• Journal of the Korean Society of Radiology
• /
• v.15 no.5
• /
• pp.575-584
• /
• 2021

The aim of this study was to achieve optimal portal phase while reducing contrast medium by applying weight-based dose protocol compared to standard fixed dose protocol to performing of pediatric abdominal CT examination. Discovery 750HD (General Electric Medical Systems, Milwaukee, USA) was used, and a total of 167 children consisting of 85 men and 82 women under the age of 18 were studied. The group in which the 300 mgI/ml(Xenetix, Guerbet, France) contrast medium was fixedly injected at twice body weight and the group injected with physiological saline while gradually decreasing the injection amount by 10% while applying the weight-based protocol were distinguished. Also, the CT number and SNR of abdominal organs were compared and evaluated while changing the scan delay time. Subjective image quality of enhancement and beam-hardening artifacts of around the heart was assessed with five-point criterion. The group adapted weight-based protocol with 20% reduction in contrast medium was most similar in contrast enhancement in the group with fixed injection at twice body weight. Furthermore, the group with a delay time of 20% had the highest contrast enhancement effect, and the difference in CT attenuation coefficient from the group scanned immediately after injection of the contrast media. Therefore, the appropriate delay time after injection of the contrast agent increased the contrast enhancement of the parenchymal organ. In addition, the weight-based injection protocol with normal saline reduced artifacts around the heart, and the effect of contrast enhancement could be maintained. In conclusion, it is possible to reduce dosage of contrast media through the application of weight-based injection protocols and appropriate latency, and to characterize optimal portal phase imaging on pediatric abdominal CT.

• Journal of the Korean Geotechnical Society
• /
• v.37 no.10
• /
• pp.13-25
• /
• 2021

The most widely used method for determining the blast effects of explosives is the Trauzl test. This test is used to measure the explosive power (strength) of a substance by determining volume increase, which is produced by the detonation of a tested explosive charge in the cavity of a lead block with defined quality and size. In this paper, Trauzl lead block test and High speed 3D-DIC (Digital Image Correlation) system were conducted to evaluate the stemming effect of the blast hole. The effects of stemming materials can be expressed as the expansion of the cavity in a standard lead block through explosion of the explosives. The blasting experiment was conducted with emulsion explosives. The stemming material in the blast hole of lead block, which was adopted in this study, were using sand and stone chips. Results of blasting experiment and numerical analysis showed that the expansion rates of lead block were most affected by stone chips followed by sand. Also, as result of dynamic strain measurement on the lead block surface of High speed 3D-DIC system, the displacement and surface strain on the block were the highest in the experiment case of stone chips stemming.

• Korea Science and Art Forum
• /
• v.37 no.2
• /
• pp.205-217
• /
• 2019

This study began with the focusing the growth of importance of cultural marketing and its successes by applying to branding in a phase in which the cultural production era has arrived after the industrial production era. This study aimed to reveal the effect of cultural marketing, which are used as marketing strategy in the tourism field, on brand attitude and awareness. Therefore, this study tried to investigate the brand equity and attitude in accordance with the cultural marketing factors by survey Chinese tourists visiting Korea. The result and contents of the study are as follows. First, it was confirmed that the research question on the possibility of market segmentation in accordance with cultural marketing factors; the market segments were classified as Cluster 1 general involvement perceived group, Cluster 2 high involvement perceived group, Cluster3 middle involvement perceived group. Second, it revealed significant differences on brand attitude among the segments; Cluster 2 showed high brand attitude and Cluster 3 showed average level on brand attitude. Third, it found a statistically significant differences in the perception of brand equity including perceived quality, brand awareness and brand image of tourism destination. In conclusion, this study was able to identify market segments in accordance with cultural marketing factors of tourism destination and revealed significant differences in the segments by brand attitude and brand equity. This could provide practical implication that various cultural marketing activities to generate positive results on brand equity and brand attitude and cultural marketing strategies is also needed to increase foreign tourists' awareness of these cultural marketing activities.

