• Proceedings of the KOSOMBE Conference
• /
• v.1991 no.11
• /
• pp.44-47
• /
• 1991

There exists a transform trellis code that is optimal for stationary Gaussian sources and the squared-error distortion measure at all rates. In this paper, we train an asymptotically optimal version of such a code to obtain one which is matched better to the statistics of real world data. The training algorithm uses the M-algorithm to search the trellis codebook and the LBG-algorithm to update the trellis codebook. To adapt the codebook for the varying input data. we use two gain-adaptive methods. The gain-adaptive scheme 1, which normalizes input block data by its gain factor, is applied to images at rate 0.5 bits/pixel. When each block is encoded at the same rate, the nonstationarity among the block variances leads to a variation in the resulting distortion from one block to another. To alleviate the non-uniformity among the encoded image, we design four clusters from the block power, in which each cluster has its own trellis codebook and different rates. The rate of each cluster is assigned through requiring a constant distortion per-letter. This gain-adaptive scheme 2 produces good visual and measurable quality at low rates.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.23 no.2
• /
• pp.143-159
• /
• 2005

The printing could not expect the print effect of the specific character of a printing material. Specially, a property of the paper that we are aware of the substrate has controled printability as well as run ability. The objective of this study was to measure substrate properties by measuring the water receptivity in order to know the degree of the uniformity on surface of paper. Therefore, the water receptivity was measured by fluid bridge method. And then the physical properties of samples such as ink set-off, porosity and print mottle of domestic coated papers were measured by Tappi method. Accordingly, this study obtained the outcome of water receptivity. And then we could know that the relations between water receptivity and physical properties of the paper samples have correlations. There are many measurement equipments to find out print mottle by the measurement of the reflected density at this point in time. However, it is thought that the fluid bridge method is the most proper way to find out print mottle, though there are many other ways to figure out.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.28 no.2
• /
• pp.101-116
• /
• 2010

Last printing market is changing to high-quality color prints for web offset printing. But, color image reproduction based on the relative sheet-ped printing compared to the way, web offset printing are falling. Moreover, it's difficult to maintain the quality of the web offset print. The reason is the worker's decision to rely on. Therefore, the quality of prints was no difference in uniformity and objectivity. We have thought the reason, that the physical properties of inks such as fluidity, viscosity and tack. In addition, varies depending on the physical properties of paper, such as thickness, smoothness, roughness and porosity. Therefore, we studied the properties of ink and paper on the relations between the properties used IGT printability tester. This study of domestic web offset printing inks and papers on the relationship between physical properties and printability were studied. So, to improve printability will be used as the basis resources for web offset printing.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.28 no.2
• /
• pp.31-44
• /
• 2010

Ever since the introduction of offset lithography, an operator have looked for ways to improve the process by reducing need for dampening solution. Lithography like off-set printing is processed using the repellent properties between water and oil, so all inks for lithography printing must work with dampening solution. The dampening solution may cause the emulsification of ink by the printing pressure in the printing nip. Emulsified ink changed viscosity, tack and causes problems such as bad transfer, uniform density and printed mottle. For a high quality web printing, we studied the effect of emulsified heat-set web inks on the printability, such as amount of ink transfer, printed density and uniformity. For this study, we were carried out by using IGT printability tester C1. For determination of ink properties using the spread meter and Thwing Albert Ink-o-meter, and using the densitometer and image analysis for printed quality determination. The experimental results of this study, we look forward to can be used as the basis for improve of the web print quality.

• Journal of architectural history
• /
• v.19 no.6
• /
• pp.79-98
• /
• 2010

If we take account of the 'Architectural Tradition' which aims a construction of better environment, we can see that this tradition has ended historically toward Utopia. And the concrete concepts of utopia mainly started on the Renaissance periods. The Utopias were described well in the literatures which contained particularly three representative utopian books in Renaissance period. The one was the most famous novel by Sir Thomas More and the other were by Tommaso Campanella and by Francis Bacon. These novels expressed ideal commonwealths in which inhabitants exist under perfect conditions, ideally perfect places or state of things. The plans of utopia are complete projects of image, its goal is an political, social and economical improvement according to the eras. Their utopias mostly had characteristics as follows; their shape of islands were almost circle, their shape of cities were rectangularity or circle and attached importance to geometrical compositions, their structure of cities were self-sufficiency in closed spaces and their architectural characteristics were uniformity, simplicity and non-ornament. And these architectural characteristics are urban and architectural traditions in communist countries. Also their utopian novels had not much explanations to daily lives of people like as birth, death, relative, mental conflict or authority, money, art. So their utopian novels were not practical and had inappropriate aspects.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.05a
• /
• pp.269-272
• /
• 2008

LGP is a key component of LCD back light unit because it determines the brightness and sharpness of display image. Usually, it has optical patterns fabricated on the bottom surface. In the present paper the LiGA-reflow method was applied to fabricate the LGP mold. Furthermore, the optical simulation considering the replication ratio of pattern height was applied to the pattern design. The optical simulation through systematic correction scheme helped find the optimum distribution of pattern density. Finally, the stamper fabricated by this method was installed in the mold and LGP was produced by injection molding. As a result of luminance measurement for the final product, the average luminance and luminance uniformity was measured 3,180 nit and 84%, respectively. Consequently, the mold fabrication method using the LiGA-reflow and optical simulation(CAE) can save the expense and time compared with the existing fabrication methods(laser ablation and chemical etching).

