• Journal of Navigation and Port Research
• /
• v.44 no.2
• /
• pp.110-118
• /
• 2020

With the expansion of the shipping and port logistics industry in the 21st century, the traffic density is continuously increased because of the increase in volumes of world sea freight and fleets, as well as the increase in the causes of potential marine accidents, such as ship collisions and stranding. Accordingly, the International Maritime Organization (IMO) has requested that the installation and operation of VTS should be applied in areas with high risk of marine traffic, and the request should be included as one of the Safety of Life at Sea (SOLAS) regulations. In this paper, the fundamental requirements of the radar system for vessel traffic services were analyzed and the analyzing factors were based on the IALA guideline.s This paper also includes results for the requirement and recommendation analysis on detection distance, target separation, and the target position accuracy of X-band radar. Also, to check if it satisfies the requirement of detection distance, range and azimuth separation of small point targets, and target position accuracy from the IALA guidelines, the test was conducted through the radar image acquired at the VTS center, and hence, the validity of the technical performance requirements was confirmed.

• Journal of Construction Engineering and Project Management
• /
• v.2 no.3
• /
• pp.1-7
• /
• 2012

The reconstruction of surfaces from unorganized point clouds can provide very useful information for construction managers. Although point clouds are generally created using 3D scanners, they can also be generated via the structure-from-motion technique using a sequence of images. Here we report a novel surface reconstruction technique for modeling and quantifying earthworks that can be used for preliminary planning, project updates and estimating of earthwork quantities, as well as embedded planning systems in construction equipment. The application of structure-from-motion techniques in earth works is examined and its advantages and limitations identified. Data from 23 earthwork excavation construction sites were collected and analyzed. 3D surface reconstructions during the construction phase were compared to the original land form. Similar experiments were conducted with piles of earth and the results analyzed to determine appropriate ranges of use for structure-from-motion surface reconstructions in earthwork applications. The technique was found to be most suited to pile of materials with volumes less than 2000 m3. Piles up to 10 m in height and with base areas up to $300m^2$ were also successfully reconstructed. These results should be of interest to contractors seeking to utilize new technology to optimize operational efficiency.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.333-336
• /
• 2007

SELENE, a Japanese lunar mission, has been launched this year. There are large volumes of images that were already archived and will be archived by missions such as SELENE. Automatic image analysis systems, which extract useful information from large amounts of data, are now required. The authors propose Lunar Surface GIS, which archives lunar surface information collected by lunar orbiting spacecraft and conducts geological analysis automatically. This system includes automatic crater detection, automatic age determination, and lava thickness estimation methods. In this paper, methods for automatically determining the age and estimating the lava thickness of lunar mare are described. The lunar surface age was determined by analyzing data of detected crater size and number using a crater chronology method. Lava thickness was estimated by the extent of the overlying material around the crater as well as the composition of underlying terrain units. In this result, the age map at Mare Crisium suggests the mare had been formed 3.0-3.7 b.y. ago. The lava thickness result suggests the thickest part of the mare is distributed around the center of the mare. The Lunar Surface GIS can produce a geological map, age map, and mare lava thickness map, for example.

• Journal of Korean Society for Geospatial Information Science
• /
• v.16 no.3
• /
• pp.65-69
• /
• 2008

This study is aimed to develope a remote control ship for acquisition of various underwater information. Remote control ship equipped with GPS, echosounder, sidescan sonar, subbottom profiler. Remote control ship is an automatic system for acquisition of inland water and coast information. For the development of remote control ship, underwater information acquisition of reservoir, dam, polluted area is expected. Also, multibeam echosounder, image sensor, water analysis sensor, etc. could be equipped in one ship. So robot-ship will be applied for the most part of industry managing water resources and preventing the flood by making bed topographic map and estimating water volumes.

• Applied Microscopy
• /
• v.46 no.4
• /
• pp.184-187
• /
• 2016

Neuronal connectivity determines brain function. Therefore, understanding the full map of brain connectivity with functional annotations is one of the most desirable but challenging tasks in science. Current methods to achieve this goal are limited by the resolution of imaging tools and the field of view. Macroscale imaging tools (e.g., magnetic resonance imaging, diffusion tensor images, and positron emission tomography) are suitable for large-volume analysis, and the resolution of these methodologies is being improved by developing hardware and software systems. Microscale tools (e.g., serial electron microscopy and array tomography), on the other hand, are evolving to efficiently stack small volumes to expand the dimension of analysis. The advent of mesoscale tools (e.g., tissue clearing and single plane ilumination microscopy super-resolution imaging) has greatly contributed to filling in the gaps between macroscale and microscale data. To achieve anatomical maps with gene expression and neural connection tags as multimodal information hubs, much work on information analysis and processing is yet required. Once images are obtained, digitized, and cumulated, these large amounts of information should be analyzed with information processing tools. With this in mind, post-imaging processing with the aid of many advanced information processing tools (e.g., artificial intelligence-based image processing) is set to explode in the near future, and with that, anatomic problems will be transformed into informatics problems.

