• 반도체디스플레이기술학회지
• /
• 제19권4호
• /
• pp.71-76
• /
• 2020

In this paper, we propose a super-resolution method that reconstructs compressed low-resolution images into high-resolution images. We propose a CNN model with a small number of parameters, and even if quantization is applied to the proposed model, super-resolution can be implemented without deteriorating the image quality. To further improve the quality of the compressed low-resolution image, a new degradation model was proposed instead of the existing bicubic degradation model. The proposed degradation model is used only in the training process and can be applied by changing only the parameter values to the original CNN model. In the super-resolution image applying the proposed degradation model, visual artifacts caused by image compression were effectively removed. As a result, our proposed method generates higher PSNR values at compressed images and shows better visual quality, compared to conventional CNN-based SR methods.

• 대한방사선기술학회지:방사선기술과학
• /
• 제43권5호
• /
• pp.343-351
• /
• 2020

This study analyzed dose reduction and quality of images through dose reduction tools and shielding board to protect sensitive eye lens in radiation during orbit CT examinations for clinical data use. During CT scans of the phantom, surface dose (CT scanner dosimetry phantom, ion chamber-3 times) and quality of image (radiosurgery head phantom, visual assessment-2 times, HU standard deviation) were evaluated using X-care which is dose reduction tools and bismuth shielding board. The results of experiments of eight conditions showed a relatively reduced dose in all other conditions compared to when no conditions were set. In particular, the area corresponding to the ophthalmic part reduced the surface dose by up to 45.7 %. The visual evaluation of images by specialists and the quality evaluation of images analyzed by HU standard deviation were clinically closest to the use of X-care and shielding board (1 cm in height). Therefore, it is believed that the use of shielding board in a suitable location with dose reduction tools while investigating the optimal radiation dose will reduce the exposure dose of sensitive lens at radiation while maintaining the quality of the images with high diagnostic value.

• Nuclear Engineering and Technology
• /
• 제53권7호
• /
• pp.2341-2347
• /
• 2021

Because single-photon emission computed tomography (SPECT) is one of the widely used nuclear medicine imaging systems, it is extremely important to acquire high-quality images for diagnosis. In this study, we designed a super-resolution (SR) technique using dense block-based deep convolutional neural network (CNN) and evaluated the algorithm on real SPECT phantom images. To acquire the phantom images, a real SPECT system using a^99mTc source and two physical phantoms was used. To confirm the image quality, the noise properties and visual quality metric evaluation parameters were calculated. The results demonstrate that our proposed method delivers a more valid SR improvement by using dense block-based deep CNNs as compared to conventional reconstruction techniques. In particular, when the proposed method was used, the quantitative performance was improved from 1.2 to 5.0 times compared to the result of using the conventional iterative reconstruction. Here, we confirmed the effects on the image quality of the resulting SR image, and our proposed technique was shown to be effective for nuclear medicine imaging.

• 정보보호학회논문지
• /
• 제18권3호
• /
• pp.61-68
• /
• 2008

본 논문에서는 지문 영상의 품질을 평가하는 새로운 방법을 제안한다. 제안한 방법은 지문 융선의 분포와 방향성, 특징점의 밀도 뿐 아니라 지문의 크기, 위치 등을 분석하여 지문 영상의 품질을 평가하게 된다. 특히 지문의 입력 위치를 분석하여 한쪽으로 치우치거나 일부만 입력된 지문을 걸러냄으로서 인식 성능을 향상시킬 수 있다. 또한 제안한 품질 평가 방법을 다양한 지문 데이터베이스에 적용하여 지문 영상의 품질과 인식 성능 간의 상관도 분석을 수행하였으며, 이를 통하여 인식 성능 향상을 위한 영상의 품질에 대한 임계값을 결정할 수 있었다.

• International Journal of Computer Science & Network Security
• /
• 제24권1호
• /
• pp.163-177
• /
• 2024

The fingerprint image quality relies on the clearness of separated ridges by valleys and the uniformity of the separation. The condition of skin still dominate the overall quality of the fingerprint. However, the identification performance of such system is very sensitive to the quality of the captured fingerprint image. Fingerprint image quality analysis and enhancement are useful in improving the performance of fingerprint identification systems. A fuzzy technique is introduced in this paper for both fingerprint image quality analysis and enhancement. First, the quality analysis is performed by extracting four features from a fingerprint image which are the local clarity score (LCS), global clarity score (GCS), ridge_valley thickness ratio (RVTR), and the Global Contrast Factor (GCF). A fuzzy logic technique that uses Mamdani fuzzy rule model is designed. The fuzzy inference system is able to analyse and determinate the fingerprint image type (oily, dry or neutral) based on the extracted feature values and the fuzzy inference rules. The percentages of the test fuzzy inference system for each type is as follow: For dry fingerprint the percentage is 81.33, for oily the percentage is 54.75, and for neutral the percentage is 68.48. Secondly, a fuzzy morphology is applied to enhance the dry and oily fingerprint images. The fuzzy morphology method improves the quality of a fingerprint image, thus improving the performance of the fingerprint identification system significantly. All experimental work which was done for both quality analysis and image enhancement was done using the DB_ITS_2009 database which is a private database collected by the department of electrical engineering, institute of technology Sepuluh Nopember Surabaya, Indonesia. The performance evaluation was done using the Feature Similarity index (FSIM). Where the FSIM is an image quality assessment (IQA) metric, which uses computational models to measure the image quality consistently with subjective evaluations. The new proposed system outperformed the classical system by 900% for the dry fingerprint images and 14% for the oily fingerprint images.

