• Journal of Broadcast Engineering
• /
• v.26 no.3
• /
• pp.247-257
• /
• 2021

This paper proposes a new technique for calibrating a multi-view RGB-D camera using a 3D (dimensional) skeleton. In order to calibrate a multi-view camera, consistent feature points are required. In addition, it is necessary to acquire accurate feature points in order to obtain a high-accuracy calibration result. We use the human skeleton as a feature point to calibrate a multi-view camera. The human skeleton can be easily obtained using state-of-the-art pose estimation algorithms. We propose an RGB-D-based calibration algorithm that uses the joint coordinates of the 3D skeleton obtained through the posture estimation algorithm as a feature point. Since the human body information captured by the multi-view camera may be incomplete, the skeleton predicted based on the image information acquired through it may be incomplete. After efficiently integrating a large number of incomplete skeletons into one skeleton, multi-view cameras can be calibrated by using the integrated skeleton to obtain a camera transformation matrix. In order to increase the accuracy of the calibration, multiple skeletons are used for optimization through temporal iterations. We demonstrate through experiments that a multi-view camera can be calibrated using a large number of incomplete skeletons.

• Design & Manufacturing
• /
• v.15 no.2
• /
• pp.23-29
• /
• 2021

The specific strength of magnesium alloy is four times that of iron and 1.5 times that of aluminum. For this reason, its use is increasing in the transportation industry which is promoting weight reduction. At room temperature, magnesium alloy has low formability due to Hexagonal closed packed (HCP) structure with relatively little slip plane. However, as the molding temperature increases, the formability of the magnesium alloy is greatly improved due to the activation of other additional slip systems, and the flow stress and elongation vary greatly depending on the temperature. In addition, magnesium alloys exhibit asymmetrical behavior, which is different from tensile and compression behavior. In this study, a jig was developed that can measure the plane deformation behavior on the surface of a material in tensile and compression tests of magnesium alloys in warm temperature. A jig was designed to prevent buckling occurring in the compression test by applying a certain pressure to apply it to the tensile and compression tests. And the tensile and compressive behavior of magnesium at each temperature was investigated with the developed jig and DIC equipment. In each experiment, the strain rate condition was set to a quasi-static strain rate of 0.01/s. The transformation temperature is room temperature, 100℃. 150℃, 200℃, 250℃. As a result of the experiment, the flow stress tended to decrease as the temperature increased. The maximum stress decreased by 60% at 250 degrees compared to room temperature. Particularly, work softening occurred above 150 degrees, which is the recrystallization temperature of the magnesium alloy. The elongation also tended to increase as the deformation temperature increased and increased by 60% at 250 degrees compared to room temperature. In the compression experiment, it was confirmed that the maximum stress decreased as the temperature increased.

• Journal of the Korean Society for information Management
• /
• v.39 no.3
• /
• pp.165-193
• /
• 2022

It can be said that digital technology is at the center of the change in the modern work environment. In particular, in general public institutions that prove their work with records produced by business management systems and document production systems, the record management system is also the work environment itself. Gimpo City applied for the 2021 public cloud leading project of the National Information Society Agency (NIA) to proactively respond to the 4th industrial revolution technology era and implemented a public cloud-based AI-OCR technology enhancement project with 330 million won in support of 330 million won. Through this, it was converted into data beyond the limitations of non-electronic records limited to search and image viewing that depend on standardized index values. In addition, a 98% recognition rate was realized by applying a new technology called AI-OCR. Since digital technology has been used to improve work efficiency, productivity, development cost, and record management service levels of internal and external users, we would like to share the direction of enhancing expertise in the record management and implementation of work environment innovation.

• Journal of Service Research and Studies
• /
• v.11 no.2
• /
• pp.21-36
• /
• 2021

This study investigated the means-end chain theory more concretely through the APT hard laddering technique. This is carrying out a questionnaire survey targeting users by hair salon type, and the items drawn from the qualitative laddering technique are applied. The technique is a comparative analysis of each attribute, consequences, and value item by analyzing each step's questions. The results are as follows. First, hairdresser's ability, acceptance of individual-customized opinions, and cheap price were the most mentioned items in the selection attributes. As for the consequences items, image transformation, neatness, novelty, and psychological stability were drawn in order. The items indicated as important among the value items were satisfaction, followed by happiness, confidence, beauty, and bond. Second, the remarkable selection attributes, irrelevant of hair salon type, was revealed as hairdresser's ability and the key values pursued when using a hair salon were drawn as satisfaction, confidence, and beauty. From this result, it was found that meeting the desire of consumers using hair salons can be linked with ultimately pursued values. It was also verified that partial differences were shown by hair salon type and this meant that consumers' desire and expected benefits were different by hair salon type. Although this study drew value perception through comparison with hair salon types based on the means-end chain theory, it was confirmed that the most important selection attribute was hairdresser's ability and they select and use hair salons to gain satisfaction and confidence.

