• 펄프종이기술
• /
• 제34권2호
• /
• pp.13-21
• /
• 2002

A new method for measuring fiber length and fiber coarseness was developed using image analysis technique. Measured fibers were transferred to a glass slide on a filter paper placed on a wire of the laboratory paper machine. After staining the fibers on the slide, mean fiber lengths and coarseness were measured by a commercial image analysis software, named KS400. The resultant data obtained from the image analysis displayed a close correlation with those from FS-200 and also showed excellent reproducibility as well as those from FS-200. The length of synthetic fibers over 10 mm long could be readily measured by this new analysis technique. Finally, a substantial improvement in precision for measuring fiber length and coarseness was made with less operator's effort for a given time.

• 대한의용생체공학회:의공학회지
• /
• 제21권4호
• /
• pp.419-431
• /
• 2000

본 논문에서는 디지털 스캔 컨버터(DSC, digital scan converter)에 의한 왜곡이 근본적으로 발생하지 않는 새로운 초음파 영상 방법으로서 표시장치의 화소에 직접 수신 집속하는 기법(DPBF, display-pixel-based focusing)과 이를 구현하기 위한 초음파 영상 장치의 구조를 제안한다. 제안한 기법은 극 좌표에 위치하는 샘플링 점들 대신에 직각좌표상의 화소들에 직접 수신 집속 함으로써 DSC의 역할을 제거하였다. DPBF 기법을 적용한 영상에는 DSC에 의한 허상 및 구획화 현상 등이 나타나지 않으며, 일반적인 방법에 의한 영상에 비해 보다 세밀한 영상을 제공한다는 사실을 검증할 수 있었다. 본 논문은 DSC에 의한 보간 효과가 두 개의 비교 영상 A, B 간에 미치는 정도를 정량적으로 평가하기 위해서 영상거침 비(ICRA/B, Image Coarseness Ratio)를 새로운 성능 측정 방법으로 정의하였다. 이 ICRA/B를 이용하여 비교 영상간 거친 정도를 정량적으로 측정하였다.

• 한국축산식품학회지
• /
• 제38권3호
• /
• pp.606-614
• /
• 2018

It is important to understand how marbling traits and tenderness differ among beef steaks from the carcass grading site and other regions within the longissimus thoracis (LT) muscle, as these characteristics are closely associated with consumer acceptability and willingness to purchase. Thus, the aim of this study was to compare the marbling fleck traits and objective tenderness parameters in the groups classified by the coarseness index (CI) of marbling fleck (high and low groups) at the carcass grading site ($13^{th}$ thoracic vertebra; 13T) and three different locations (13T, 9T, and 6T) within the LT muscle from well-marbled (marbling score 7 to 9) Hanwoo steer. Image analysis showed that the longitudinal locations had a significant effect on marbling fleck traits. The total area of large marbling fleck divided by the total marbling area (coarseness) was higher at the central region (13T to 12T) compared to the front thoracic region (6T to 5T) in the high CI group (0.23 vs. 0.17, p<0.05), whereas no significant differences were observed in the total number of marbling fleck within the LT muscle in the high or low CI groups (p>0.05). Location effect on objective tenderness parameters within the LT muscle was somewhat limited, although the high CI group had a lower Warner-Bratzler shear force (WBS) value than did the low group (p<0.05). Taken together, the degree of coarseness of marbling fleck decreased from the carcass grading site to the front thoracic site, whereas the objective tenderness parameters, including WBS and hardness, of the grading site did not differ from the other regions within the LT muscle.

• Geomechanics and Engineering
• /
• 제15권3호
• /
• pp.811-822
• /
• 2018

Chip size distribution can be used to evaluate the cutting efficiency and to characterize the cutting behavior of rock during cutting and fragmentation process. In this study, a series of linear cutting tests was performed to investigate the effect of cutting conditions (specifically cut spacing and penetration depth) on the production and size distribution of rock chips. Linyi sandstone from China was used in the linear cutting tests. After each run of linear cutting machine test, the rock chips were collected and their size distribution was analyzed using a sieving test and image processing. Image processing can rapidly and cost-effectively provide useful information of size distribution. Rosin-Rammer distribution pamameters, the coarseness index and the coefficients of uniformity and curvature were determined by image processing for different cutting conditions. The size of the rock chips was greatest at the optimum cut spacing, and the size distribution parameters were highly correlated with cutter forces and specific energy.