• Korean Journal of Remote Sensing
• /
• v.35 no.1
• /
• pp.15-28
• /
• 2019

By applying the method of SAR interferometry to X-band synthetic aperture radar (SAR) image of COSMO-SkyMed, detailed motion patterns of five glaciers in the Parlung Zangbo River basin, Tibetan Plateau, in January 2010 have been derived. The results indicate that flow patterns are generally constrained by the valley geometry and terrain complexity. The maximum of $123.9ma^{-1}$ is observed on glacier No.1 and the minimum of $39.4ma^{-1}$ is found on glacier No.3. The mean values of five glaciers are between 22.9 and $98.2ma^{-1}$. Glaciers No.1, No.2, No.4 and No.5 exhibit high velocities in their upper sections with big slope and low velocities in the lower sections. A moraine lake accelerates the speed of mass exchange leading to a fast flow at the terminal of glacier No.3. These glaciers generally move along the direction of decreased elevation and present a macroscopic illustration of the motion from the northwest to the southeast. The accuracy of DEM and registration conditions of DEM-simulated terrain phases has certain effects on calculations of glacier flow direction and velocity. The error field is relatively fragmented in areas inconsistent with the main flow line of the glaciers, and the shape and uniformity of glacier are directly related to the continuous distribution of flow velocity errors.

• Progress in Medical Physics
• /
• v.19 no.2
• /
• pp.102-112
• /
• 2008

We developed a high-resolution micro-CT system based on rotational gantry and flat-panel detector for live mouse imaging. This system is composed primarily of an x-ray source with micro-focal spot size, a CMOS (complementary metal oxide semiconductor) flat panel detector coupled with Csl (TI) (thallium-doped cesium iodide) scintillator, a linearly moving couch, a rotational gantry coupled with positioning encoder, and a parallel processing system for image data. This system was designed to be of the gantry-rotation type which has several advantages in obtaining CT images of live mice, namely, the relative ease of minimizing the motion artifact of the mice and the capability of administering respiratory anesthesia during scanning. We evaluated the spatial resolution, image contrast, and uniformity of the CT system using CT phantoms. As the results, the spatial resolution of the system was approximately the 11.3 cycles/mm at 10% of the MTF curve, and the radiation dose to the mice was 81.5 mGy. The minimal resolving contrast was found to be less than 46 CT numbers on low-contrast phantom imaging test. We found that the image non-uniformity was approximately 70 CT numbers at a voxel size of ${\sim}55{\times}55{\times}X100\;{\mu}^3$. We present the image test results of the skull and lung, and body of the live mice.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.21 no.2
• /
• pp.31-36
• /
• 2017

Purpose Recently, the performance of PET/CT scanner has been improved and various techniques have been developed to increase the image quality such as Sensitivity and Resolution. The purpose of this study is to evaluate the usefulness of Q.Clear (a fully convergent iterative reconstruction) technique of GE Discovery IQ equipment to enhance the image quality. Materials and Methods All scans were acquired by Discovery IQ (GE Healthcare, MI, USA). In NEMA IEC Body Phantom test, Background to Hot-sphere (10 mm, 13 mm, 17 mm, 22 mm) ratio was 1:4 and scan time was 3 minutes. The images were reconstructed by VPHDs (VUE Point High-Definition + SharpIR) and Q.Clear to evaluate each Contrast. We injected 18F-FDG 187 M㏃ to PET/SPECT Performance Phantom. And then it was scanned for 4 minutes to evaluate Resolution and Uniformity. T-test statistical analysis was performed on SUVmax of small lesions less than 2 cm in 100 clinical patients regardless of disease type. Results In the NEMA IEC Body Phantom, the Contrast was $63.6{\pm}5.7%$ (VPHDs) and $75{\pm}4.8%$ (Q.Clear). In the PET/SPECT Performance Phantom, the Resolution was 9.2 mm (VPHDs) and 7.3 mm (Q.Clear). Uniformity of Q.Clear was 10.8% better than VPHDs. T-test statistic of the clinical patients showed a significant difference of p value of 0.021. Conclusion Both the phantom test and the clinical results showed that the quality of the image was improved in Q.Clear was applied. The SUVmax was highly measured in Q.Clear and the lesions were clearly distinguished visually. Therefore Q.Clear can be useful in various aspects such as dose-reduction, patients evaluation and image analysis.

• Korean Journal of Remote Sensing
• /
• v.14 no.3
• /
• pp.213-222
• /
• 1998

Electro-Optical Camera(EOC) is the main payload of the KOrea Multi-Purpose SATellite(KOMPSAT) with the mission of cartography to build up a digital map of Korean territory including a Digital Terrain Elevation Map(DTEM). This instalment which comprises EOC Sensor Assembly and EOC Electronics Assembly produces the panchromatic images of 6.6 m GSD with a swath wider than 17 km by push-broom scanning and spacecraft body pointing in a visible range of wavelength, 510~730 nm. The high resolution panchromatic image is to be collected for 2 minutes during 98 minutes of orbit cycle covering about 800 km along ground track, over the mission lifetime of 3 years with the functions of programmable gain/offset and on-board image data storage. The image of 8 bit digitization, which is collected by a full reflective type F8.3 triplet without obscuration, is to be transmitted to Ground Station at a rate less than 25 Mbps. EOC was elaborated to have the performance which meets or surpasses its requirements of design phase. The spectral response, the modulation transfer function, and the uniformity of all the 2592 pixel of CCD of EOC are illustrated as they were measured for the convenience of end-user. The spectral response was measured with respect to each gain setup of EOC and this is expected to give the capability of generating more accurate panchromatic image to the users of EOC data. The modulation transfer function of EOC was measured as greater than 16 % at Nyquist frequency over the entire field of view, which exceeds its requirement of larger than 10 %. The uniformity that shows the relative response of each pixel of CCD was measured at every pixel of the Focal Plane Array of EOC and is illustrated for the data processing.