• Journal of Advanced Marine Engineering and Technology
• /
• 제38권9호
• /
• pp.1163-1169
• /
• 2014

$CO_2$ 가스 기포 탐지 기술 개발을 위한 예비연구로 인위적으로 발생시킨 수층의 $CO_2$ 가스 기포 플룸을 다중빔음향측심기, 단일빔음향측심기 그리고 천부지층탐사기(SBP)를 이용해서 탐지 비교하였다. 인위적으로 발생시킨 기포의 상승속도는 가스 탱크에서 압축된 가스의 강제적인 누출이 영향을 미쳐 기존 자료보다 높게 나타나는 것으로 판단된다. 다중빔음향측심기는 단일빔 음향장비에 비하여 넓은 범위를 탐지할 수 있고 가스 누출 위치 및 수층에서 가스 플룸의 3차원적인 정보를 제공하고 있다. 따라서 다중빔음향측심기는 단일빔의 음향장비 보다 더 뚜렷한 가스 플룸을 탐지할 수 있으나, 상호보완적으로 동시에 운영하면 보다 효과적인 탐지기술을 확립할 수 있다. 향후, 본 연구는 특정가스의 음향학적 특징을 파악하여 정량적, 정성적 탐지 기술 향상에 기여하고자 한다.

• 한국음향학회지
• /
• 제39권3호
• /
• pp.151-162
• /
• 2020

본 논문에서는 음향 역산법을 이용한 기포의 크기 분포 추정 기법을 제시하였다. 제 1종 Fredholm 적분방정식으로 표현된 감쇠계수의 추정오차를 목적함수로 정의하였고, 최적해를 구하기 위해 Levenberg-Marquardt(LM)기법을 적용하였다. 두 가지의 기포 분포에 대한 수치 시뮬레이션을 통해 제안된 역산 기법의 유용성을 검증하였다. 세 종류의 기포발생기를 이용하여 사각 수조(1.0 m × 0.54 m × 0.6 m)에서 기포 실험을 수행하였다. 고속카메라 촬영을 통해 기포의 분포 이미지를 획득하였고, 음원과 수중청음기를 이용하여 기포층의 주파수별 삽입손실(insertion loss)을 계측하였다. 촬영된 이미지는 후처리를 통해 기포 발생기별 기포 분포 특성을 파악하는데 활용하였고, 계측된 삽입손실에 역산 기법을 적용하여 기포의 크기 분포를 추정하였다. 음향 역산결과로부터 기포의 크기가 작아짐에 따라 기포 개수는 지수적으로 증가하며, 70 ㎛ ~ 120 ㎛의 국부 피크를 지난 후 다시 증가하는 경향성을 확인하였다.

• 한국방사선학회논문지
• /
• 제11권7호
• /
• pp.571-578
• /
• 2017

원자로 내 사고발생 시 냉각수의 비등으로 기포가 발생하고, 기포율을 측정하기 위하여 열수력 안전 분야에서는 주로 Optical Fiber Probe(OFP)나 광학 카메라를 이용하여 측정하지만 기하학적 구조의 한계로 인해 $17{\times}17$ 배열의 봉 다발 내에 장비를 설치하는 것에는 어려움이 있다. 본 연구는 예비 연구로서 봉 다발에 적용하기 전 X선 시스템과 다양한 모사 팬텀을 이용하여 연구 가능성 평가를 수행하였다. 라디오그라피 및 토모그라피 실험을 통해 X선 발생 장치의 관전압 130 kVp, 관전류 1 mA가 적합하였다. 또한, 기포 해상도 팬텀을 통해 가시적으로 1 mm 크기의 구멍에 대해 측정이 가능하였으며 막대 팬텀을 이용한 대조도 평가의 경우 프레온 내부에서 대조도가 상대적으로 떨어짐을 확인할 수 있었다. 그러나 영상 재구성 시 일그러짐이 없는 좋은 영상을 획득할 수 있었다. 기포 발생 팬텀 실험을 통해 기포의 유동 방향 확인 및 단층 영상을 획득할 수 있었고, Image J 툴을 이용하여 하나의 단층영상에 대해 18 %의 기포율을 측정할 수 있었다. 본 연구는 핵연료 주변 기포율 측정을 위한 선행 연구를 수행하였고 지속적인 연구를 위한 기초 연구로서 활용할 수 있을 것이다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제21권6호
• /
• pp.46-55
• /
• 2016

This experimental study was aimed to estimate interfacial tension of brine-$CO_2$ by using a pendant bubble method and image analysis. Measurements were performed for wide ranges of temperatures, pressures, and salinities covering reservoir conditions in Pohang basin, a possible candidate for $CO_2$ storage operation in Korea. The profiles of $CO_2$ bubbles in brine obtained from image analysis with the densities of brine and $CO_2$ from previous studies were applied to Laplace-Young equation for calculating interfacial twnsion in brine-$CO_2$ system. The experimental results reveals that the interfacial tension is significantly affected by reservoir conditions such as pressure, temperature and water salinity. For conditions of constant temperature and water salinity, the interfacial tension decreases as pressure increases for low pressures (P < $P_c$), and approaches to a constant value for high pressures. For conditions of constant pressure and water salinity, the interfacial tension increases as temperature increases for T < $T_c$, with an asymptotic trend towards a constant value for high temperatures. For conditions of constant pressure and temperature, the interfacial tension increases with increasing water salinity. The trends in changes of interfacial tension can be explained by the effects of the reservoir conditions on the density difference of brine and $CO_2$, and the solubility of $CO_2$ in brine. The information on interfacial tensions obtained from this research can be applied in predicting the migration and distribution of injecting and residual fluids in brine-$CO_2$-rock systems in deep geological environments during geological $CO_2$ sequestrations.