• The Journal of Society for e-Business Studies
• /
• v.27 no.2
• /
• pp.205-218
• /
• 2022

Recently, digital transformation in manufacturing has been accelerating. It results in that the data collection technologies from the shop-floor is becoming important. These approaches focus primarily on obtaining specific manufacturing data using various sensors and communication technologies. In order to expand the channel of field data collection, this study proposes a method to automatically collect manufacturing data based on vision-based artificial intelligence. This is to analyze real-time image information with the object detection and tracking technologies and to obtain manufacturing data. The research team collects object motion information for each frame by applying YOLO (You Only Look Once) and DeepSORT as object detection and tracking algorithms. Thereafter, the motion information is converted into two pieces of manufacturing data (production performance and time) through post-processing. A dynamically moving factory model is created to obtain training data for deep learning. In addition, operating scenarios are proposed to reproduce the shop-floor situation in the real world. The operating scenario assumes a flow-shop consisting of six facilities. As a result of collecting manufacturing data according to the operating scenarios, the accuracy was 96.3%.

• Sim-seong Yeon-gu
• /
• v.26 no.1
• /
• pp.1-35
• /
• 2011

The number of Frida Kahlo's works is 143, 55 of which are her own portraits. She spent a great deal of time on the production of her works, a large portion of which is taken up by her portraits. Art and creation by artist are the expressive process of artist's unconsciousness. Certain works express personal unconsciousness and collective, archetypal unconsciousness. These works evoke certain impressive image or unknown emotion in their mind impulsively. Artist could talk with their own work in this process. The producted symbolic images want to seek harmony with the artist's consciousness. This study has examined, from the viewpoint of analytical psychology, the psychological changes of Frida Kahlo by way of interpreting 4 of her own realistic portraits. These particular 4 works were finished in the most critical life time of Frida Kalho. We tried to find out what the purpose of her work would be. From the examination the following characteristics were gound. 1) Her portraits are not only concerned with her personal life and personal unconscious, but they also contain elements of the collective unconscious. 2) She experienced a psychological healing for herself in the process of transforming shocking events into painful portraits. 3) Her self portraits are the expression of the creative transformation she underwent.

• The Korean Journal of Nuclear Medicine
• /
• v.32 no.5
• /
• pp.414-424
• /
• 1998

Purpose: Cross-modality coregistration of positron emission tomography (PET) and magnetic resonance imaging (MR) could enhance the clinical information. In this study we propose a refined technique to improve the robustness of registration, and to implement more realistic visualization of the coregistered images. Materials and Methods: Using the sinogram of PET emission scan, we extracted the robust head boundary and used boundary-enhanced PET to coregister PET with MR. The pixels having 10% of maximum pixel value were considered as the boundary of sinogram. Boundary pixel values were exchanged with maximum value of sinogram. One hundred eighty boundary points were extracted at intervals of about 2 degree using simple threshold method from each slice of MR images. Best affined transformation between the two point sets was performed using least square fitting which should minimize the sum of Euclidean distance between the point sets. We reduced calculation time using pre-defined distance map. Finally we developed an automatic coregistration program using this boundary detection and surface matching technique. We designed a new weighted normalization technique to display the coregistered PET and MR images simultaneously. Results: Using our newly developed method, robust extraction of head boundary was possible and spatial registration was successfully performed. Mean displacement error was less than 2.0 mm. In visualization of coregistered images using weighted normalization method, structures shown in MR image could be realistically represented. Conclusion: Our refined technique could practically enhance the performance of automated three dimensional coregistration.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.3
• /
• pp.69-80
• /
• 2012

The purpose of this paper was to study the issues related to converting the graveyards within forests into spaces intended for tree burials by means of planting, given the situation that the graveyards have encroached on land and damaged the environment. For the reason, a field survey was performed to determine the width, length, and distance to the nearest tree of 205 graveyards in the capital area. Through this, it was determined that the domestic lands damaged by graveyards amounted to $862km^2$, including the areas that were deforested to manage the graves. This only confirms that land encroachment by graveyards is a serious issue. The methods for making tree burial sites were examined from the perspective of how to meet public demands given the graveyard's spatial distinctiveness. As a result, this study suggested different methods to establish tree burial sites according to the degree of transformation and the term of its formation. This study also classified the graveyards into three types, and identified the planting methods that harmonized the safe growth of trees and the scenic beauty of memorial places based on the standard. This is in order to plant trees that are shade-tolerant and suitable to the forest line, along with which other tree line was and also, to plant aesthetic trees around the empty space. Through applying the developed methods, this study established and monitored two exemplary sites in Yongin and Boryeng. Aesthetic trees were planted in Yongin site which was located in an open area, aod the shade-tolerant trees were planted in Boryeong, which was located in a forest area. As a result, the image of a garden appeared at Yongin site and the image of a tree colony harmonized with the near forest emerged at Boryeong site. Therefore, it is confirmed that the method of planting according to the distribution status of neighboring trees was effective. As a result of monitoring, mulching wood chips were suitable for sites that were small or easy to approach. This is because the weeds were controlled in Yongin site by mulching. Furthermore, by monitoring the growth of 11 species of vegetation, this study confirmed that low and cover-type vegetations were suitable for tree burial sites. In Boryeong site, the wild cherry trees, which were planted as adult trees, all died, and the tilling of snake's beard, which were planted as cover vegetation, was slow. Therefore, this study found that seedlings were more suitable to plant in forest graveyards than adult trees, which were large and difficult to approach, and it was effective to use the remaining lawn and form a low vegetation after the crown of trees had expanded to such places.

