• Archives of design research
• /
• v.19 no.2 s.64
• /
• pp.81-90
• /
• 2006

Pedestrians perceive differently from the sideway views or the exteriors of the buildings on the way to their destinations. Therefore, the navigation experience can become much different when the path was chosen based on the individual's preference from it is not. By focusing on the effects of the individual pedestrian' path choice on their navigation, this paper presents an algorithm designed for pedestrians to be able to explore their preferred path and proposes a prototype of navigation system based on the algorithm. The navigation support system searches for the best path upon their individual preferences and information of the destination. The system provides the process of retrieving the final path via the pedestrian-support system interaction. The path retrieval is peformed with the combinational matrix of keywords that are formulates Fuzzy theory from the correlations between the terms describing preferences used in the path preference survey. This paper presents the potentials of the path finding method tailored to pedestrians' preferences by a simulation of the proposed path retrieval algorithm.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.11
• /
• pp.2662-2670
• /
• 1997

High speed network makes possible to transfer not only the test data but also multimedia data such as audio, image, and moving pictures and etc. In a multimedia applications, as a multimedia storage system, it is necessary to use a disk array to store and retrieve data by real time. It is important feature to various disk array parameters as a storage system on a real VOD system, such as configuration method of each disks and allocation method of multimedia data. In this paper, various parameters for the disk array are decided to be used for the video-on-demand system application by simulations in two ways. The real and simulation measurement are compared and analyzed on the performance. Simulation results shows that RAID level 5 and 256KB as striping unit and 185KB as data requests size per seconds are suitable parameter for the disk array architecture which provides MPEG-1 files with a rate of 1.5Mbps in two measurements of real and simulation.

• Nuclear Engineering and Technology
• /
• v.55 no.9
• /
• pp.3268-3276
• /
• 2023

The practice of identifying the potential zones for mineral exploration in a speedy and low-cost method includes the use of satellite imagery analysis as a part of remote sensing techniques. It is challenging to explore the iron mineralization of a region through conventional methods which are a time-consuming process. The current study utilizes the Hyperion satellite imagery for mapping the iron mineralization and associated geological features in the Irikkur region, Kannur, Kerala. Along with the remote sensing results, the field study and laboratory-based analysis were conducted to retrieve the ground truth point and geochemical proportion to verify the iron ore mineralization. The MC simulation showed for shielding properties indicate an increase in the linear attenuation coefficient with raising the Fe₂O₃+SiO₂ concentrations in the investigated rocks where it is varied at 0.662 MeV in the range 0.190 cm^-1 - 0.222 cm^-1 with rising the Fe₂O₃+SiO₂ content from 57.86 wt% to 71.15 wt%. The analysis also revealed that when the γ-ray energy increased from 0.221 MeV to 2.506 MeV, sample 1 had the largest linear attenuation coefficient, ranging from 9.33 cm1 to 0.12 cm^-1. Charnockite rocks were found to have exceptional shielding qualities, making them an excellent natural choice for radiation shielding applications.

• Korean Journal of Cognitive Science
• /
• v.20 no.1
• /
• pp.79-107
• /
• 2009

Episodic memory, i.e. memorization of information within a spatiotemporal environment, is affected Alzheimer's disease(AD), but its impairment may also be occurred in the normal aging process. The purpose of this study is to analyze and evaluate memory in with Dementia of Alzheimer Type by examining their cognitive skills in episodic memory using the technique. This new method involves assessing the mental images the subject's own past in the mind like projected and movies. Three patients in the early stage of Dementia of Alzheimer Type, one with mild depression, and 2 healthy controls for comparison were asked to retrieve their episodic memory of the previous day, week, month, and a day testing day. The answers were then analyzed with regards to their specific features as emotional state, color, and time order. In the following day, the subjects were tasked to recall again the images they reproduced in the day's test order to observe of memory. Results showed that all 3 patients failed to arrange the retrieved images in time order and their images of the previous day were unclear in color and were stationary like photographs, even when they reproduced the mental images at much quantity as controls. patients could not remember particular events of yesterday, and only recalled the general occurrences of every day life. These results suggest that in the early stage of Dementia of Alzheimer Type, difficulties in the retrieval of recent episodic memory begin to primarily occur, and qualitative impairment happens earlier than quantitative.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.44 no.1
• /
• pp.10-16
• /
• 2007