• Korean Journal of Remote Sensing
• /
• v.34 no.6_3
• /
• pp.1445-1456
• /
• 2018

The purpose of this study is to compare the quality and characteristics of matching DEMs by using KOMPSAT-3 stereo pair capture in in-track and cross-track. For this purpose, two stereo pairs of KOMPSAT-3 were collected that were taken in the same area. The two stereo pairs have similar stereo geometry elements such as B/H, convergence angle. Sensor modeling for DEM production was performed with RFM affine calibration using multiple GCPs. The GCPs used in the study were extracted from the 0.25 m ortho-image and 5 meter DEM provided by NGII. In addition, matching DEMs were produced at the same resolution as the reference DEMs for a comparison analysis. As a result of the experiment, the horizontal and vertical errors at the CPs indicated an accuracy of 1 to 3 pixels. In addition, the shapes and accuracy of two DEMs produced in areas where the effects of natural or artificial surface land were low were almost similar.

• Korean Journal of Remote Sensing
• /
• v.34 no.6_3
• /
• pp.1383-1398
• /
• 2018

Sea surface wind is one of the most fundamental variables for understanding diverse marine phenomena. Although scatterometers have produced global wind field data since the early 1990's, the data has been used limitedly in oceanic applications due to it slow spatial resolution, especially at coastal regions. Synthetic Aperture Radar (SAR) is capable to produce high resolution wind field data. KOMPSAT-5 is the first Korean satellite equipped with X-band SAR instrument and is able to retrieve the sea surface wind. This study presents the validation results of sea surface wind derived from the KOMPSAT-5 backscattering coefficient data for the first time. We collected 18 KOMPSAT-5 ES mode data to produce a matchup database collocated with buoy stations. In order to calculate the accurate wind speed, we preprocessed the SAR data, including land masking, speckle noise reduction, and ship detection, and converted the in-situ wind to 10-m neutral wind as reference wind data using Liu-Katsaros-Businger (LKB) model. The sea surface winds based on XMOD2 show root-mean-square errors of about $2.41-2.74m\;s^{-1}$ depending on backscattering coefficient conversion equations. In-depth analyses on the wind speed errors derived from KOMPSAT-5 backscattering coefficient data reveal the existence of diverse potential error factors such as image quality related to range ambiguity, discrete and discontinuous distribution of incidence angle, change in marine atmospheric environment, impacts on atmospheric gravity waves, ocean wave spectrum, and internal wave.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.23 no.1
• /
• pp.54-58
• /
• 2019

Purpose At now, there are many kind of dedicated heart SPECT machine in clinical nuclear medicine. Among those, the fixed focusing type SPECT can make a good quality, quantity image because a detectors of this SPECT arranged forward a special ROI and didn't rotate around of body. So, in this paper, we will evaluate a spatial uniformity about resolution and sensitivity at a same plane of a fixed focusing type SPECT. Materials and Methods We used D-SPECT as a fixed focusing type SPECT and Cario MD as a rotated parallel type SPECT to comparing each other. We injected $^{99m}Tc(14.8MBq/1cc)$ to 10 capillary tube (diameter=1mm), and we set those line sources a tfield of view of each SPECT. And then we acquired SPECT date, we applied are construction by recommended methods. By using two tomography images, we calculated a full width of half maximum as a resolution and total counts as a sensitivity, and we compared a CV (coefficientofvariation) values between two images as a spatial uniformity. Results In case of D-SPECT, a CV of resolution and sensitivity are 7.45%, 12.34%. In case of Cario MD, an CV of resolution and sensitivity are 12.49%, 21.84% Conclusion As a results, CV of resolution and sensitivity of a fixed focusing type SPECT is 67.75%, 77.00% higher than ones of a rotated parallel type SPECT. It means that a fixed focusing type SPECT is more uniformed, because this new SPECT can reduce a motion blur artifact by rotating detector around body, also all of detector that made by semiconductor arrange forward a special FOV like heart.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.47 no.3
• /
• pp.71-80
• /
• 2019

The Fourth Industrial Revolution, centered on intelligence and information, began to take hold in 2016. This study uses virtual reality technology, which is the most popular technology of the Fourth Industrial Revolution. The purpose of this study is to explore a Virtual Walk-through method, which can be easily applied to landscape architecture. At present, virtual reality technology is widely used in the fields of games, emergency training, and architectural design. However, in the field of landscape architecture, it is still in the development stage. In addition, most of the traditional ways to display virtual reality use 2D images, but such methods have some limitations. Therefore, this research addresses the three stages of "design-exhibition-experience" and puts forward a new simple method called 'Virtual Walk-through' that breaks from traditional landscape design exhibitions. The results show that compared with traditional methods, virtual reality has many advantages, such as the freedom of experience, a diversity of viewing angles, information supply, interaction, etc. It can show high quality images and effects, which are suitable for landscape design. It provides an evaluation method for garden design that can be utilized in the future. It is simple and has value as it can reflect the method and the expected effects. Virtual reality technology can bring an infinite number of prospects to the development of landscape architecture.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.4
• /
• pp.129-137
• /
• 2019

