• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.835-836
• /
• 2006

For non-contact structure vibration displacement measurement system, an algorithm for image processing using high speed CCD camera is introduced. The system sets the target to the structure, take picture using camera and image processing is performed to display the vibration data. The algorithm flow is basic preprocessing, projection data generation and curve fitting to find three crossing points for calibration or one center point in limited area.

• 한국정보통신학회논문지
• /
• 제11권7호
• /
• pp.1341-1347
• /
• 2007

기존의 광류 (Optical flow)는 국소적 처리를 시작점으로 하는 bottom-up수법에 의해서 구하였다. 이에 반해, 본 논문은 영상유체보존식과 함수 전개법에 의해 영상 전체의 움직임을 차수가 낮은 모드로 부터 순차적으로 전개하는 bottom-down수법을 새로운 수법으로 제안한다. 의료 영상에 있어서 명도는 움직임이 있어도 불변으로 유지하려는 경우가 많다. 그러나 이 같은 영상계열에서의 움직임은 좌표 변환에 의해서 대응된다. 본 수법의 경우 광류는 선형모멘트방정식의 함수에 관한 도함수를 이용하는 투영법에 의해서 반복계산으로 구하여 진다. 본 논문에서는 심장의 영상계열을 이용하여 기존의 Horn and Schunck기법, Standard multigrid기법과 본 수법의 알고리즘을 비교 평가하여 유효성을 나타낸다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.503-507
• /
• 2004

This paper is concerned with the measurement of low-frequency vibrations of structures using the image processing method. To measure the vibrations visually, the measurement system consists of a camera, an image grabber board, and a computer. The specific target installed on the structure is used to calculate the vibration of structure. The captured image is then converted into a pixel-based data and then analyzed numerically. The limitation of the system depends on the image capturing speed and the size of image. In this paper, we discuss the methodology for the vibration measurement using the image processing method. The method enables us to measure the displacement directly without any contact. The resolution of the vibration measurement can be refined but limited to the sub centimeter displacement.

• 한국안전학회지
• /
• 제11권2호
• /
• pp.25-32
• /
• 1996

This paper describes an experimental study of growing ductile crack-tip behaviors by means of computer image processing technique and finite element method. Here, the displacement field near a crack-tip is first measured by the computer image processing technique. Combined with the finite element technique, strain and stress fields are evaluated from the measured displacement. Then, crack-tip parameters such as J-integral are evaluated using the obtained displacement, strain and stress fields. The present technique Is applied to a growing crack problem of tensile CT specimen made of 304 stainless steel. The ductile crack growth behaviors accompanied by unloading are discussed in detail through the comparison between the experimental and the theoretical results.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2007년도 춘계학술발표회 논문집
• /
• pp.103-106
• /
• 2007

Recently, production and application of ortho image using high resolution image are increasing by acquired high quality data from development of photogrammetry and IT technology. Generally, An ortho image has some problems that cannot remove completely to relief displacement about cultural feature like building and overpass because of performance rectification using DEM. Therefore, in this study, I generated DSM each of four experiment cases for production of true ortho image which is removed relief displacement of building using digital photogrammetry technique and LiDAR data, presented the plan of DSM production that is appropriate to production true ortho image by analyzing an accuracy after manufacture an ortho image each of DSM.

• 대한기계학회논문집
• /
• 제19권6호
• /
• pp.1382-1390
• /
• 1995

Electronic Speckle Pattern Interferometry (ESPI) with a CW laser, a video system and an image processor was utilized to measure the in-plane displacement. Unlike traditional strain gauges or Moire method. ESPI method measure the in-plane displacement on real time with out any surface preparation on surface attachment. The specimen has a crack of 10*0.1 mm in the middle of plate and strain gauge was also attached on that surface to compare with ESPI method. This study reveled the ESPI method to measure the displacement and distribution of strain in the specimen. It was shown in tensile tests that the measurement by ESPI method was comparable with strain gauge.

• 대한전자공학회논문지
• /
• 제25권7호
• /
• pp.807-818
• /
• 1988

This paper proposes new algorithms for the estimation of displacement vector and moving object extraction using difference picture. First, the relations between the boundary of moving objects in two consecutive image and the boundary of difference picture regions are analyzed, then displacement vector estimation algorithm is proposed. Using the estimated displacement vector, moving objects are directly extracted from difference picture. Since the proposed algorithms do not process gray-valued image, they have a short processing time and are suitable to real time processing. From the experimental results, we observed that, if difference picture is wel extracted, the proposecd algorithms work well even in the circumstances of complex background, fast or slow motion, rotation etc., including occlusion where is not moving area.

• 한국자동차공학회논문집
• /
• 제1권2호
• /
• pp.125-133
• /
• 1993

Electronic Speckle Pattern Interferometry(ESPI) using a CW laser, a video system and image processor was applied to the rotating displacement of rigid body. ESPI require no special surface preparation or attachments and displacements between any two arbitrary points on the surface can be measured. The characteristic speckle pattern formed when imaging a scattering surface illuminated by laser light retains phase information, which can be used for interferometric measurement of surface displacement. The application of this principle to measuring in-plane displacement resolved in one direction is described, together with the novel use of television equipment to detect and process the information contained in the speckle pattern. This is faster, and more convenient and versatile than customary photographic methods.

• 한국정밀공학회지
• /
• 제11권1호
• /
• pp.114-122
• /
• 1994

ESPE(Electonic-Speckle-Pattern-Interferometry) is very useful method for measuring In-plane displacement. Using the CW-Laser and Image processing system, it is possible to measure displacement and strain. Unlike traditional straingauge or moire' method, ESPI method requires no special surface preparation or attachments and can be measured In-plane displacement with no contact and real time. In this experimental specimen was loaded in paralled with loadcell, which provided loading step. The specimen was sheet plate, which was attached straingauge in x-y direction. In this study provides an example of how ESPI has been used to measure two dimensional displacement and strain distribution in this specimen. The results measured by ESPI compare with the data which was measured straingauge method in tensile testing at 1 ton range.

• 화약ㆍ발파
• /
• 제37권4호
• /
• pp.1-9
• /
• 2019

본 연구에서는 지하채광 발파에 따른 암반광주에서의 변위 및 진동을 측정하는 방법을 통해 디지털 이미지 영상상관 기법(DIC)이라는 기술의 적용성을 시험하였다. 디지털 이미지 영상상관 기법은 고속 사진촬영 기술과 접목하면 구조물 또는 대상물의 전면변화 속성을 2차원 또는 3차원 좌표로 변환할 수 있는 우수한 광학영상 처리능력을 제공한다. 이렇게 측정된 좌표들은 구조물이나 대상물의 변위, 변형률, 속도 등을 계산하는 데 사용된다. 이 기술은 과학 및 공학 분야에서 널리 사용되고 있으며, 그 밖의 많은 분야로도 적용성을 확장해 나가고 있다. 본 연구에서는 이와 같은 DIC 시스템과 기존의 진동계측기를 사용하여 발파로 발생된 변위와 진동을 측정함으로써 그 성능을 서로 비교하였다. 현장시험 결과, 두 방법은 비슷한 결과를 보였다. 이로부터 DIC 시스템을 이용한 발파 진동 및 변위 측정에 대한 적용성을 확인할 수 있었다.