저가습 작동을 위한 수소 이온 교환막 연료전지용 $Nafion/TiO_2$ 복합막을 졸-겔 법을 이용하여 제조하였다. 이때 Nafion막에 $TiO_2$ 나노 입자를 함침시키기 위하여 $TiO_2$ 전구체 용액에 1일부터 7일까지 함침 시간을 달리하여 복합막을 제조하였다. 담금 시간이 증가할수록 Nafion막 내에 함침되는 $TiO_2$ 함량이 증가하였다. $TiO_2$ 함량이 증가함에 따라 막의 표면의 친수성이 증가하면서 접촉각은 감소하는 것을 보여주었다. 물 흡수력(water uptake)과 복합막을 통한 수소 이온 전도도는 담금 시간이 4일인 경우 가장 높게 나타났고 4일 이상인 경우에는 오히려 감소하는 경향을 보여주었다. 담금 시간이 7일인 경우에는 큰 $TiO_2$ 입자들이 막의 표면과 내부에 생성되어 애노드에서 캐소드로의 수소 이온 전도를 방해하게 되는 결과를 초래하였다. 전지 성능 시험 결과 물 흡수력 및 수소 이온 전도도의 결과와 상당히 일치하는 것을 보여주었다. 즉, 0.6 V에서 담금 시간이 1일, 3일, 4일 및 7일인 경우 전류 밀도가 상대 습도(relative humidity, RH) 40%에서 각각 0.54, 0.6, $0.63A/cm^2$ 및 $0.49A/cm^2$를 나타내었다. Nafion 분산액과 $TiO_2$ 입자를 혼합하여 제작한 막과 Nafion 115를 이용하여 RH 40%에서 수행한 전지 성능 결과와 비교할 때 졸-겔 법을 이용하여 제조한 복합막의 경우 약 66%의 전지 성능 향상을 얻을 수 있었다.
This paper deals with an economic evaluation of domestic immersing type photoelectrochemical hydrogen production. We also make some sensitivity analysis of hydrogen production prices by changing the values of input factors such as the initial capital cost, the solar to hydrogen conversion efficiency, and the system duration time. The hydrogen production price of the immersing type photoelectrochemical system was estimated as 8,264,324 won/$kgH_2$. It is expected that the production cost by photoelectrochemical hydrogen production can be reduced to 26,961 won/$kgH_2$ if the solar to hydrogen conversion efficiency is increased to 14%, the system duration time is increased to 20,000 hours, and the initial capital cost is decreased to 10% of the current level. The photoelectrochemical hydrogen production is evaluated as uneconomical at this time, and we need to enhance the solar to hydrogen conversion efficiency and the system duration time as well as to reduce prices of the system facilities.
Bending fracture strength test and impact strength test were made for VC coated die steels treated by immersing in molten borax bath and for hardened steels which were quenched and tempered, in order to clarify the effect of VC coating at $1000^{\circ}C$. The material used in this investigation was representative cold and hot work die steels STD11, STD61. The results obtained are as follows. 1) The bending fracture strength of VC coated die steel (STD11, STD61) was lessened with increasing the thickness of the VC coated layer. 2) With increasing the immersing time (imcreasing the thickness of the VC coated layer) the maximum hardness was obtained at 480 minutes holding, after that holding time hardness was decreased. 3) The impact strength of the VC coated die steel was not decreased. In the casse of STD11, it was higher than that of the quenched condition especially at low tempering temperature, and vice versa at high tempering temperature. However in the case of STD61 shows the result to the contrary.
