• 지식경영연구
• /
• 제9권1호
• /
• pp.117-128
• /
• 2008

It is very crucial to establishing an evaluation framework for anayzing the investment effects of IT asset such as knowledge managment systems. However, evaluation by quantitative measures, in spite of its usefulness and reliability, may have weakness in examining wide range of effects of the IT investment. Hence, the purpose of this paper is to propose a novel framework to evaluate the performance in terms of wider range of informatization effects. To do so, knowledge management concepts has been adopted in the evaluation method, and Impact Of Investment(IOI) has been suggested. IOI is used to derive Value Of Investment(VOI) and then ROI.

• 정보관리연구
• /
• 제36권3호
• /
• pp.1-25
• /
• 2005

ISI의 영향계수는 그 범용성에도 불구하고 많은 한계와 가외성을 지니고 있다. 본 연구는 학술지 영향계수의 함의와 가외성을 살펴보고, 국내 대학에서 교수의 연구업적을 평가할 때 학술지에 부여한 점수기준(배점)과 가중치 반영실태를 조사.분석하여 어떤 문제점과 한계가 있는 지를 적시하고, 국내 학술지에 대한 적절한 평가기준을 제안함으로써 ISI 영향계수에 대한 연구업적 평가의 편향성을 극복하는 계기로 삼고자 한다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1995년도 가을 학술발표회 논문집
• /
• pp.164-168
• /
• 1995

As nation's infrastructure is getting old, nondestructive evaluation of existing structures and construction quality control are getting important. In this paper non-destructive evaluations of concrete members using impact echo and SASW methods are introduced. Both techniques are based on the stress wave propagations. Experimental tests were performed using beam type concrete member where voids and cracks are included. Within reasonable accuracy, void locations were detected using impact echo method and the dynamic modulus of concrete were measured using SASW method. Both NDT methods showed a feasibility for the implementation into quality evaluaton of concrete members in practice

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.387-392
• /
• 2004

There has been an increasing demand for the noise impact assessment by the high-speed trains due to the expansion of high-speed rails. This paper provides procedures for the evaluation and the assessment of the potential noise impact resulting from proposed high-speed rails. Firstly the official specifications for the railway noise have been reviewed, and the procedures for the initial noise evaluation and the detailed noise analysis have been described.

• 대한기계학회논문집A
• /
• 제32권8호
• /
• pp.642-653
• /
• 2008

In this paper, we propose a 3-D finite element (FE) analysis model with combined physical behavior and kinematical impact factors for evaluation of residual stress in multi-impact shot peening. The FE model considers both physical behavior of material and characteristics of kinematical impact. The physical parameters include elastic-plastic FE modeling of shot ball, material damping coefficient, dynamic friction coefficient. The kinematical parameters include impact velocity and diameter of shot ball. Multi-impact FE model consists of 3-D symmetry-cell. We can describe a certain repeated area of peened specimen under equibiaxial residual stress by the cell. With the cell model, we investigate the FE peening coverage, dependency on the impact sequence, effect of repeated cycle. The proposed FE model provides converged and unique solution of surface stress, maximum compressive residual stress and deformation depth at four impact positions. Further, in contrast to the rigid and elastic shots, plastically deformable shot produces residual stresses closer to experimental solutions by X-ray diffraction. Consequently, it is confirmed that the FE model with peening factors and plastic shot is valid for multi-shot peening analyses.

• 한국조경학회지
• /
• 제27권4호
• /
• pp.80-86
• /
• 1999

The purpose of this study was to suggest a case study and anlaysis of the visual impact in dam construction through visual impact assessment method in Dong-sang river. The results can be summarized as follows; 1) For the evaluation of the visual impact of dam construction, five steps such as field analysis of visual status, finding visual sensitivity area and visual control point, making visual simulation material and evaluation, and visual impact analysis and assessment were suggested as desirable. 2) In the case study, the visual impact of dam construction was evaluated to be simple, unique, modern, static, cool and unfamiliar. 3) There was a few difference between the pre-construction and post-construction in statistical test. Especially, The dam in Man-Jee area was evaluated to be artificial, unique and destroyed in statistical difference, and then we design dam structure with visual friendliness. 4) In conclusion, there was high correlation between pre-construction landscape and post-construction landscape through semantic differential scale method using eleven adjectives. Therefore, we state that there is no visual impact for the dam construction for the moment.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.917-917
• /
• 2003

