• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 봄 학술발표회 논문집
• /
• pp.315-322
• /
• 1997

This paper describes an experimental study on the seawater resistance of steel fiber reinforced concrete. The test method adopted for this study may be devided into long-term immersion test and accelerated test by wetting and drying. Test were carried out to evaluate the procedure in which reduction in dynamic modulus, length change and compressive strength to nine months were measured. Resistance indicators are the water - cement ratio, the content of steel fiber, the immersion water(artificial seawater or freshwater). The conditions of intervals of immersing in artificial seawater and drying, low water-cement ratio, and non-steel fiber became most deteriorated.

• 한국의류산업학회지
• /
• 제12권3호
• /
• pp.327-337
• /
• 2010

The current study investigates e-CRM, Shopping-mall Image, Perceived Value, Immersion, Satisfaction, Purchase Intention in the Fashion e-Commerce. The e-CRM(Customer Relationship Management) was applied to see the effect on the relation quality toward the fashion shopping-mall via relation performance. To fulfill the study objectives, a total of 521 questionnaires(Korean 278 vs, American 243) were conducted to the customers with first-hand experience with fashion merchandise in Internet shopping-mall. The judgement sampling method was employed on sample population ages from 20s to 40s over two month period. The result showed that purchase intention of an individual differs by consumer type and different factors affect purchase intention of the fashion merchandise for each consumer type.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.956-960
• /
• 2004

Effects of ion implantation and deposition on the tribological properties of DLC film as a function of implanted energies and process times were investigated. TiC ions were implanted and deposited on the Si-wafer substrates followed by DLC coating using ion beam deposition method. In order to study tribological properties such as friction coefficient and behavior of DLC film on the modified surface as a function of implanted energies and process times, we used a ball-on-disc type apparatus in the atmospheric environment. From results of wear test, as the implanted energy was increased, the friction coefficient was more stable below 0.1.

• 대한간호학회지
• /
• 제34권1호
• /
• pp.15-24
• /
• 2004

Purpose: The purpose of this research was to explore the cyber world immersion experience of adolescents. Method: Multiple strategies for data collecting were used: an in depth face-to-face interview; analysis of adolescent' writings; and analysis of examples of phenomenon in the realistic world. The sample group consisted of 10 adolescents. Results: Although the experience was different for all adolescent interviewed, the essential themes of experience emerged: "fill up", "homoeologous feeling", "the older generation has a conflicting negative opinion", "change in social character", "become habitually skeptic", "have bad health", "mean of superiority and getting everything solved", "ease of access", "monetary benefit", "addiction to the computer", "forget real life solved stress", "do harm to society", "take comfort", or "new job". Conclusion: Accordingly this paper suggests that contact with various software is necessary in adolescents, and good quality contents function to prepare and activate adolescents to apply the internet for good use.

• Journal of the Optical Society of Korea
• /
• 제15권1호
• /
• pp.9-14
• /
• 2011

In this study, the internal structure of an optical waveguide embedded in a flexible optical circuit board is observed with a confocal microscope. In order to increase the light reflection from an internal material interface with a very small index difference, and thus enhance the signal contrast, a theta microscopy scheme has been integrated into a conventional confocal microscope, and a high NA oil-immersion lens has been used. The interface reflectivity is increased from roughly 0.0015% to 0.025% by the proposed method, and the internal structure can thus be successfully measured.

• Applied Microscopy
• /
• 제52권
• /
• pp.4.1-4.11
• /
• 2022

Field emission scanning electron microscopy (FESEM) is an essential tool for observing surface details of specimens in a high vacuum. A series of specimen procedures precludes the observations of living organisms, resulting in artifacts. To overcome these problems, Takahiko Hariyama and his colleagues proposed the concept of the "nanosuit" later referred to as "NanoSuit", describing a thin polymer layer placed on organisms to protect them in a high vacuum in 2013. The NanoSuit is formed rapidly by (i) electron beam irradiation, (ii) plasma irradiation, (iii) Tween 20 solution immersion, and (iv) surface shield enhancer (SSE) solution immersion. Without chemical fixation and metal coating, the NanoSuit-formed specimens allowed structural preservation and accurate element detection of insulating, wet specimens at high spatial resolution. NanoSuit-formed larvae were able to resume normal growth following FESEM observation. The method has been employed to observe unfixed and uncoated bacteria, multicellular organisms, and paraffin sections. These results suggest that the NanoSuit can be applied to prolong life in vacuo and overcome the limit of dead imaging of electron microscopy.

• 대한수학회보
• /
• 제39권2호
• /
• pp.237-249
• /
• 2002

We study nondegenerate immersions of Riemannian manifolds of constant sectional curvatures into Lorentzian manifolds of the same constant sectional curvatures with flat normal bundles. We also give a method to produce such immersions using the so-called Grassmannian system. .

• 대한수학회논문집
• /
• 제17권1호
• /
• pp.57-69
• /
• 2002

We study a unifying method to obtain nondegenerate isometric immersions of manifolds of constant sectional curvatures c with flat normal bundles into the space forms of curvature c for c= -1,0,1.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1993년도 춘계학술발표회
• /
• pp.95-97
• /
• 1993

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.325-330
• /
• 2004

Recently, the request for the high strength of material is more and more increased in the area of industrial environment and machinery. To accomplish the high strength of materials, carbonizing treatment, nitrifying treatment, shot-peening method are representatively applied, however, shot-peening method is generally used among the surface processes. Shot peening is a cold working process used to impact Compressive residual stressed in the exposed surface layers. Benefits due to shot peening are increase in resistance to fatigue, stress corrosion cracking, fretting, galling, erosion and closing of pores. In this study, the influence of shot peening on the corrosion was investigated on spring steel immersed in 3.5% NaCl. The immersion test as performed on the two kinds of specimens. Corrsion potential, polarization curve, residual stress and etc, were investigated from experiment results. From test result the effect of shot peening on the corrosion was evaluated. The important results of the experimental study on the effects of shot peened on the environment corrosion of spring steels are as follows; In case of corrosion potential, shot peened specimen shows more activated negative direction as compared with parent mental. Surface of specimen, which is treated with the shot peened is placed as more activated state against inner base metal. It can cause t도 anti-corrosion effect on the base metal.