mechanism of today's top-class sprinters.

• Smart Structures and Systems
• /
• v.21 no.5
• /
• pp.687-694
• /
• 2018

The problem of wheel tread defects has become a major challenge for the health management of high-speed rail as a wheel defect with small radius deviation may suffice to give rise to severe damage on both the train bogie components and the track structure when a train runs at high speeds. It is thus highly desirable to detect the defects soon after their occurrences and then conduct wheel turning for the defective wheelsets. Online wheel condition monitoring using wheel impact load detector (WILD) can be an effective solution, since it can assess the wheel condition and detect potential defects during train passage. This study aims to develop an FBG-based track-side wheel condition monitoring method for the detection of wheel tread defects. The track-side sensing system uses two FBG strain gauge arrays mounted on the rail foot, measuring the dynamic strains of the paired rails excited by passing wheelsets. Each FBG array has a length of about 3 m, slightly longer than the wheel circumference to ensure a full coverage for the detection of any potential defect on the tread. A defect detection algorithm is developed for using the online-monitored rail responses to identify the potential wheel tread defects. This algorithm consists of three steps: 1) strain data pre-processing by using a data smoothing technique to remove the trends; 2) diagnosis of novel responses by outlier analysis for the normalized data; and 3) local defect identification by a refined analysis on the novel responses extracted in Step 2. To verify the proposed method, a field test was conducted using a test train incorporating defective wheels. The train ran at different speeds on an instrumented track with the purpose of wheel condition monitoring. By using the proposed method to process the monitoring data, all the defects were identified and the results agreed well with those from the static inspection of the wheelsets in the depot. A comparison is also drawn for the detection accuracy under different running speeds of the test train, and the results show that the proposed method can achieve a satisfactory accuracy in wheel defect detection when the train runs at a speed higher than 30 kph. Some minor defects with a depth of 0.05 mm~0.06 mm are also successfully detected.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.1
• /
• pp.380-386
• /
• 2020

The mobile application market has grown over the past decade since the advent of smartphones, making it the largest market for electronic device software. As competition intensifies in the mobile application market, the impact of application evaluations on the consumption and usage patterns of users has also significantly increased. Therefore, research has been conducted on measures to evaluate mobile applications, but most of the research has relied on qualitative methods such as expert-centered interviews or surveys. In addition, evaluation measures are being constructed from the service provider's perspective, not from the service user's perspective. However, the possibility of application-specific analyses that minimize the subjectivity of researchers is growing, as large amounts of user review data enable quantitative analysis of actual users' assessment of applications. Therefore, this study presents a methodology that can complement current problems with existing quality assessments for mobile applications by utilizing user review data. To this end, the Topic Modeling technique LDA (Latent Dirichlet allocation) is applied in order to elucidate ways to improve existing evaluation measures from a user's perspective. The study is expected to reduce bias in service assessment due to the subjectivity of service providers and researchers as well as provide a measure of assessment by area of mobile applications from a consumer perspective.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.10
• /
• pp.48-54
• /
• 2020

DMSMS (Diminishing Manufacturing Sources and Material Shortage) is increased by developing the scientific technique and downsizing the military part market. DMSMS affects the increase in total life cycle costs and serviceability. Therefore, advance control for parts is important to reduce the cost, and a database is needed to share information on the DMSMS. A task needs to be performed continuously by setting the major control item to management more efficiently. The purpose of this study was to deduce the major control item for the DMSMS management system. Thus, the pre-control item basis of the DAPA (Defense Acquisition Program Administration) Manual and the SD-22 Manual were first selected, and the results of the survey were analyzed by AHP (Analytic Hierarchy Process) method. Fifteen of the detailed items were stratified into three criteria (Impact, Probability, and cost of the DMSMS), and each weight for the items was calculated using a nine-point scale survey. The AHP survey was executed with 25 specialists in the DMSMS management field, and the score of consistency ratio over 0.1 was excluded. The model explained the results and suggested future directions for development.