• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 추계학술대회 논문집(I)
• /
• pp.54-59
• /
• 2002

In general, the aluminum extrusions are used to the light construction of the high speed rail vehicle structures. However, the research works ok the crashworthy design of the high speed rail vehicle structures are not published sufficiently because the crash test of high speed rail vehicle structures costs high and is complicated. So, a method that can predict crash characteristics of a large size structure like a high speed tail vehicle should be suggested. In this study, the scale model studies are performed to predict the impact energy absorption characteristics of full scale model. In the first place, we verified the theory of scale law using FE-simulation from the crashworthiness point of view. Secondly, we performed the crush test using scale model, made of aluminum sub structure. As a result, we could predict the crash characteristics using scale model by 10∼20% error.

• 소성∙가공
• /
• 제30권5호
• /
• pp.236-241
• /
• 2021

This study describes the cold stamping process design procedure to secure the formability and dimensional accuracy of the automotive structural component fabricated by 1.5GPa grade ultra-high strength steel sheet. The target product is selected as the front side rear lower member which is the most important energy absorption part in the frontal impact condition. To secure the product quality, an intermediate product shape is added while considering the low elongation and high strength characteristics of 1470Mart. The sequential optimization procedure of the intermediate product shape, the fine dimensional quality is then achieved without any crack or wrinkling. The cold stamping method with ultra-high strength steel sheets is validated by conducting the die tryout of the front side rear lower member.

• 한국수소및신에너지학회논문집
• /
• 제22권2호
• /
• pp.178-183
• /
• 2011

Metal hydride alloys are a promising type of material in hydrogen storage applications, allowing for low-pressure, high-density storage. However, while many studies are being performed on enhancing the hydrogen storage properties of such alloys, there has been little research on large-scale storage vessels which make use of the alloys. In particular, large-scale, high-density storage devices must make allowances for the inevitable generation or absorption of heat during use, which may negatively impact functioning properties of the alloys. In this study, we develop a numerical model of the discharge properties of a high-density MH hydrogen storage device. Discharge behavior for a pilot system is observed in terms of temperature and hydrogen flow rates. These results are then used to build a numerical model and verify its calculated predictions. The proposed model may be applied to scaled-up applications of the device, as well as for analyses to enhance future device designs.

• 센서학회지
• /
• 제28권4호
• /
• pp.236-239
• /
• 2019

In this work, we performed an optical simulation study on the performance of a PMDPP3T:PCBM based on an organic photovoltaic (PV) device. The virtual PV device was developed in Lumerical, finite-difference time-domain (FDTD) solutions. Different layers of the PV cell have been defined through the incorporation of complex refractive index value of those layers' constituent materials. During the simulation study, the effect of the variation active layer thickness on an ideal short circuit current density ($J_{sc,ideal}$) of the PV cell has been, first, observed. Thereafter, we have investigated the impact of surface roughness of a transparent conducting oxide (TCO) electrode on $J_{sc,ideal}$ of the PV cells. From this simulation, it has been observed that the $J_{sc,ideal}$ value of the PV cell is strongly dependent on the thickness of its active layer and the photon absorption of the PV cell has gradually decreased with the increment of the TCO's surface roughness. As a result, the capability of the PV device has been reduced with the increment of the surface roughness of the TCO.

• Advances in nano research
• /
• 제16권4호
• /
• pp.427-434
• /
• 2024

Latest advancement in field of fluid dynamics has taken nanofluid under consideration which shows large thermal conductance and enlarges property of heat transformation in fluids. Motivated by this, the key aim of the current investigation scrutinizes the influence of thermal radiation and magnetohydrodynamic on the laminar flow of an incompressible two-dimensional Williamson nanofluid over an inclined surface in the presence of motile microorganism. In addition, the impact of heat absorption/generation and Arrhenius activation energy is also examined. A mathematical modeled is developed which stimulate the physical flow problem. By using the compatible similarities, we transfer the governing PDEs into ODEs. The analytic approach based on Homotopy analysis method is introduced to impose the analytic solution by using Mathematica software. The impacts of distinct pertinent variable on velocity profiles are investigated through graphs.

• 토지주택연구
• /
• 제15권3호
• /
• pp.189-198
• /
• 2024

본 연구는 펄라이트와 EPS Beads를 활용한 단열 콘크리트의 열전도율과 구조적 특성을 분석하고, 물 흡수와 단열 성능 간의 상관관계를 규명하였다. 실험 결과, EPS Beads의 함유량이 4.2%일 때 가장 낮은 열전도율을 나타냈으며, 펄라이트의 함유량 증가에도 불구하고 열전도율의 변화가 나타나지 않았음을 확인하였다. 또한, 단열 콘크리트의 물 흡수를 최소화하는 것이 단열 성능 향상에 중요한 요소임을 발견하였으며, 이를 통해 도시의 탄소 중립 실현에 기여할 수 있음을 제시하였다. 이 연구는 지속 가능한 건축 재료 개발과 에너지 효율 향상에 기여할 수 있는 중요한 시사점을 제공한다.