The auditory experiments based on the subjective annoyance responses were undertaken for the establishment of the adverb modifiers of the heavy-weight impact noises. The standard heavy weight impact noise, impact ball noise and adult walking noise were recorded by dummy head at a newly-built apartment and were presented to the subjects by headphones. The levels of the three impact noises were varied from 30 to 60㏈(A) and the subjects matched one of the adverb modifiers to each level of the noise sources. As a result, seven scale modifiers were established and the intervals between the modifiers were found as equal. In addition, it was found that the lower annoyance noise limits for the heavyweight impact, impact ball and walking were 40-45㏈ (L$\sub$I, Fmax. AW), which is 6㏈ lower than in the previous study. The background noise level was as low as 21㏈(A) in the test booth, therefore, the testing conditions need to be concerned for evaluation of floor impact noise.

• 한국의류산업학회지
• /
• 제20권5호
• /
• pp.569-582
• /
• 2018

The purpose of this study is to verify the impact protection performance and to evaluate the activity, design, fit, and pad characteristics of the fall impact protection clothing for elderly women. The protective clothing was designed as pants type and underwear type, and an impact protection pad in the form of a tightly connected regular hexagon piece was inserted in the hip and hip joints. The pad was made of two kinds of foam single pad and foam and gel combination pad so that they could be inserted into pants type and underwear type, respectively. The results of the shock absorption performance of the fall impact protective clothing showed that when the impact force of 4601N was applied to the pants type protective clothing, the impact force was reduced by 29% in the foam pad type and 26% in the gel and foam pad type. When the force of 5113N was applied to the underwear type, it decreased by 40% in the foam pad type and by 34% in the gel and foam pad type. As a result of wearing evaluation of subject group, it was found that fit and activity of underwear type was better than that of pants type. Foam pad type was evaluated to be lighter than gel and foam pad type in both the subject and the expert group and the gel and foam pad was evaluated to be more flexible in the expert group.

• 비파괴검사학회지
• /
• 제24권3호
• /
• pp.246-252
• /
• 2004

복합재료는 이방성의 특징으로 매우 복잡한 역학거동을 하며, 해석 및 신뢰성 검사에 많은 어려움이 있다. 특히, 기존의 비파괴검사기법으로 내부손상을 검출하는 것은 매우 어려운 실정이다. 이에 본 연구에서는 복합재구조물의 가장 취약한 분야인 충격에 의한 손상이 발생할 경우 효과적인 검출기법을 개발하고, 충격에 따른 내부결함의 정량평가에 ESPI를 활용하였다. 인공결함을 이용하여 ESPI기법의 신뢰성을 확보하고 실제 충격손상 시험편에 대해 적용하여 5%이내의 오차율로 결함을 정량평가하였다.

• 한국소음진동공학회논문집
• /
• 제14권10호
• /
• pp.945-954
• /
• 2004

Recently, specifications of flat display module is going to be higher definition, brightness and more wide viewing angle. On the other hand, physical thickness of those modules is forced to be slimmer and lighter. The flat display modules such as plasma or TFT-LCD employ thin crystallized panels that are normally weak to high level transient mechanical energy inputs. As a result, anti-shock performance is one of the most important design specifications of TFT-LCD modules. TFT-LCD module manufacturers and their customers like PC or TV makers perform a series of strict impact/drop test for the modules. However most of the large display module designs are generated based on engineer's own trial-error experiences. Those designs may result in disqualification from the drop/impact test during final product evaluation. A rigorous study on the impact failure of the displays is of course necessitated in order to avoid the problems. In this article, a systematic design evaluation is presented with combinations of FEM modeling and testing to support the optimal shock proof display design procedure.