• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.12
• /
• pp.2337-2342
• /
• 2008

In this paper, we propose the novel approach to enhance the visual quality of the digital image with adaptively sharpening and removing the noise. Image enhancement is performed in two ways. The pixels in the high dynamics area are sharpened by the adaptive unsharp mask with the parameter, which is derived using the statistical information of the image. On the other hand, the proposed algorithm do not perform the sharpening process in the uniform area that may cause the undesired artifact due to noise amplification, rather it performs smoothing to suppress the noise in this area. The decision, which process will be applied at the pixel, is also controlled by the statistics of the pixel dynamics. The proposed algorithm enhances the visual quality almost automatically by sharpening and smoothing at the same time with less parameter selection.

• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.3
• /
• pp.220-230
• /
• 1993

Photoelastic isochromatic fringes related to the difference of principal stresses have some bandwidth whose light intensities are not constant and asymmetrical in experimental images. Hence, it is difficult to measure fringe order accurately at a data point by visual observation. In this study, a method of fringe sharpening, which can extract shapened lines from both full-and half-order fringes by digital image processing, is developed. To test the method, various simple photelastic fringe patterns are simulated and their images are processed to yield sharpened lines. The method is then applied to general problems such as images of a circular disk compressed by diametrically concentrated loads and a circular cylinder sybject to internal pressure. The procedure is proved to be capable of extracting sharpened lines accurately from photoelastic isochromatic fringes.

• Korean Journal of Remote Sensing
• /
• v.33 no.6_1
• /
• pp.1003-1017
• /
• 2017

Multispectral image data of high spatial resolution is required to obtain correct information on the ground surface. The multispectral image data has lower resolution compared to panchromatic data. PAN-sharpening fusion technique produces the multispectral data with higher resolution of panchromatic image. Recently the object-based approach is more applied to the high spatial resolution data than the conventional pixel-based one. For the object-based image analysis, it is necessary to perform image segmentation that produces the objects of pixel group. Image segmentation can be effectively achieved by the process merging step-by-step two neighboring regions in RAG (Regional Adjacency Graph). In the satellite remote sensing, the operational environment of the satellite sensor causes image degradation during the image acquisition. This degradation increases variation of pixel values in same area, and results in deteriorating the accuracy of image segmentation. An iterative approach that reduces the difference of pixel values in two neighboring pixels of same area is employed to alleviate variation of pixel values in same area. The size of segmented regions is associated with the quality of image segmentation and is decided by a stopping rue in the merging process. In this study, the image restoration and segmentation was quantitatively evaluated using simulation data and was also applied to the three PAN-sharpened multispectral images of high resolution: Dubaisat-2 data of 1m panchromatic resolution from LA, USA and KOMPSAT3 data of 0.7m panchromatic resolution from Daejeon and Chungcheongnam-do in the Korean peninsula. The experimental results imply that the proposed method can improve analytical accuracy in the application of remote sensing high resolution PAN-sharpened multispectral imagery.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.15 no.2
• /
• pp.113-122
• /
• 2005

In this paper, we propose a multi-watermarking algorithm to satisfy two purposes: fragility against malicious attacks and robustness against non-malicious attacks. The algorithm can be used for image authentication using coefficients of Discrete Wavelet Transform(DWT). In the proposed method, watermarks are generated by combining binary image with some features extracted from the subband LL3, and then they are embedded into both the spatial and frequency domain. That is, on the spatial domain they are embedded into the Least Significant Bit(LSB) of all pixels of image blocks, and on the frequency domain the coefficients of the subband LH2 and HL2 are adjusted according to the watermarks. Thus the algorithm not only resists malicious attack but also permits non-malicious attacks such as blurring, sharpening, and JPEG compression.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2785-2788
• /
• 2001

In this paper, we present a new interpolation scheme for image enhancement using fuzzy inference. In general, interpolation techniques are based on linear operators which are essentially lowpass filters, hence, they tend to blur fine details in the original image. In our approach, the operator itself balances the strength of its sharpening and noise suppressing components according to the properties of the input image data.

• Journal of the Korean Society of Radiology
• /
• v.11 no.2
• /
• pp.69-77
• /
• 2017

This paper proposes a composite filter for noise reduction of image. To improve the image quality by reducing the noise in the liver ultrasound image, we tried to help the accurate image analysis. In the experiment, the top seven composite filters were selected by combining the Gaussian blur filter, the sharpening filter, and the median filter using the ATS-539 ultrasonic phantom, and applied to the ultrasound image in which this was done. As a result, it was found that the values of SNR, CNR and MSR all increased when the top seven composite filters were applied. In addition, PSNR of more than 30 dB, close to SSIM 1 showed that the image loss rate is small. Therefore, the appropriate application of the proposed composite filter in this research will be useful for accurate video reading and analysis.

• Journal of KIISE:Software and Applications
• /
• v.34 no.11
• /
• pp.961-970
• /
• 2007

Since the usual conventional edge detectors employ the local differential derivatives, the detected edges are not uniform in their widths or some edges are missed out of the detection on magnified images. We employ a mapping from the exactly monotonic intensity distributions of ramp edges to the simple step functions of intensity, which is referred to as perfect sharpening map of ramp edges. This map is based on the non-local feature of intensity distribution and used to introduce a modified differentiation, in terms of which we can construct an efficient edge detector adaptive to the variation of edge width. By adopting the operator MADD in this paper, we developed an edge detector that works stably against the magnification of image or the variation of edge width. It is shown by comparing to the conventional algorithms that the proposed one is very excellent.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.19 no.3
• /
• pp.200-206
• /
• 1999

This paper describes the stress analysis of a curved beam by using photoelasticity. In order to measure accurate isochromatic fringe orders at certain locations. fringes are doubled and sharpened by digital image processing. After fringe multiplication and sharpening. fringe orders can be read as a quarter order interval (N=0, 1/4, 2/4, 3/4,...). The results obtained from photoelastic experiment are compared with those calculated by using theory. Two results are agreed well even though there are some scatter bands with maximum 8 percent for the results of photoelastic measurements and theoretical calculation. Difference may be occurred due to the slight misalignment of the direction to which axial load is applied in photoelastic experiment. It is confirmed that accurate measurement of stress distribution can be possible by using the techniques of fringe multiplication and sharpening in photoelasticity.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.8C
• /
• pp.811-820
• /
• 2003

In this paper, multi-watermarking algorithm is proposed to satisfy two purpose of ownership protection and tamper proofing simultaneously. At first, for robust watermarking, the location of the embedding wavelet coefficient is selected by using existing QSWT algorithm. And then, we propose the method inserting discrete cosine transformed watermark. The watermarked image is watermarked again for the tamper proofing. The tamper proofing algorithm is also proposed. According to the experimental results, the proposed multi-watermarking algorithm is robust to the attack, such as blurring, sharpening, JPEG compression. And also, the tampered area are detected in blocks, making it simple to judge which pixels are changed.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.04a
• /
• pp.115-120
• /
• 2000

This study is on the application the image processing algorithm for inspection of the aluminium mill strip surface defect. The image of surface defect data was obtained using the CCD camera with the digital signal board. The edge was found from the difference of pixel intensity between the normal image and defect image. Two step were taken to find the edge in the image processing algorithm. First, noise was removed by using the median filter in the image. Second, the edge was sharpened in detail by using the sharpening convolution filter in the image. Canny algorithm was used to defect the exact edge. The defect section was separated from the original image is to find the coordination point p1 and p2 which include the defect image