• Journal of Magnetics
• /
• v.18 no.2
• /
• pp.111-116
• /
• 2013

This paper presents a characteristic analysis method of a permanent magnet type transverse flux linear motor (TFLM) with spiral cores. The spiral cores are used as the mover cores in order to make 3-dimensional (3-D) magnetic flux paths at the TFLM which have 3-D magnetic flux flows. The 3-D Equivalent Magnetic Circuit Network Method is used to analyse the magnetic characteristics of the machine, and an imaginary part, 'flux barrier,' is introduced to consider the spiral core characteristic. Magnetic parameters such as flux, inductance, and thrust are calculated from the analysis results. The computed thrust forces are compared to measured values to confirm the accuracy of the analysis.

• Journal of Ocean Engineering and Technology
• /
• v.8 no.2
• /
• pp.80-92
• /
• 1994

The dynamic response characteristics of a floating ocean city are examined for presenting the basic data for the design of huge offshore structures supported by a large number of floating bodies in waves. The numerical approach which is accurate in linear system is based on combination of a three dimensional source distribution method, wave interaction theory and the finite element method of using the space frame element. The hydrodynamic interactions among the floating bodies are taken into account in their exact form within the context of linear potential theory in the motion and structural analysis. The method is applicable to an arbitrary number of three dimensional bodies having any individual body geometries and geometrical arrangement with the restriction that the circumscribed, bottom-mounted. Imaginary vertical cylinder for each body does not contain any part of the other body. The validity of this procedure was verified by comparing with experimental results obtained in the literature.

• Journal of Power System Engineering
• /
• v.15 no.5
• /
• pp.54-60
• /
• 2011

In this study, an analytical realization of end-milling system was introduced using recursive parametric modeling analysis. Also, the numerical mode analysis of end-milling system with different conditions was performed systematically. In this regard, a recursive least square(RLS) modeling algorithm and the natural mode for real part and imaginary one was discussed. This recursive approach (RLSM) can be adopted for the on-line system identification and monitoring of an end-milling for this purpose. After experimental practice of the end-milling, the end-milling force was obtained and it was used for the calculation of FRF(Frequency response function) and mode analysis. Also the FRF was analysed for the prediction of a end-milling system using recursive algorithm.

• Journal of the Korean Society of Mechanical Technology
• /
• v.13 no.3
• /
• pp.73-79
• /
• 2011

In this study, an analytical realization of end-milling system was introduced using recursive parametric modeling analysis. Also, the numerical mode analysis of end-milling system with different conditions was performed systematically. In this regard, a recursive least square modelling algorithm and the natural mode for real part and imaginary one was discussed. This recursive approach (RLSM) can be adopted for on-line end-milling identification. After experimental practice of the end-milling, the end-milling force was obtained and it was used for the calculation of FRF (Frequency response function) and mode analysis. Also the FRF was analysed for the prediction of a end-milling system using recursive algorithm.

• Bulletin of the Korean Chemical Society
• /
• v.17 no.8
• /
• pp.707-712
• /
• 1996

Growth and changes of electronically conducting polypyrrole (PPy) in the form of thin films polymerized on metal electrodes were investigated by electrochemical and in situ three-parameter ellipsometry methods at the wavelength of 632.8 nm. Although the optical equations produced multiple sets of solution, it was possible to determine a unique set of thickness and the optical constants of a film by auxiliary measurements and/or physical reasoning. The changes in the thickness and the optical properties of the polymers during polymerization and electrochemical oxidation/reduction was successfully followed by the three-parameter ellipsometric technique. The optical properties of the polymers continuously changed as the film grew. The imaginary part of the refractive index of polypyrrole seemed to be dominantly determined by the existence of an absorption band around the visible range.

• The Journal of the Korea Contents Association
• /
• v.7 no.4
• /
• pp.141-149
• /
• 2007

In this study, the use of abstraction has been considered, focusing on the abstract metaphoric expressions presented in Animatrix and it has a purpose as the case study in the use of abstraction as a unique element of animation in which imaginative ideas and stimuli are significantly important and the pioneering works of abstract animations were produced in the early 20th century. The abstract metaphors expressed in The Second Renaissance Part1 & Part2 and Matriculated among the episodes of Animatrix, the animation produced in the omnibus form directed by Wachowski Brothers and great Master in the world, can be analyzed into Anima of Abstraction abstractively expressing organic vital power, Extensity of Abstraction which 4D space is realized possibly recognizing the human emotions as well as 3D space, and Conceptualization of Abstraction directly presenting the human mentality and imaginary world.

