• Journal of Wind Energy
• /
• v.14 no.3
• /
• pp.69-82
• /
• 2023

Offshore wind farms (OWFs) should be promoted as part of global efforts to respond to climate change, and efforts to preserve biodiversity in terms of climate change adaptation should also be considered. However, the ecological status of marine birds related to OWFs on the Korean Peninsula, such as habitat and reproduction, are not well known. In this study, ecological reasons for the reproductive status of Black-tailed gulls in Korea and representation related to OWFs, the evaluation direction of marine birds related to OWFs was presented. In a review of the techniques for monitoring marine birds, it was confirmed that Korea also needs to provide basic status information on marine birds at the national level. In addition, this study analyzed the reproductive status and related research status of Black-tailed gulls, an important indicator and dominant species on the Korean Peninsula, in relation to marine development projects including OWFs. Furthermore, the direction of environmental impact assessment preparation and impact prediction for various development projects promoted in the ocean, such as OWFs, was considered.

• Journal of Mechanical Science and Technology
• /
• v.17 no.10
• /
• pp.1423-1430
• /
• 2003

In this paper, we develop a real time monitoring system to detect third-party damage on natural gas pipeline. When the damage due to third-party incidents causes an immediate rupture, the developed on-line monitoring system can help reducing the sequences of event at once. Moreover, since many third-party incidents cause damage that does not lead to immediate rupture but can grow with time, the developed on-line monitoring system can execute a significant role in reducing many third-party damage incidents. Also, when the damage is given at a point on natural gas pipeline, the acoustic wave is propagated very fast about 421.3 m/s. Therefore, the data processing time should be very short in order to detect precisely the impact position. Generally, the pipeline is laid under ground or sea and the length is very long. So a wireless data communication method is recommendable and the sensing positions are limited by laid circumstance and setting cost of sensors. The calculation and monitoring software is developed by an algorithm using the propagation speed of acoustic wave and data base system based on wireless communication and DSP systems. The developed monitoring system is examined by field testing at Balan pilot plant, KOGAS being done in order to demonstrate its validity through reactive detection of third-party contact with pipelines. Furthermore, the development system was set at the practical pipelines such as an offshore pipeline between two islands Yul-Do and Youngjong-Do, and a land branch of Pyoungtaek, Korea and it has been operating in real time.

• Journal of Biosystems Engineering
• /
• v.41 no.4
• /
• pp.408-417
• /
• 2016

Purpose: Yield monitoring systems are an essential component of precision agriculture. They indicate the spatial variability of crop yield in fields, and have become an important factor in modern harvesters. The objective of this paper was to review research trends related to yield monitoring sensors for grain crops. Methods: The literature was reviewed for research on the major sensing components of grain yield monitoring systems. These major components included grain flow sensors, moisture content sensors, and cutting width sensors. Sensors were classified by sensing principle and type, and their performance was also reviewed. Results: The main targeted harvesting grain crops were rice, wheat, corn, barley, and grain sorghum. Grain flow sensors were classified into mass flow and volume flow methods. Mass flow sensors were mounted primarily at the clean grain elevator head or under the grain tank, and volume flow sensors were mounted at the head or in the middle of the elevator. Mass flow methods used weighing, force impact, and radiometric approaches, some of which resulted in measurement error levels lower than 5% ($R^2=0.99$). Volume flow methods included paddle wheel type and optical type, and in the best cases produced error levels lower than 3%. Grain moisture content sensing was in many cases achieved using capacitive modules. In some cases, errors were lower than 1%. Cutting width was measured by ultrasonic distance sensors mounted at both sides of the header dividers, and the errors were in some cases lower than 5%. Conclusions: The design and fabrication of an integrated yield monitoring system for a target crop would be affected by the selection of a sensing approach, as well as the layout and mounting of the sensors. For accurate estimation of yield, signal processing and correction measures should be also implemented.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.2
• /
• pp.311-317
• /
• 2014

Buoy has different motion characteristics depends on the sea weather situations. The motion characteristics has an impact on antenna, solar power generation system and etc. installed within a buoy. Therefore, it is important to analyse motion characteristics for management and analyse the buoy conditions. This paper's Buoy motion monitoring system uses gyro sensor to detect motions of a light buoy, and the measured data transfers to the PC on the shore using signal processing algorithm. The aim of this research is to develop monitoring and management mechanism of a buoy by applying motion monitoring system. In this paper, the operation characteristic of movement monitoring system is verified through experiment. Further, in this paper, it can apply such as real-time visibility into the status of the buoy or many ocean facility's motion estimation of the future.

• The Journal of Engineering Geology
• /
• v.29 no.3
• /
• pp.329-337
• /
• 2019

Bottled water companies in Korea are required to conduct an environmental impact assessment of their drinking water supply at least six months before the expiration of their five-year marketing and production license. The water level drawdown, production well water quality, and monitoring well observation results are the most important items that are evaluated in the assessment report. Here we evaluate the relationship between well drawdown and pumping capacity with pumping time from the production wells of bottled water manufacturers located in Cretaceous granite (site A) and Precambrian gneiss (site B). The method to reduce the pumping capacity is more effective in decreasing the drawdown than the method to simultaneously control the pumping and recovery times. Furthermore, the monitoring data from the pH monitoring sensors that were installed in Precambrian gneiss (site C) yield pH values that increase with time and eventually plateau at a certain value. We therefore propose that pH monitoring is either discontinued or improved to provide more reliable and usable results.