In this paper, we propose a technique for retrieving images using spatial color correlation and texture characteristics based on local fourier transform. In order to retrieve images, two new descriptors are proposed. One is a color descriptor which represents spatial color correlation. The other is a descriptor combining the proposed color descriptor with texture descriptor. Since most of existing color descriptors including color correlogram which represent spatial color correlation considered just color distribution between neighborhood pixels, the structural information of neighborhood pixels is not considered. Therefore, a novel color descriptor which simultaneously represents spatial color distribution and structural information is proposed. The proposed color descriptor represents color distribution of Min-Max color pairs calculating color distance between center pixel and neighborhood pixels in a block with 3x3 size. Also, the structural information which indicates directional difference between minimum color and maximum color is simultaneously considered. Then new color descriptor(min-max color correlation descriptor, MMCCD) containing mean and variance values of each directional difference is generated. While the proposed color descriptor includes by far smaller feature vector over color correlogram, the proposed color descriptor improves 2.5 % ${\sim}$ 13.21% precision rate, compared with color correlogram. In addition, we propose a another descriptor which combines the proposed color descriptor and texture characteristics based on local fourier transform. The combined method reduces size of feature vector as well as shows improved results over existing methods.

• Proceedings of the KSRS Conference
• /
• 1998.09a
• /
• pp.286-291
• /
• 1998

SAR has provided weather independent images on land and sea surface, which can be used for extracting various useful informations. Recently attempts to estimate wind field parameters from SAR images over the oceans have been made by various groups over the world. Although scatterometer loaded in ERS-1 and ERS-2 observes the global wind vector field at spatial resolution of 50 Km with accuracies of $\pm$2m/s in speed, the spatial resolution may not be good enough for applications in coastal regions. It is weil known the sea surface roughness is closely correlated to the wind field, but the wind retrieval algorithms from SAR images are yet in developing stage. Since the radar backscattering properties of the SAR images are principally the same as that of scatterometer, some previous studies conducted by other groups report the success in mesoscale coastal wind field retrievals using ERS SAR images. We have tested SWA (SAR Wind Algorithm) and CMOD4 model for estimation of wind speed using an ERS-1 SAR image acquired near Cheju Island, Korea, in October 11, 1994. The precise estimation of sigma nought and the direction of wind are required for applying the CMOD4 model to estimate wind speed. The wind speed in the test sub-image is estimated to be about 10.5m/s, which relatively well agrees to the observed wind speed about 9.0m/s at Seoguipo station. The wind speed estimation through the SWA is slightly higher than that of CMOD4 model. The sea surface condition may be favorable to SWA on the specific date. Since the CMOD4 model requires either wind direction or wind speed to retrieve the wind field, we should estimate the wind speed first using other algorithm including SWA. So far, it is not conclusive if the SWA can be used to provide input wind speed data for CMOD4 model or not. Since it is only initial stage of implementing the wind field retrieval algorithms and no in-situ observed data is currently avaliable, we are not able to evaluate the accuracy of the results at the moment. Therefore verification studies should be followed in the future to extract reliable wind field information in the coastal region using ERS SAR images.

• Journal of KIISE:Databases
• /
• v.36 no.2
• /
• pp.73-83
• /
• 2009

In this paper we propose an object similarity matching method based on shape characteristics of an object in an image. The proposed method extracts edge points from edges of objects and generates a log polar histogram with respect to each edge point to represent the relative placement of extracted points. It performs the matching in such a way that it compares polar histograms of two edge points sequentially along with edges of objects, and uses a well-known k-NN(nearest neighbor) approach to retrieve similar objects from a database. To verify the proposed method, we've compared it to an existing Shape-Context method. Experimental results reveal that our method is more accurate in object matching than the existing method, showing that when k=5, the precision of our method is 0.75-0.90 while that of the existing one is 0.37, and when k=10, the precision of our method is 0.61-0.80 while that of the existing one is 0.31. In the experiment of rotational transformation, our method is also more robust compared to the existing one, showing that the precision of our method is 0.69 while that of the existing one is 0.30.