• Journal of the Korean Magnetics Society
• /
• v.17 no.5
• /
• pp.198-204
• /
• 2007

The effects of annealing temperature on electromagnetic wave absorption characteristics in $Fe_{73.5}Cu_1Nb_3Si_{15.5}B_7$ (at%) alloy flakes/polymer composite sheets available for quasi-microwave band have been investigated. The composite sheet including the magnetic flakes annealed at $425{\sim}475^{\circ}C$ for 1 h exhibited highest power loss in the GHz frequency range as compared with the sheets composed of the alloy flakes annealed at higher temperature than $475^{\circ}C$ or in as-milled state. Moreover the imaginary part of complex permeability had largest value in the GHz frequency range for the sheets including the flakes annealed at $425{\sim}475^{\circ}C$. The large value of power loss of the sheets including the magnetic flakes annealed at $425{\sim}475^{\circ}C$ was attributed to the high imaginary part of the complex permeability. However, because of its large transmission parameter $S_{21}$, the composite sheet having the magnetic flakes annealed at $525^{\circ}C$ showed low power loss.

• Environmental and Resource Economics Review
• /
• v.23 no.4
• /
• pp.719-746
• /
• 2014

This study attempts to estimate the value of the water quality improvement by deriving the equilibrium price of the water pollutant emission permit for the imaginary water pollutant emission trading market. It is reasonable to say that there is already an implicit social agreement for the unit value of water pollutant, when the government set the Total Water Pollutant Loading System for the major river basin as a part of the Comprehensive Measures for Water Management, particularly for the Nakdong River Basin. Therefore, we can derive the unit value of water pollutant emission, which is already implied in the pollution allowance for each city or county by the Total Water Pollutant Loading System. Once estimated, it will be useful to the economic assessment of the water quality related projects. An imaginary water pollutant emission trading system for the Nakdong River Basin, where Total Water Pollutant Loading System is already effective, is constructed for the estimation of the equilibrium price of water pollutant permit. By estimating marginal abatement cost curve or each city or county, we can compute the equilibrium price of the permit and then it is regarded as the economic value of the water pollutant. The marginal net benefit function results from the relationship between the emission and the benefit, and then the equilibrium price of permit comes from constructing the excess demand function of the permit by using the total allowable permit of the local government entity. The equilibrium price of the permit would be estimated to be $1,409.3won/kg{\cdot}BOD$. This is within reasonable boundary compared for the permit price compared to foreign example. This permit price would be applied to calculate for the economic value of the water quality pollutants, and also be expected to use directly for the B/C analysis of the business involved with water quality change.

• Journal of Navigation and Port Research
• /
• v.32 no.5
• /
• pp.363-368
• /
• 2008

This paper presents a miniaturization design technique of radio frequency identification (RFID) tag antenna operated in 910 MHz band. Miniaturization structure design for a tag antenna is performed by structure application of the folded dipole and meander line. In order to realize the maximum power transmission, imaginary part of a chip impedance and a tag antenna impedance is matched by complex conjugate number. The optimized tag antenna size is $50\;nm\;{\times}\;40\;nm\;{\times}\;1.6\;nm$ and its size is reduced about 62 % comparison with antenna size of reference [4]. The measured results of fabricated tag antenna are confirmed the reasonable agreement with prediction. The read range of the tag antenna with chip observed about 5 m.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.10a
• /
• pp.389-394
• /
• 2005

In this study we carried out to evaluate the salinity concentration and volumetric water content of unsaturated soil column using frequency domain Reflectometry with vector network analyzer (FDR-V) measurement system. All of experiments were considered to the effect of temperature which ranges from l0$^{\circ}C$ to 50$^{\circ}C$ increasing the interval of l0$^{\circ}C$ controlled by the constant temperature container. From the results the responses of complex dielectric constant which consist of the real part and imaginary parts have the effect of volumetric water content and concentration of salinity at 1GHz. Use of derived equations (1) and (2) can be calculated the physical parameters such as volumetric water content and salinity concentration of unsaturated media by the responses of complex dielectric constant.