• 한국방재학회 논문집
• /
• 제9권2호
• /
• pp.23-30
• /
• 2009

충격흡수시설은 주행차로를 벗어난 차량이 도로상의 고정된 구조물과의 직접적인 충돌을 방지하도록 하기 위한 보호시설이다. 이러한 기능은 충돌차량이 안전하게 점진적으로 멈추도록 속도를 감소시킴으로써 이루어진다. 기존의 일반적인 충격흡수시설에는 이러한 기능을 수행하기 위해서 다음의 두 가지 개념 중 하나가 적용된다. 첫 번째 개념은 파괴 또는 소성변형이 가능한 재료에 의해 충돌차량의 운동에너지를 흡수하는 것이고, 두 번째 개념은 충돌차량의 운동량을 차량의 이동경로에 놓인 소모성 재료의 질량체에 전달하는 것이다. 일반적으로 첫 번째 개념을 이용한 충격흡수시설은 압축(비관성) 충격흡수시설로 분류되고, 두 번째 개념을 이용한 충격흡수시설은 관성 충격흡수시설로 분류된다. 본 논문의 목적은 위에서 언급한 두 가지 개념을 동시에 적용한 압축형 충격흡수시설의 개발이다. 실물차량 충돌시험을 최소화 할 수 있도록 관성 에너지와 마찰 에너지 소산을 고려한 예비설계 가이드를 수립하고 충격흡수시설 개발을 위한 컴퓨터 시뮬레이션을 수행하였다. 시뮬레이션을 위하여 도로안전시설물 해석에 가장 많이 사용되는 LS-DYNA를 이용하였다. 개발된 충격흡수시설은 국내지침 CC2급의 다양한 충돌조건에 대한 성능 평가 기준을 만족하였다.

• 대한기계학회논문집A
• /
• 제38권9호
• /
• pp.959-965
• /
• 2014

본 연구에서는 Al/CFRP 혼성 구조부재가 승용차용 사이드부재에 사용될 것을 상정하여 Al/CFRP 혼성 구조부재의 단면형상의 변화, 최외각층의 변화가 압궤 특성에 어떠한 영향을 미치는가를 실험적으로 고찰하여 수송기계의 경량화를 위한 사이드부재로 사용될 수 있는 설계 데이터를 얻고자 하였다. 실험결과 다음과 같은 결론을 얻었다. 최외층각이 $0^{\circ}$로 적층된 원형 Al/CFRP 혼성 충격 흡수부재가 사각 Al/CFRP 혼성 충격 흡수부재 보다 52,9%, 모자형 Al/CFRP 혼성 충격 흡수부재 보다 49.93% 높게 나타났으며, 최외층각이 $90^{\circ}$로 적층된 경우 원형 Al/CFRP 혼성 충격 흡수부재 사각 Al/CFRP 혼성 충격 흡수부재 보다 50.49%, 모자형 Al/CFRP 혼성 충격 흡수부재 보다 49.2% 높게 나타났다.

• 한국산학기술학회논문지
• /
• 제13권5호
• /
• pp.1939-1946
• /
• 2012

교량용 고성능 강재는 높은 인장강도, 항복강도, 고인성, 용접성등이 요구된다. 교량 구조용 강재인 TMCP HSB600강의 GMA용접부에서 입열량(1.4~3.2kJ/mm)과 용접후 열처리가 기계적 특성과 미세조직에 미치는 영향을 조사하였다. 용접된 상태에서는 입열량이 증가할수록 인장강도와 경도는 감소하였다. 입열량 1.4kJ/mm에서는 빠른 냉각 속도에 의해 베나이트적 페라이트와 탄화물 집합체 등의 경한 미세조직이 생성되었고 입열량 2.1kJ/mm에서는 침상형 페라이트가 다량 생성되었으며, 고입열량인 3.2kJ/mm에서는 입계페라이트 사이트 플레이트와 구형 페라이트가 많이 생성되었다. 용접 후 열처리를 통해 용접부의 잔류응력의 감소와 결정립 조대화로 인하여 인장강도와 경도는 감소하였으나 충격흡수에너지에는 큰 차이가 없었다.

• Structural Engineering and Mechanics
• /
• 제90권4호
• /
• pp.371-390
• /
• 2024

Investigating the impact of openings on the structural behavior of ferrocement I-beams with two distinct types of reinforcing metallic and non-metallic meshes is the primary goal of the current study. Up until failure, eight 250x200x2200 mm reinforced concrete I-beams were tested under flexural loadings. Depending on the kind of meshes used for reinforcement, the beams are split into two series. A control I-beam with no openings and three beams with one, two, and three openings, respectively, are found in each series. The two series are reinforced with three layers of welded steel meshes and two layers of tensar meshes, respectively, in order to maintain a constant reinforcement ratio. Structural parameters of investigated beams, including first crack, ultimate load, deflection, ductility index, energy absorption, strain characteristics, crack pattern, and failure mode were reported. The number of mesh layers, the volume fraction of reinforcement, and the kind of reinforcing materials are the primary factors that vary. This article presents the outcomes of a study that examined the experimental and numerical performance of ferrocement reinforced concrete I-beams with and without openings reinforced with welded steel mesh and tensar mesh separately. Utilizing ANSYS-16.0 software, nonlinear finite element analysis (NLFEA) was applied to illustrate how composite RC I-beams with openings behaved. In addition, a parametric study is conducted to explore the variables that can most significantly impact the mechanical behavior of the proposed model, such as the number of openings. The FE simulations produced an acceptable degree of experimental value estimation, as demonstrated by the obtained experimental and numerical results. It is also noteworthy to demonstrate that the strength gained by specimens without openings reinforced with tensar meshes was, on average, 22% less than that of specimens reinforced with welded steel meshes. For specimens with openings, this value is become on average 10%.