• Environmental Engineering Research
• /
• v.17 no.4
• /
• pp.197-203
• /
• 2012

Phosphorus removal during discharge of wastewater is required to achieve in a very high level because eutrophication occurs even at a very low phosphorus concentration. However, there are limitations in the traditional technologies in the removal of phosphorus at very low concentration, such as at a level lower than 0.1 mg/L. Through a series of experiments, a possible technology which can remove phosphate to a very low level in the final effluent of wastewater was suggested. At first Al, Zn, Ca, Fe, and Mg were exposed to phosphate solution by impregnating them on the surface of activated alumina to select the material which has the highest affinity to phosphate. Kinetic tests and isotherm tests on phosphate solution have been performed on four media, which are Ca-impregnated activated alumina, activated alumina, Ca-impregnated loess ball, and loess ball. Results showed that Ca-impregnated activated alumina has the highest capacity to adsorb phosphate in water. Scanning electron microscope image analysis showed that activated alumina has high void volume, which provides a large surface area for phosphate to be adsorbed. Through a continuous column test of the Ca-impregnated activated alumina it was discovered that about 4,000 bed volumes of wastewater with about 0.2 mg/L of phosphate can be treated down to lower than 0.14 mg/L of concentration.

• Molecules and Cells
• /
• v.26 no.4
• /
• pp.356-361
• /
• 2008

In this work, we have studied the structural and functional linkage between lamin A/C, nuclear actin, and organization of chromosome territories (CTs) in mammary carcinoma MCF-7 cells. Selective down-regulation of lamin A/C expression led to disruption of the lamin A/C perinuclear layer and disorganization of lamin-bound emerin complexes at the inner nuclear membrane. The silencing of lamin A/C expression resulted in a decrease in the volume and surface area of chromosome territories, especially in chromosomes with high heterochromatin content. Inhibition of actin polymerization led to relaxation of the structure of chromosome territories, and an increase in the volumes and surface areas of the chromosome territories of human chromosomes 1, 2 and 13. The results show an important role of polymeric actin in the organization of the nuclei and the chromosome territories.

• International journal of advanced smart convergence
• /
• v.8 no.2
• /
• pp.204-210
• /
• 2019

Mobile Crowd Computing is one of the most efficient and effective way to collect the Electronic health records and they are very intelligent in processing them. Mobile Crowd Computing can handle, analyze and process the huge volumes of Electronic Health Records (EHR) from the high-performance Cloud Environment. Electronic Health Records are very sensitive, so they need to be secured, authenticated and processed efficiently. However, security, privacy and authentication of Electronic health records(EHR) and Patient health records(PHR) in the Mobile Crowd Computing Environment have become a critical issue that restricts many healthcare services from using Crowd Computing services .Our proposed Efficient Multi-layer Encryption Framework(MLEF) applies a set of multiple security Algorithms to provide access control over integrity, confidentiality, privacy and authentication with cost efficient to the Electronic health records(HER)and Patient health records(PHR). Our system provides the efficient way to create an environment that is capable of capturing, storing, searching, sharing, analyzing and authenticating electronic healthcare records efficiently to provide right intervention to the right patient at the right time in the Mobile Crowd Computing Environment.

• Nuclear Engineering and Technology
• /
• v.53 no.1
• /
• pp.208-215
• /
• 2021

Cosmic-ray muon scattering tomography (MST) technology is a new radiation imaging technology with unique advantages. As the performance of its image reconstruction algorithm has a crucial influence on the imaging quality, researches on this algorithm are of great significance to the development and application of this technology. In this paper, a fast inspection algorithm based on clustering analysis for the identification of the existence of nuclear materials is studied and optimized. Firstly, the principles of MST technology and a binned clustering algorithm were introduced, and then several simulation experiments were carried out using Geant4 toolkit to test the effects of exposure time, algorithm parameter, the size and structure of object on the performance of the algorithm. Based on these, we proposed two optimization methods for the clustering algorithm: the optimization of vertical distance coefficient and the displacement of sub-volumes. Finally, several sets of experiments were designed to validate the optimization effect, and the results showed that these two optimization methods could significantly enhance the distinguishing ability of the algorithm for different materials, help to obtain more details in practical applications, and was therefore of great importance to the development and application of the MST technology.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.8
• /
• pp.761-767
• /
• 2009

The detection of target echoes in a sonar image is usually difficult since reverberation is originated by the returns reflected around the boundary and volumes. Under the scenario of the target presence around the reverberation, the detection performance of existing algorithms is degraded. Since they have a similar statistical features. But proposed detector gives improvement existing algorithms Under this scenario. In this paper, 4 segmentation contrast box algorithm using maximum contrast value is proposed based on statistical segmentation, which gives better detection performance in the sense of reducing false alarms. The simulations validate the effectiveness of the proposed algorithm.