• 한국통신학회논문지
• /
• 제30권3C호
• /
• pp.92-101
• /
• 2005

카메라를 통한 객체의 움직임검출은 불필요한 잡음이나 조명의 변화에 따라 정확한 움직임검출 하는 것은 어렵다. 또한 객체의 유입 후 일정시간 동안 움직임이 없을 경우에는 배경으로 인식될 수도 있다. 본 논문에서는 초기의 배경영상을 기준으로 입력영상과의 차를 구하고 시간에 따라 변화하는 배경영상을 N×M 픽셀 마스크만큼 교체하여 갱신한다. 이미지 픽셀 검사는 모든 픽셀을 연산에 참여시키지 알고 일정한 간격의 그물형으로 이미지의 픽셀을 검색하여 보다 효과적으로 움직임을 검출한다. 또한 픽셀검사를 통하여 검출된 객체의 윤곽점을 이용하여 객체의 최소영역을 설정하여 객체의 움직임을 검출하므로, 매 프레임마다 이미지 검사를 하지 않고도 빠르고 정확하게 움직임 검출이 가능하다. 설계하고 구현한 시스템은 실험을 통한 성능평가에서 90% 이상의 높은 정확도를 보였다.

• 한국컴퓨터정보학회논문지
• /
• 제23권11호
• /
• pp.1-7
• /
• 2018

In this paper, we propose soft dead pixels detection method by analysing different response at hot and cold images. Abnormal pixels are able to effect detecting a small target. It also makes confusing real target or not cause of changing target size. Almost exist abnormal pixels after image signal processing even if dead pixels are removed by dead pixel compensation are called soft dead pixels. They are showed defect in final image. So removing or compensating dead pixels are very important for detecting object. The key idea of this proposed method, detecting dead pixels, is that most of soft deads have different response characteristics between hot image and cold image. General infrared cameras do NUC to remove FPN. Working 2-reference NUC must be needed getting data, hot & cold images. The way which is proposed dead pixel detection is that we compare response, NUC gain, at each pixel about two different temperature images and find out dead pixels if the pixels exceed threshold about average gain of around pixels.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2013년도 춘계학술발표대회
• /
• pp.215-218
• /
• 2013

In this paper, we proposed a method for enhancement of color images with sky regions. The input image is converted into HSV space and then sky and non-sky regions are separated. For sky region, saturation enhancement is performed for each pixel based on the enhancement factor calculated from the average saturation of its local neighborhood. On the other hand, for the non-sky region, the enhancement is applied only on the luminance value (V) component of the HSV color image, which is performed in two steps. The luminance enhancement, which is also called as dynamic range compression, is carried out using nonlinear transfer function. Again, each pixel is further enhanced for the adjustment of the image contrast depending upon the center pixel and its neighborhood pixel values. At last, the original H and V component image and enhanced S component image for the sky region, and original H and S component image and enhanced V component image for the non-sky region are converted back to RGB image.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권9호
• /
• pp.3286-3301
• /
• 2014

Jung and Yoo proposed the first image interpolation-based reversible data hiding algorithm. Although their algorithm achieved superior interpolation results, the embedding capacity was insufficient. Lee and Huang proposed an improved algorithm to enhance the embedding capacity and the interpolation results. However, these algorithms present limitations to magnify the original image to any resolution and pixels in the boundary region of the magnified image are poorly manipulated. Furthermore, the capacity and the image quality can be improved further. This study modifies the pixel mapping scheme and adopts a bilinear interpolation to solve boundary artifacts. The modified reference pixel determination and an optimal pixel adjustment process can effectively enhance the embedding capacity and the image quality. The experimental results show our proposed algorithm achieves a higher embedding capacity under acceptable visual distortions, and can be applied to a magnified image at any resolution. Our proposed technique is feasible in reversible data hiding.

• 센서학회지
• /
• 제27권6호
• /
• pp.357-361
• /
• 2018

This paper presents an averaging current adjustment technique for reducing the pixel resistance variation in a bolometer-type uncooled infrared image sensor. Each unit pixel was composed of an active pixel, a reference pixel for the averaging current adjustment technique, and a calibration circuit. The reference pixel was integrated with a polysilicon resistor using a standard complementary metal-oxide-semiconductor (CMOS) process, and the active pixel was applied from outside of the chip. The averaging current adjustment technique was designed by using the reference pixel. The entire circuit was implemented on a chip that was composed of a reference pixel array for the averaging current adjustment technique, a calibration circuit, and readout circuits. The proposed reference pixel array for the averaging current adjustment technique, calibration circuit, and readout circuit were designed and fabricated by a $0.35-{\mu}m$ standard CMOS process.