• Spatial Information Research
• /
• v.8 no.1
• /
• pp.141-153
• /
• 2000

The purpose of this study is to develop and apply spatial landslide information system using Geographic information system (GIS) in concerned with spatial data. Landslide locations detected from interpretation of aerial photo and field survey, and topographic , soil , forest , and geological maps of the study area, Yongin were collected and constructed into spatial database using GIS. As landslide occurrence factors, slope, aspect and curvature of topography were calculated from the topographic database. Texture, material, drainage and effective thickness of soil were extracted from the soil database, and type, age, diameter and density of wood were extracted from the forest database. Lithology was extracted from the geological database, and land use was classified from the Landsat TM satellite image. In addition, landslide damageable objects such as building, road, rail and other facility were extracted from the topographic database. Landslide susceptibility was analyzed using the landslide occurrence factors by probability, logistic regression and neural network methods. The spatial landslide information system was developed to retrieve the constructed GIS database and landslide susceptibility . The system was developed using Arc View script language(Avenue), and consisted of pull-down and icon menus for easy use. Also, the constructed database can be retrieved through Internet World Wide Web (WWW) using Internet GIS technology.

• The KIPS Transactions:PartA
• /
• v.10A no.2
• /
• pp.93-100
• /
• 2003

With the advent of distributed computing and Web service technologies, lots of users have been requiring services that can conveniently obtain and/or support well-assembled information based on Web. For this reason, we are to construct Automatic Linking Support Systems for generating Web-based integrated information and supporting retrieval information according to user's various requirements. Our system organization is based on client/server system. A server environment consisted of automatic linking engine that can provide lexical analyzing, query processing and integrated document generating functions, and databases that are made of dictionaries, image and URL contents. Also, client environments consisted of Web editor that can generate integrated documents and Web helper that can retrieve them via automatic linking engine and databases. For client's user-friendly interfaces, web editor and helper programs can directly execute by down leading from a server without setup them before inside clients. For reducing server's overheads, Parts of server's executing modules are distributed to clients on which they can be executing. As an implementation of our system, we use the JDK 1.3, SWING for user interfaces like Web editor and helper, RMI mechanism for interaction between clients and a server, and SQL server 7.0 for database development, respectively. Finally, we showed the access procedures of automatic document linking engine and databases from Web editor or Web helper, and results appearing on their screens.

• Korean Journal of Remote Sensing
• /
• v.34 no.6_3
• /
• pp.1383-1398
• /
• 2018

Sea surface wind is one of the most fundamental variables for understanding diverse marine phenomena. Although scatterometers have produced global wind field data since the early 1990's, the data has been used limitedly in oceanic applications due to it slow spatial resolution, especially at coastal regions. Synthetic Aperture Radar (SAR) is capable to produce high resolution wind field data. KOMPSAT-5 is the first Korean satellite equipped with X-band SAR instrument and is able to retrieve the sea surface wind. This study presents the validation results of sea surface wind derived from the KOMPSAT-5 backscattering coefficient data for the first time. We collected 18 KOMPSAT-5 ES mode data to produce a matchup database collocated with buoy stations. In order to calculate the accurate wind speed, we preprocessed the SAR data, including land masking, speckle noise reduction, and ship detection, and converted the in-situ wind to 10-m neutral wind as reference wind data using Liu-Katsaros-Businger (LKB) model. The sea surface winds based on XMOD2 show root-mean-square errors of about $2.41-2.74m\;s^{-1}$ depending on backscattering coefficient conversion equations. In-depth analyses on the wind speed errors derived from KOMPSAT-5 backscattering coefficient data reveal the existence of diverse potential error factors such as image quality related to range ambiguity, discrete and discontinuous distribution of incidence angle, change in marine atmospheric environment, impacts on atmospheric gravity waves, ocean wave spectrum, and internal wave.