• Journal of Drive and Control
• /
• v.21 no.2
• /
• pp.36-43
• /
• 2024

The yield is basic and necessary information in precision agriculture that reduces input resources and enhances productivity. Yield information is important because it can be used to set up farming plans and evaluate farming results. Yield monitoring systems are commercialized in the United States and Japan but not in Korea. Therefore, such a system must be developed. This study was conducted to develop a yield monitoring system that improved performance by correcting a previously developed flow sensor using a grain tank-weighing system. An impact-plated type flow sensor was installed in a grain tank where grains are placed, and grain tank-weighing sensors were installed under the grain tank to estimate the weight of the grain inside the tank. The grain flow rate and grain weight prediction models showed high correlations, with coefficient of determinations (R2) of 0.9979 and 0.9991, respectively. A main controller of the yield monitoring system that calculated the real-time yield using a sensor output value was also developed and installed in a combine harvester. Field tests of the combine harvester yield monitoring system were conducted in a rice paddy field. The developed yield monitoring system showed high accuracy with an error of 0.13%. Therefore, the newly developed yield monitoring system can be used to predict grain weight with high accuracy.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.12
• /
• pp.7025-7039
• /
• 2014

Focal companies (hereafter called buyers) adopt outsourcing practices from a supply chain management strategy to be competitive. Buyers face the bridge transfer after outsourcing contracts, and the monitoring practices would be the only control mechanism left to prevent losing control over the suppliers. This study suggests the set of monitoring practices (i.e., capability, activity and outcome monitoring) as the independent variables to enhance the buyer-supplier collaboration and supplier's performance. In addition the buyer's efforts of monitoring are assumed to influence the buyer's shop floor productivity mediated by the supplier's performance and buyer-supplier collaboration. The results showed that the monitoring practices are meaningful antecedents to the supplier's performance and buyer-supplier collaboration, which fully mediates between the monitoring practices and buyer's shop floor productivity. The mediating role of the buyer-supplier collaboration between activity monitoring and shop floor productive has been rejected, because the negative effect of activity monitoring on buyer-supplier collaboration conflicts with the positive impact of buyer-supplier collaboration on shop floor productive. The theoretical contribution and managerial implications with limitations have been discussed.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.32 no.1
• /
• pp.47-55
• /
• 2012

A structural health monitoring technique for locating impact position in a plate structure is presented in this paper. The method employs a single sensor and spatial focusing of time reversal (TR) acoustics. We first examine the TR focusing effect at the impact position and its surroundings through simulation and experiment. The imaging results of impact points show that the impact source location can be accurately estimated in any position of the plate. Compared to existing techniques for locating impact or acoustic emission source, the proposed method has the benefits of using a single sensor and not requiring material properties and geometry of structures. Furthermore, it does not depend on a particular mode of dispersive Lamb waves that is frequently used in other ultrasonic testings of plate-like structures.

• Journal of environmental and Sanitary engineering
• /
• v.19 no.4 s.54
• /
• pp.34-47
• /
• 2004

Although Environmental Impact Assessment(EIA) in Korea has been improved markedly over the past two decades, by enlarging the range of projects for assessment, instituting pub lic participation and environmental monitoring, and similar measures, it remains deficient in its coverage of human health in Environmental Impact Statements(EISs). Health Impact Assessment(HIA) can supply the necessary correctives. HIA is a combination of procedures, methods and tools by which a policy, programme, projects or legislative procedure may be judged for its potential effects on the health of a population, and the distribution of these effects within it. The principle of health protection is, however, established as a primary concern in EIA processes, in practice health is scarcely mentioned or the discussion is limited to a description of effects through the biophysical environment. The whole range of possible effects on health, including those mediated by socio-economic factors is often ignored, and no effective mechanism are in place to successfully incorporating health criteria and expertise into environmental, assessment(EA) that include ElA, SEA. These are foremost among the current issues facing EIA in Korea.

• Journal of Environmental Impact Assessment
• /
• v.28 no.3
• /
• pp.287-298
• /
• 2019

This study found that wildlife crossing created through environmental impact assessments didn't reduce the number of wildlife accidents on the road by review of "A Study on the Legal and Institutional Review for Reproving Bio-Mobile in Environmental Impact Assessment(2018)". Specific considerations to be reviewed at each stage of the environmental impact assessment consultation were presented for practical site application. Therefore, in this study, the consultation steps for environmental impact assessment were presented in five stages, including planning, design, construction, monitoring, maintenance and management, and detail of the items to be reviewed by public officer. It will be able to prevent loss of habitats and improve biodiversity by improving the practice and institutional problems that were planned and designed at the time of construction.