• Composites Research
• /
• 제35권2호
• /
• pp.75-79
• /
• 2022

본 연구에서는 충격에 의해 파손된 열가소성 유리 섬유 강화 복합재료의 재성형을 통한 물성변화를 조사하였다. 복합재료 시편은 유리섬유 부직포와 폴리프로필렌 필름을 이용하여 핫 프레스 압축 성형 공정을 통해 제작하였다. 총 3번의 낙하 충격 테스트를 진행하였으며, 시편의 물성을 확인하기 위하여 인장시험, 굽힘시험, 낙하충격시험, 시차주사열량계, 주사전자현미경 측정을 진행하였다. 그 결과, 재활용 단계가 반복될수록 결정화도, 인장강도, 탄성계수, 굴곡강도는 증가하였으나 충격특성은 크게 감소하였다.

• 대한기계학회논문집A
• /
• 제36권11호
• /
• pp.1345-1352
• /
• 2012

본 논문의 목적은 사용후핵연료 수송용기 충격완충체의 완충재질로 고려되고 있는 발사목과 우레탄 폼 심재, 그리고 샌드위치 패널에 대한 저속충격거동 및 기계적 특성을 평가하는 것이다. 우레탄 폼은 등방성 재질로써 인장, 압축, 그리고 전단의 기본물성시험을 수행하였으며, 발사목은 서로 다른 직교방향에서 다른 물성을 갖는 이방성 재료이므로 아홉가지 방향에 대한 기계적 특성 평가를 하였다. 충격시험용 심재와 샌드위치 패널 시험편은 충격시험기를 사용하여 세가지 충격에너지 레벨(1J, 3J, 그리고 5J)에 대한 저속충격시험을 수행하였다. 시험 결과, 우레탄 폼과 성장방향을 제외한 발사목은 충격에너지 흡수율, 접촉하중, 그리고 손상영역에서 유사한 거동을 보였으며, 우레탄 폼 심재는 난연성과 비용절약이 우선시 되는 설계에서 완충재질로서 추천될 수 있고, 발사목 심재는 사용후핵연료 수송용기의 경량화를 위한 완충재질로써 우선 고려될 수 있다.

• 한국주조공학회지
• /
• 제39권4호
• /
• pp.61-74
• /
• 2019

The effects of Sr and (Ti-B) additives on the impact and fatigue properties of recycled (35% scrap content) AC4A aluminum alloy are investigated here. The acicular morphology of the eutectic Si phase of as-cast specimens was converted to the fibrous one with Sr additives. The grain size of the α-solid solution decreased by the addition of (Ti-B) additives. The crack initiation energy (E_i) of the impact absorption energy decreased due to the incorporation of an oxide film and inclusions depending on the scrap used. The modification of the eutectic Si morphology by Sr additives is considered as the main factor of the increase of the average impact absorption energy (E_t). The addition of (Ti-B) additives contributed to an increase in the occurrence of crack deflections due to the refining of α-Al grains, resulting in improved fatigue properties.

• 한국농공학회논문집
• /
• 제55권4호
• /
• pp.29-35
• /
• 2013

The objective of the current study is to evaluate the effects depending on the types of reinforcing fibers being influential in view of mechanical properties and impact resistance of hybrid fiber reinforced concrete (HFRC) for applications to precast concrete structure. Hybrid fibers applied therefor were three types such as PP/MSF (polypropylene fiber+macro synthetic fiber), PVA/MAF (polyvinyl alcohol fiber+MSF) and JUTE/MSF (natural jute fiber+MSF), where the volume fraction of PP, PVA and natural jute was applied with 0.2 %, respectively, while based on 0.05 % volume fraction of MSF. The HFRC was tested for slump, compressive strength, flexural strength and impact resistance. The test result demonstrated that mixture of such hybrid fibers improve compressive strength, flexural strength and impact resistance of concrete. Moreover, it was found that HFRCs to which hydrophilic fibers, i.e. PVA/MSF and JUTE/MSF, were mixed show more improved features that HFRC to which non-hydrophilic fiber, i.e. PP/MSF was mixed. Meanwhile, the finding that PVA/MSF HFRC exhibited better performance than JUTE/MSF HFRC was attributed from the former having higher aspect ratio than that of the latter.