• 한국방사선학회논문지
• /
• 제15권5호
• /
• pp.621-628
• /
• 2021

혈관 내 초음파 카테터의 주파수 관련 화질 분석에 대한 선행 연구는 국내 국외 모두 미비한 실정이다. 따라서 프로그램을 이용해 영상 화질 측정 방법의 기준을 마련하여 혈관 내 초음파 영상의 화질 분석 관련 연구자들에게 측정 방법을 제안하고자 본 연구를 진행하게 되었다. 대상으로는 혈관 내강 크기가 3.0 - 4.0 mm를 대상으로 혈관 내 초음파를 사용하기 전 초음파 카테터에 공기나 이물질이 들어가지 않도록 충분히 세척해주고 니트로글리세린(NTG)을 관상동맥 내 200 micro를 투여해 혈관을 충분히 확장시킨 영상의 정상 혈관 영상과 병변 혈관 영상을 대상으로 하였다. 기준이 되는 영상 획득 방법으로는 혈관 내 초음파 사용 시 혈관 병변 평가가 가장 우수한 심장 수축기 끝 구간의 영상을 DCAS PACS 프로그램을 통해 후향적으로 획득하여 기준을 설정하였다. 측정 방법 기준 설정 시 정상 혈관과 병변 혈관의 동심원적 및 편심원적에 해당하는 기준 설정 방법을 제안하였고 이 기준을 적용하여 정상 혈관과 병변 혈관의 내강과 외강 관심 영역 및 배경 영역 측정 방법에 대해 제안하였다. 결론적으로 본 연구자들이 고안해낸 방법을 통해 혈관 내 초음파 촬영 영상의 화질을 측정한다면 혈관 내 초음파 카테터의 종류를 불문하고 일관성 있는 화질 측정 진행이 가능하다 생각한다. 따라서 혈관 내 초음파 영상 화질 관련 연구 시 실제 화질 측정 방법에 대해 가이드라인으로 적용시킬 수 있을 것으로 사료된다.

• 전자공학회논문지B
• /
• 제33B권11호
• /
• pp.44-52
• /
• 1996

This paper proposes a KLT-CVQ scheme using PCNN to improbe the quality of the reconstructed images at a given bit rate. By using the PCNN and classified vector quantization, we exploit the high energy compaction and compelte decorrelation capbilities of the KLT, and the pdf (probability density function) shape and space-filling advantages of the vQ to improve the performance of the proposed hybrid coding technique. In order to preserve the preceptual fetures such as the edge components in the reconstructed images, we classified the input image blocks according to the texture energy measures of the local statistics and vector-coded them adaptively, and thereby reduces the possible edge degradation in the reconstructed images. The results of the computer simulations show that the performance of the proposed KLT-CVQ is higher than that of the KLT-CSQ or the DCT-CVQ in the quality of the reconstructed images at a given bit rate.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송∙미디어공학회 2019년도 추계학술대회
• /
• pp.228-229
• /
• 2019

Digital refocusing and perspective change are the most expected applications of light field (LF) images. As LF image has a large amount of data, its compression is very essential. The fidelity of LF image after compression needs to be evaluated differently depending on a specific application such as perspective change or refocusing. In this paper, we investigate the fidelity of images after perspective change and refocusing. Several state-of-the-art objective quality metrics are compared. Our experiment shows that IWPSNR is the most reliable metric for both perspective and focus changes, but it does not outperform the popular metrics such as PSNR and SSIM.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송∙미디어공학회 2017년도 추계학술대회
• /
• pp.218-220
• /
• 2017

Recently, stitching techniques are used for obtaining wide FOV, e.g., panorama contents, from normal cameras. Despite many proposed algorithms, the no objective quality evaluation method is developed, so the comparison of algorithms are performed only in subjective way. The paper proposes a 'Delaunay-triangulation based objective assessment method' for evaluating the geometric and photometric distortions of stitched or warped images. The reference and target images are segmented by Delaunay-triangulation based on matched points between two images, the average Euclidian distance is used for geometric distortion measure, and the average or histogram of PSNR for photometric measure. We shows preliminary results with several test images and stitching methods for demonstrate the benefits and application.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2009년도 IWAIT
• /
• pp.233-237
• /
• 2009

This paper represents a new approach which addresses quality degradation of a synthesized view, when a virtual camera moves forward. Generally, interpolation technique using only two neighboring views is used when a virtual view is synthesized. Because a size of the object increases when the virtual camera moves forward, most methods solved this by interpolation in order to synthesize a virtual view. However, as it generates a degraded view such as blurred images, we prevent a synthesized view from being blurred by using more cameras in multiview camera configuration. That is, we solve this by applying super-resolution concept which reconstructs a high resolution image from several low resolution images. Therefore, data fusion is executed by geometric warping using a disparity of the multiple images followed by deblur operation. Experimental results show that the image quality can further be improved by reducing blur in comparison with interpolation method.