• Journal of the Daesoon Academy of Sciences
• /
• v.42
• /
• pp.45-73
• /
• 2022

The phenomenon of veneration for Queen Mother of the West [西王母 Chn: Xiwangmu Kr: Seowangmo] is a 'cultural flow' that has garnered great interest not only in China but also in Korea for many years. To properly understand the cultural trend regarding the Queen Mother of the West, it is essential to view the related mythology as it corresponds to East Asian women as well as the transformation of society's view of women. In addition to the outcomes that result from the establishment of a patriarchal society, the relationship between goddesses and gods gradually becomes a relationship of discrimination based upon differences. Accordingly, as women change into objects that are given meaning rather than subjects that give meaning, the de-sacredization of the goddess occurs. This paper focused on the changes in the perception of the Queen Mother of the West from the view of Yin-Yang theory. This approach shows a transition process of transforming wherein she has morphed into an assistant or spouse of a god as part of a trend that deemphasizes the divinity of her as a stand-alone goddess. Yin-Yang theory is the key to understanding culture, history, and art as well as Chinese philosophy. This key can be further applied to the theme of women in mythology. What is particularly noteworthy about the process by which the Queen Mother of the West was defined as a goddess is that she was original described as half-human and half-beast and yet by the time her depictions became fully human and fully woman, she was described instead as an absolute beauty endowed with great artistic talent. In this paper, it will be revealed that the perception of the Queen Mother of the West, as an absolute beauty and artistic talent, is embedded with the male societal desire for an image of the feminine as understood via Yin-Yang theory. Queen Mother of the West as she was depicted in the Classic of Mountains and Seas (山海經 Chn: Shanhaijing Kr: Sanhaegyeong) had a half-human half-beast form that instilled people with fear of disasters and punishments from heaven. However, in the Han Dynasty, her religious significance became that of an object to ward off evil and attain blessings. By the time of the novel, Tales of the Strange (志怪小說 Chn: Zhiguaixiaoshuo Kr: Jigoesoseol), from the Wei, Jin, Southern and Northern Dynasties, she was transformed into a goddess in the image of beautiful woman in charge longevity and immortality. From the perspective of Yin-Yang theory, the changes in the perception of Queen Mother of the West was found to contain the following meaning: as an extension of the establishment of a patriarchal system and subordinate laws, her new form was made to be pleasing to the male gaze and Yin-Yang theory was brought in to support those changes later.

• The Korean Journal of Nuclear Medicine
• /
• v.39 no.6
• /
• pp.413-420
• /
• 2005

Purpose: Neuroreceptor PET studies require 60-120 minutes to complete and head motion of the subject during the PET scan increases the uncertainty in measured activity. In this study, we investigated the effects of the data-driven head mutton correction on the evaluation of endogenous dopamine release (DAR) in the striatum during the motor task which might have caused significant head motion artifact. Materials and Methods: $[^{11}C]raclopride$ PET scans on 4 normal volunteers acquired with bolus plus constant infusion protocol were retrospectively analyzed. Following the 50 min resting period, the participants played a video game with a monetary reward for 40 min. Dynamic frames acquired during the equilibrium condition (pre-task: 30-50 min, task: 70-90 min, post-task: 110-120 min) were realigned to the first frame in pre-task condition. Intra-condition registrations between the frames were performed, and average image for each condition was created and registered to the pre-task image (inter-condition registration). Pre-task PET image was then co-registered to own MRI of each participant and transformation parameters were reapplied to the others. Volumes of interest (VOI) for dorsal putamen (PU) and caudate (CA), ventral striatum (VS), and cerebellum were defined on the MRI. Binding potential (BP) was measured and DAR was calculated as the percent change of BP during and after the task. SPM analyses on the BP parametric images were also performed to explore the regional difference in the effects of head motion on BP and DAR estimation. Results: Changes in position and orientation of the striatum during the PET scans were observed before the head motion correction. BP values at pre-task condition were not changed significantly after the intra-condition registration. However, the BP values during and after the task and DAR were significantly changed after the correction. SPM analysis also showed that the extent and significance of the BP differences were significantly changed by the head motion correction and such changes were prominent in periphery of the striatum. Conclusion: The results suggest that misalignment of MRI-based VOI and the striatum in PET images and incorrect DAR estimation due to the head motion during the PET activation study were significant, but could be remedied by the data-driven head motion correction.