• 천문학회보
• /
• 제37권1호
• /
• pp.79.1-79.1
• /
• 2012

We present here $UBVI$ and H${\alpha}$ photometric results of stellar sources in the bubble nebula NGC 7635. The early type members are selected from the photometric membership criteria. H${\alpha}$ photometry allows us to detect 11 pre-main sequence candidates with H${\alpha}$emission. In addition, we performed PSF photometry for the Spitzer IRAC and MIPS 24${\mu}m$ images from archive (program ID 20726, PI: J. Hester) in order to search for the young stellar objects (YSOs). Total 19 sources are classified as YSOs (7 class I, 11 class II, and 1 transitional disk candidates) in the color-color diagrams according to the classification scheme of Gutermuth et al.. Among them, 7 YSOs have counterparts in optical photometric data. These stars can be divided into two groups at given color indices. It implies that there occurred the star formation events more than twice. We would like to discuss the star formation history in the bubble nebula using the results from SED fitter (Robitaille et al.), color composite image from IRAC bands, and spatial distribution of early type stars and YSOs.

• 한국가시화정보학회지
• /
• 제6권2호
• /
• pp.14-19
• /
• 2008

In this paper, the recirculation flow motion and mixing characteristics driven by air bubble flow in a rectangular water tank is studied. The Time-resolved PIV technique is adopted for the quantitative visualization and analysis. 532 nm Diode CW laser is used for illumination and orange fluorescent particle images are acquired by a PCO 10bit high-speed camera. To obtain clean particle images, 545 nm long pass optical filter and an image intensifier are employed and the flow rates of compressed air is changed from 2 l/min to 4 l/min at 0.5 MPa. The recirculation and mixing flow field is further investigated by the POD analysis technique. It is observed that the large scale counterclockwise rotation and main vortex is generated in the upper half depth from the free surface and one quarter width from the sidewall. When the flow rates are increased, the main vortex core is moved to the side and bottom wall direction.

• 한국해양공학회지
• /
• 제32권2호
• /
• pp.77-83
• /
• 2018

In this study, a series of experiments were performed to investigate the variations in the behavior of green water generation and the flow kinematics of bubbly flow on deck with various flare angles. The experiments were conducted in a 2-D wave flume using a simplified model of a BW Pioneer FPSO operating in the Gulf of Mexico, with a 100-year return period wave condition. The green water phenomena were captured with a high speed CCD camera. The variations in the behavior of the green water generation were investigated with various flare angles, and the horizontal mean velocity profiles of bubbly flow on deck obtained using bubble image velocimetry (BIV) were provided. The differences in flow kinematics of bubbly flow on deck were analyzed with various flare angles.

• 한국가시화정보학회지
• /
• 제14권2호
• /
• pp.52-60
• /
• 2016

The Passive Auxiliary Feedwater System(PAFS) is one of the advanced safety concepts adopted in the Advanced Power Reactor Plus(APR+). To validate the operational performance of the PAFS, detailed understanding of a boiling heat transfer on horizontal tube outside is of great importance. Especially, in the mechanistic boiling heat transfer model, it is important to visualize the phenomena but there are some limitations with conventional experimental approaches. In the present study, we devised a heater based on the Flexible Printed Circuit Board (FPCB) for a more comprehensive visualization and subsequently, a digital image processing technique for the bubble motion measurement was established. Using the measurement technique, important parameters of the nucleate boiling are analyzed.

• 대한조선학회논문집
• /
• 제42권6호
• /
• pp.559-565
• /
• 2005

As the wave impinges on and overtops the structure, a large highly aerated region is created in front of the structure and water splashs on top of the structure. The broken wave in front of the structure and associated green water on top of the structure are highly aerated containing not only a large number of bubbles but also very large sizes of bubbles. In this paper, the velocity field of the highly aerated region and the splashing water on the top is measured using a modified PIV method incorporating the traditional PIV method with the shadowgraphy technigue by correlating the ' texture ' of the bubble images. The velocity fields of a plunging wave impacting on a structure in a two-dimensional wave flume is measured. It is found that the maximum fluid particle velocity in flout of the structure during the impinging process is about 1.5 times the phase speed of the wave, while the maximum horizontal velocity above the top is less than the phase speed, It is also found that the dam breaking solution does not work well in predicting the green water velocity.

• 대한금속재료학회지
• /
• 제48권10호
• /
• pp.893-900
• /
• 2010

In the present work, the impact loads and their effects on the surface damage under the simultaneous cavitation bubble and solid particle collapses in the sea water have been quantitatively investigated for the austenitic 304 stainless steel by using a vibratory cavitation test device. To do this, angular $SiO_2$ solid particles with an average size of $150{\mu}m$ were dispersed into the test liquid, and the measured impact amplitudes were converted into the impact loads by a steel ball drop test. The maximum impact load was determined to be 28.2 N in the absence of solid particles, but increased to 33.7 N in the presence of solid particles. In addition, the critical impact loads, $L_{crit}$, required to generate pits with sizes greater than $3{\mu}m$ were measured to be 19.6 N and 16.6 N, respectively, for the cavitation bubble collapse and solid particle collapse. As a result of the cavitation erosion test, the incubation time and erosion rate were 1.2 times lower and 1.5 times higher, respectively, by a solid particle collapse compared to those only by the cavitation bubble collapse, indicating a drastic decrease in a resistance to cavitation erosion by the solid particle collapse.