• 한국컴퓨터그래픽스학회논문지
• /
• 제4권1호
• /
• pp.41-46
• /
• 1998

현재와 같이 그래픽을 기반으로 하는 멀티미디어 환경에서 이미지 데이터의 압축과 재생을 위한 이미지 처리 기법은 생성되는 커다란 크기의 데이터 처리를 고려해야 한다. 이를 위하여 여러 가지 기법이 제안되었고 Wavelet과 JPEG등과 같은 기법으로 바람직한 결과를 얻었다. 본 논문에서는 기존의 supremum metric보다 효과적인 root mean square metric에 대하여 연구하였고 이를 수학적으로 비교, 검증하였다.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1995년도 추계학술대회
• /
• pp.177-182
• /
• 1995

Since one property(i.e. coarseness, orientation, regularity, granularity etc.) of ultrasound liver images was not sufficiently enough to classify the characteristics of livers, we used the multi-feature vectors from ultrasound images to diagnose the liver disease. The proposed classifier, which uses the multi-feature vectors and Bayes decision rule, performed well for the classification of normal, fat and cirrhosis liver. In our simulation, we used the Battacharyya distance and Hotelling Trace Criterion to select the best multi-feature vectors for the classifier and obtained less classification errors than other methods using single feature vector.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.38-40
• /
• 2007

In this paper, we propose a novel architecture, which is based on DCT (Discrete Cosine Transform), for ME (Motion Estimation) and MC (Motion Compensation). The traditional algorithms of ME and MC based on DCT did not suffer the advantage of the coarseness of the 2-dimensional DCT (2-D DCT) coefficients to reduce the operational time. Therefore, we derive a recursion equation for transform-domain ME and MC and design the structure by using highly regular, parallel, and pipeline processing elements. The main difference with others is removing the IDCT block by using to transform domain. Therefore, the performance of our algorithm is more efficient in practical image processing such as DVR (Digital Video Recorder) system. We present the simulation result which is compare with the spatial domain methods. it shows reducing the calculation cost. compression ratio. and peak signal to noise ratio (PSNR).

• 한국축산식품학회지
• /
• 제39권1호
• /
• pp.151-161
• /
• 2019

The objective of this study was to investigate the correlations of marbling characteristics, including marbling score, intramuscular fat (IMF) content, and fleck traits, with meat quality traits and histochemical characteristics of the longissimus thoracis muscle from Hanwoo steers. Marbling fleck characteristics, especially area, number, and fineness (F) index, measured by computerized image analysis were strongly correlated with marbling score and IMF content (p<0.05). However, coarseness (C) index and F/C ratio were somewhat limited relationships with marbling score. In contrast, the IMF content and the number of smaller white flecks increased with increasing lightness value (p<0.05). Moreover, beef with higher marbling scores showed lower cooking loss and Warner-Bratzler shear force value compared to beef with lower marbling scores (p<0.05). Regarding the muscle bundle traits, as number of bundle increased, number of marbling flecks increased (p<0.05), although most marbling characteristics did not have significant correlation with muscle fiber or bundle characteristics.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제6권9호
• /
• pp.2170-2190
• /
• 2012

There are nowadays strong demands for intelligent surveillance systems, which can infer or understand more complex behavior. The application of crowd density estimation methods could lead to a better understanding of crowd behavior, improved design of the built environment, and increased pedestrian safety. In this paper, we propose a new crowd density estimation method, which aims at estimating not only a moving crowd, but also a stationary crowd, using images captured from surveillance cameras situated in various public locations. The crowd density of the moving people is measured, based on the moving area during a specified time period. The moving area is defined as the area where the magnitude of the accumulated optical flow exceeds a predefined threshold. In contrast, the stationary crowd density is estimated from the coarseness of textures, under the assumption that each person can be regarded as a textural unit. A multilayer neural network is designed, to classify crowd density levels into 5 classes. Finally, the proposed method is experimented with PETS 2009 and the platform of Gangnam subway station image sequences.

• 한국멀티미디어학회논문지
• /
• 제21권2호
• /
• pp.147-157
• /
• 2018

Alzheimer's disease has the significant factors for the both specific and characteristic features according to the disease progressing that are the volumetry and surface area by the brain hippocampus shrinking and thinning. However, we have suggested a shape analysis to calculate the variance by the roughness, coarseness or uneven surface on 3D MR images. For the reasons we have presented two methods: the first method is the distance calculation from major axis to edge points and the second method is the distance calculation from centroidal point to edge points on a coronal plane. Then we selected the shortest distance and the longest distance in each slice and analyzed the ANOVA and average distances. Consequently we obtained the available and great results by the longest distance of the axial and centroidal point. The results of average distances were 44.85(AD), 45.04(MCI) and 49.31(NC) from the axial points and 39.30(AD), 39.58(MCI) and 44.78(NC) from centroidal points respectively. Finally the distance variations for the easily recognized visualization were shown by the color mapping. This research could be provided an indicator of biomarkers that make diagnosis and prognosis the Alzheimer's diseases in the future.