본 연구는 보존화의 가공기술을 개발하기 위해서 화훼장식용으로 많이 사용하는 카네이션(Dianthus caryophyllus) 'Desio' 꽃잎으로 에탄올 용액과 글리세린에 의한 최적 처리조건을 구명하고자 수행되었다. 이를 위해 에탄올 침지시간과 글리세린 처리 농도 및 침지시간이 보존화 품질에 미치는 효과를 평가하였다. 에탄올을 이용한 탈수 및 탈색처리 효과는 꽃잎의 탈색이 완전히 이루어져 명도가 가장 높고, 채도가 낮은 24~48시간에서 적절하였다. 글리세린의 적정처리 농도는 30%에서 36시간 처리구의 먼셀값이 H값 4.0R, V값 6.49, 채도를 나타내는 C값은 19.8로 신선한 꽃잎과 가장 유사하게 나타났다. 건조 후 무게 변화에 있어서는 침지 시간이 길어지고 글리세린 농도가 높아짐에 따라 감소율은 줄어드는 경향을 나타내었다. 12시간 침지 후 무게 변화는 글리세린 무처리구에서 시간에 따라 86~90%까지 감소한 반면, 40%로 농도가 높을수록 51~69% 감소하였고, 48시간 침지 후의 변화에서는 글리세린 무처리구에서 건조시간에 관계없이 90% 감소에 비하여 글리세린 40%에서는 46~54%로 감소율이 1/2 줄어든 것으로 나타났다. 건조 소요시간은 글리세린 10~20% 농도에서는 글리세린 침지 6시간을 제외하고 모두 24시간이 소요되었고, 30~40%, 12시간 침지부터는 48시간이 소요되어 농도가 높고 침지시간이 길수록 건조시간이 길어짐을 알 수 있었다.
It was reported in our Previous paper that the fermented products from Gloeostereum incarnatum strongly inhibit the growth of six kinds of bacteria in human bodies. In this paper the appropriated conditions of immersing culture for the strain 8 903 of Gloeostereum incarnatum was analysed. And the output of the hypha and fermentative product was determined or compared. The prelimenaryresults showed that the appropriated conditions for the growth of Gloeostereum incarnatum are: (1)culture medium:glucose 3%; protein peoptne 0.2%; soybeancake power 1% yeast power 0.3%; KH2PO40.05%; MgSO4 0.03%; CaCO3 0.01%; vitamin Bl 0.001%; befor sterilization pH Value of six should be maintained; (2) temperature; 27f ~28f ; (3) time; about 200 hours; (4) ventilation; (30%∼50%)/min. The sigh of the end culture are: pH coming down about 4: remnant glucoses less 1%; amino nitrogens about 20%; time about eight days. In the aforementioned conditions, the output of fermentative product achieve to 2.5∼3g/L.
It was reported in our Previous paper that the fermented products from Gloeostereum incarnatum strongly inhibit the growth of six kinds of bacteria in human bodies. In this paper the appropriated conditions of immersing culture for the strain 8 903 of Gloeostereum incarnatum was analysed. And the output of the hypha and fermentative product was determined or compared, The prelimenaryresults showed that the appropriated conditions for the growth of Gloeostereum incarnatum are: (1)culture medium:glucose 3%; protein peoptne 0.2%; soybeancake power 1%, yeast power 0.3%; KH2PO40.05%; MgSO4 0.03%; CaCO3 0.01%; vitamin Bl 0.001%; befor sterilization pH Value of six should be maintained; (2) temperature; 27$^{\circ}C$~28$^{\circ}C$; (3) time; about 200 hours; (4) ventilation; (30%~50%)/min. The sigh of the end culture we: pH coming down about 4: remnant glucoses less 1%, amino nitrogens about 20;, time about eight days. In the aforementioned conditions, the output of fermentative product achieve to 2.5 ~3g/L.
This pilot study evaluated fueling feasibility of sewage sludge, which contains a large amount of water content, by applying melting of thermoplastic polyethylene (PE). This study has identified a simultaneous achievement of drying and heating value improvement of the sewage sludge. The sewage sludge collected from a sewage sludge treatment plant during a winter period had a water content of 83.7 wt%, a combustible volatile content of 12.5 wt%, and an ash content of 3.8 wt%. The higher heating value (HHV) of the dried sewage sludge, before impregnation or coating of PE, was 4,600 kcal/kg. The collected sewage sludge was immersed into the melted PE solution, which had a HHV of 11,070 kcal/kg, and kept immersing with increasing reaction time. As the reaction (immersing or coating or impregnation) time increased, the water content of the sludge decreased. However, the HHV of the sludge increased with increasing the reaction time. The HHVs of the sewage sludge immersed or dipped into the melted PE solution for 15 min ranged from 6,780 to 8,170 kcal/kg with water content less than 7 wt%. This result indicates the melted PE solution can be utilized as an improvement technology for dryness and heating value of the sewage sludge with high water content. The sewage sludge impregnated or coated with melted PE can be utilized as potential fuel or energy resources.