• 한국축산시설환경학회지
• /
• 제7권3호
• /
• pp.183-190
• /
• 2001

본 연구는 영상처리를 통한 보다 간편하고 정확한 젖소의 체중측정을 위해 수행되었다. 카메라와 개인용 컴퓨터를 이용하여 젖소의 영상을 받은 후 이의 화소 값들을 이용하였으며, 또한 여러 가지 방법으로 체중과의 관계를 회귀분석 방법을 하였다. 1. 본 실험의 결과 다중회귀식에 의한 계산체중, 화소표면적, 부피와 체증과의 상관계수는 각각 0.9424, 0.9439, 0.9651로 나타났으며, 젖소의 체중과 상관관계도가 높았다. 2. 실험에 이용된 젖소의 개체수를 50두이었지만, 각각 상태별 체형의 차이고 인하여 일관된 회귀식을 적용하기에는 정확도 문제에서 다소 문제가 있었다. 그래서 각 개체군으로 나누어서 연구할 필요가 있을 것으로 판단되었다. 3. 젖소의 체중 계측시간은 10초에 불과하지만 실험장치까지의 유도과정은 편균 한 마리에 10분 정도가 소요되었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.153-156
• /
• 2002

We have developed a pixel structure for reflective color TFT-LCD which can display 27-color in still-image. The proposed pixel can display 3 gray scale in still image; white, black and median gray. This paper shows the concept and the driving method of the proposed pixel. Finally this paper compares power consumption and area with the Toshiba's DMOG technology.

• 항공우주기술
• /
• 제8권1호
• /
• pp.58-65
• /
• 2009

본 논문은 검출기의 포화과정을 반영한 비선형 모델의 잡음 특성을 분석하고, 그러한 분석결과를 영상 신호-잡음비(Image SNR)의 분포도를 계산하기위하여 적용한다. 특별히, 검출 화소의 비선형성은 잡음분포(PDF)의 비대칭성과 화소 신호-잡음비(Pixel SNR)의 증폭이라는 두 가지 관점에서 분석되며, 제안된 영상 신호-잡음비 분포도를 이용하여 위성의 발사 후에 카메라 이득의 변화나 기타 상황에서도, 궤도상에서 최적의 위성 카메라 운영 변수들(노출시간, 누적횟수)을 얻을 수 있음이 주요한 특징으로 강조된다.

• 센서학회지
• /
• 제29권2호
• /
• pp.123-127
• /
• 2020

In this paper, the estimation of the disparity for depth extraction in monochrome complementary metal-oxide-semiconductor (CMOS) image sensors with offset pixel apertures is presented. To obtain the depth information, the disparity information between two different channel data of the offset pixel apertures is required. The disparity is caused by the difference in the response angle between the left- and right-offset pixel aperture images. A depth map is implemented by the generated disparity. Therefore, the disparity is the most important factor for realizing 3D images from the designed CMOS image sensor with offset pixel apertures. The disparity is influenced by the pixel height and offset value of the offset pixel aperture. To confirm this correlation, the offset value is set to maximum within the pixel area, and the disparity values corresponding to the difference in the heights are calculated and compared. The disparity is derived using the camera-lens formula. Two monochrome CMOS image sensors with offset pixel apertures are used in the disparity estimation.

• Journal of the Optical Society of Korea
• /
• 제16권1호
• /
• pp.29-35
• /
• 2012

We propose a subpixel scale elemental image generation method to correct the errors created by finite display pixel size in integral imaging. In this paper, two errors are mainly discussed: pickup-and-display mismatch error and mismatch error between pixel pitch and lens pitch. The proposed method considers the relative positions between lenses and pixels in subpixel scale. Our proposed pickup method calculates the position parameters, generates an elemental image with pixels completely inside the lens, and generates an elemental image with border pixels using a weighted sum method. Appropriate experiments are presented to verify the validity of the proposed method.