• Bulletin of the Korean Chemical Society
• /
• 제33권3호
• /
• pp.855-861
• /
• 2012

A pioneering version of an on-line management system for high-energy molecules (MS-HEMs) was developed by the ADD and BMDRC in Korea. The current system can manage the physicochemical and explosive properties of virtual and existing HEMs. The on-line MS-HEMs consist of three main routines: management, calculation, and search. The management routine contains a user-friendly interface to store and manage molecular structures and other properties of the new HEMs. The calculation routine automatically calculates a number of compositional and topological molecular descriptors when a new HEM is stored in the MS-HEMs. Physical properties, such as the heat of formation and density, can also be calculated using group additivity methods. In addition, the calculation routine for the impact sensitivity can be used to obtain the safety nature of new HEMs. The impact sensitivity was estimated in a knowledge-based manner using in-house neural network code. The search routine enables general users to find an exact HEM and its properties by sketching a 2D chemical structure, or to retrieve HEMs and their properties by giving a range of properties. These on-line MS-HEMs are expected be powerful tool for deriving novel promising HEMs.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 추계 학술논문 발표대회
• /
• pp.30-31
• /
• 2015

High velocity impact of projectile generate local failure such as penetration, scabbing, perforation on concrete. It has been reported that local failure is affected by such as nose shape, mass of projectile. In this study, comparing and weighing the impact failure properties of concrete by high velocity impact test that using spherical nose and flat nose type projectile. As a result, It was considered that scabbing of Flat nose projectile reduced more than spherical nose projectile by dispersion of impact force.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 추계학술발표대회 논문집
• /
• pp.149-152
• /
• 2001

Poly-butylene-terephalate(PBT) can be impact modified by blending with ABS material. The effects of the type of compatibilizer and ABS content on the mechanical properties of PBT/ABS blend were examined in this study. EVA-g-GMA and three type of polycarbonates were used as the compatibilizer. As the GMA content in EVA-g-GMA was increased, the tensile strength of PBT/ABS blend increased and the impact strength of it decreased. With increasing the EVA-g-GMA content in PBT/ABS blend, the tensile strength and impact strength decreased. With PC compatibilizer, the tensile strength of PBT/ABS blend decreased as the ABS content increased. However, the maximum impact strength was observed in 20~30% ABS content range.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1995년도 봄 학술발표회 논문집
• /
• pp.350-354
• /
• 1995

This paper is about impact behavior of cylinder container, made of steel fiber reinforced polymer-impregnated concrete(SFPIC), for intermediate and low level radwaste disposal. In order to obtain the material properties of the SFPIC, steel ball impact tests were done to SFPIC beams and its simulation by finite element method was performed. By using the material properties in finite element impact analysis of the SFPIC concrete cylinder, we obtained impact behavior of the cylinder.

• 대한기계학회논문집A
• /
• 제26권10호
• /
• pp.2165-2171
• /
• 2002

Poly-butylene-terephalate(PBT) can be impact-modified by blending with ABS material. The effects of compatibilizers and ABS content on the mechanical properties of PBT/ABS blend were examined in this study. EPDM-g-GMA and polycarbonate(PC) were used as a compatibilizer. As the GMA content in EPDM-g-GMA increased, the tensile strength of PBT/ABS blend increased and the impact strength decreased. With increasing the EPDM-g-GMA content in PBT/ABS blend, the tensile strength and impact strength decreased. With PC compatibilizer, the particle size of ABS in PBT/ABS blend became smaller than that of the blend without compatibilizer and the particles were more evenly dispersed in matrix. The maximum impact strength of the PBT/ABS blend was observed in the range of 20~30% ABS content.

• 한국안전학회지
• /
• 제16권1호
• /
• pp.43-47
• /
• 2001

Effect of coupling agent on the mechanical properties of PP/GF blend was investigated. The flexural modulus, Izod impact strength, elongation at yield and tensile strength were improved with using coupling agent. Mopological studies revealed that PP and GF were incompatible and addition of coupling agent was very effective to enhance the compatibility, result in mechanical properties.