Polyaniline(PAn)-nylon 6 composite fabrics were prepared by immersing the nylon 6 fabrics in 100% distilled aniline for specified diffusion time and drawn out. Then the excess aniline on the fabric surface was blotted and successive polymerization was initiate by immersing them into oxidant and dopant solution for in situ polymerization of polyaniline. Consequently highly conductive PAn-nylon 6 composite fabrics could be obtained and the conductivity reaches as high as 10-2 S/cm. The maximum conductivity was obtained when the fabric was immersed in 100% aniline at 4$0^{\circ}C$ for 3hours and polymerization was proceeded in 0.25M ammonium peroxydisulfate solution at 5$^{\circ}C$ for 1hour.
본 연구의 목적은 초등학교 저학년 아동의 게임이용 실태를 살펴보고, 학년에 따라 게임몰입에 차이가 있는지, 그리고 게임이용 실태가 게임몰입에 영향을 주는지 알아봄으로서 아동의 컴퓨터게임관련 연구의 기초자료로 활용하는데 있다. 연구대상은 부산에 소재한 한 초등학교 1학년부터 3학년 아동 총 239명으로, 컴퓨터 게임 사용 실태 조사 설문지와 컴퓨터게임 몰입 검사지를 배부하여 자료처리를 하였다. 게임이용 실태를 살펴보면, 1학년 아동의 게임 경력, 게임시간, 주간게임 횟수 등에서 3학년 아동과 비슷하거나 더 많은 것으로 나타났다. 게임몰입경향의 학년별 차이는 나타나지 않았으나 성별차이는 나타났다. 또한 컴퓨터게임 실태조사 항목인 게임경력, 주당 게임횟수, 1회당 게임시간, 게임 이유 등이 게임몰입에 모두 유의미한 영향을 주는 것으로 나타났다. 마지막으로, 연구결과에 대한 논의와 후속연구가 제안되었다.
Objectives : Corydalis tuber has been used for promoting blood circulation and for relieving pain in Oriental medicine. In the present study, we focused on the antimicrobial activity of Corydalis tuber and compared its antimicrobial activity with the processed Corydalis tuber. Methods : Processing of Corydalis tuber was accomplished by immersing in 5% of acetic acid for 12 h and then by roasting at $250^{\circ}C$ for indicated time periods(0-30 min). Minimum inhibitory concentration(MIC) and the zone of growth inhibition were determined against Propionibacterium acnes(P. acnes). Results : The methanolic extracts of Corydalis tuber showed potent antimicrobial effect(MIC 62.5 ${\mu}g/ml$). Its alkaloidal component, dehydrocorydaline, also exhibited antibacterial activity(MIC 25.0 ${\mu}g/ml$). After processing of Corydalis tuber, its inhibitory effect on the growth of P. acnes was significantly enhanced compared with that of unprocessed Corydalis tuber. Furthermore, elevated content of dehydrocorydaline was found in the processed than the unprocessed Corydalis tuber. However, the different roasting minutes effected on antimicrobial activity. The best roasting time of Corydalis tuber was 10 min, while roasting for the time above 15 min resulted in diminishing antimicrobial activity. Thus, it was concluded that the standardized processing condition of Corydalis tuber should be established to obtain enhanced antimicrobial(P. acnes) activity. Conclusion : For antimicrobial effect against P. acnes, the best processing condition of Corydalis tuber is immersing in 5% of acetic acid for 12 h and by roasting at $250^{\circ}C$ for 10 min.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.