New technology leads the fast changes to cope with the fourth industrial revolution in the modern society. To meet the changes of the times, not only daily life but also cultural life of the modern people are changing, and these changed the times when we watch the cultural performances such as drama, musical, and opera that we should appreciate onsite into the times to see them whenever and wherever we want to see upon digitalizing them. However, studies have not been actively performed on the performance videos unlike other areas probably since they expect better image quality and services. Hence, considering the expectations from performance video contents by consumers as benefit, convenience, and innovation, this study was conducted to review the effectiveness of these attributes on the trust and satisfaction level. Also, upon reviewing the effectiveness of these on the word of mouth effect, expansion potential of the performance video contents was investigated to deduct the meaningful implications. Study results showed that benefit and convenience affected trust and satisfaction positively while innovation did not affect them at all. Yet, trust and satisfaction showed the positive influence on the word of mouth effect.

• Journal of radiological science and technology
• /
• v.43 no.6
• /
• pp.475-480
• /
• 2020

The purpose of this study was to reconstruct diffusion tensor tractography (DTT) using stem of garlic and asparagus for in vitro phantom of diffusion tensor imaging (DTI), and to compare and evaluate the fractional anisotropy (FA) value and the apparent diffusion coefficient (ADC) value to determine whether it can be used as materials for in vitro phantoms. Among various plant fibers such as stem of garlic, palmae, cotton, asparagus, etc., stem of garlic and asparagus, which are considered to be the most suitable for making phantoms, and whose shape is considered to be the most suitable for making phantoms, were selected and tests were conducted. Holes were made in a plastic bucket at an angle of 0°, 30°, 60°, 90°, and 120°, then tubes were inserted. In the tube, asparagus and stem of garlic were inserted as far in as possible, and the inserted tube was inserted into the center of the heat bathed gelatin to harden. We were able to reproduce DTT images in asparagus and stem of garlic. Fiber tissues of asparagus and stem of garlic did not show complete connectivity, but the reconstructed images of DTT showed good connectivity. The FA values of asparagus in the tubes were 0.198 at 0° (straight), 0.207 at 30°, 0.187 at 60°, 0.231 at 90°, and 0.204 at 120°. In addition, the FA values of stem of garlic in the tubes were 0.235 at 0°, 0.236 at 30°, 0.216 at 60°, 0.218 at 90°, and 0.257 at 120°. The ADC values of asparagus in the tubes were 1.545 at 0°, 1.677 at 30°, 1.629 at 60°, 1.535 at 90°, and 1.725 at 120°. In addition, the ADC values of stem of garlic in the tubes were 1.252 at 0°, 1.396 at 30°, 1.698 at 60°, 1.756 at 90°, and 1.466 at 120°. For the best expressed DTT reconstruction image, it showed the longest connectivity in the straight line as we hypothesized. In addition, when comparing the FA values and ADC values of fiber tissues of stem of garlic and asparagus, FA value was generally higher in stem of garlic and ADC value was slightly higher in asparagus.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.16 no.5
• /
• pp.93-106
• /
• 2006

With the rapid growth of the wireless Internet communication, a new generation of mobile devices have made possible the broad distribution of mobile digital contents, such as image, music, video, games and applications over the wireless Internet. Mobile devices are rapidly becoming the major means to extend communication channels without copy Protection, usage rule controlling and authentication. As a result, mobile digital contents may be illegally altered, copied and distributed among unauthorized mobile devices. In this paper, we take a look at Open Mobile Alliance (OMA) DRM v2.0 in general, its purpose and function. The OMA is uniquely the focal point for development of an open standard for mobile DRM. Next we introduces features for an active content and illustrates the difference between an active content and an inactive content. Enabling fast rendering of an active content, we propose an OMA-based DRM framework. This framework include the following: 1) Extending DCF Header for supporting an selective encryption, 2) Content encryption key management, 3) Rendering API for an active content. Experimental results show that the proposed framework is able to render an active content fast enough to satisfy Quality of Experience. %is framework has been proposed for a mobile device environment, but it is also applicable to other devices, such as portable media players, set-top boxes, or personal computer.