• 한국산학기술학회논문지
• /
• 제15권1호
• /
• pp.425-429
• /
• 2014

가시거리는 무엇인지 정확히 보이는 거리로 정의되며 이는 조도, 글자 크기와 시력 등에 따라 달라진다. 본 논문에서는 4가지 글자 크기와 3가지 조도에 대해서 약 120명의 학생들을 대상으로 교실에서 가시거리를 측정하였다. 측정하지 않은 조도에 대한 가시거리를 예상하기 위해서 최소 제곱 근사 이론을 적용하여 조도가 독립변수이고 가시거리가 종속변수인 함수를 만들었다. 조도가 많이 변해도 가시거리는 조금 밖에 변하지 않으므로 상용로그함수를 이용하여 글자 크기 4가지 각각에 대해서 함수를 만들었다. 만들어진 함수의 값과 측정값과의 오차가 매우 적으므로 함수가 잘 만들어졌음을 보였다.

• 조명전기설비학회논문지
• /
• 제16권5호
• /
• pp.1-6
• /
• 2002

박물관의 수장공간은 박물관의 가장 기초적인 기능을 수행하는 핵심 공간의 하나이다. 그럼에도 불구하고 일반적인 사무실이나 공장의 창고로 생각하여 소홀히 다루어지는 경우가 많다. 본 논문에서는 수장고의 조명계획시에 검토해야 할 요소를 살펴보고, 조명의 정량적인 기준인 조도에 대해서 검토하였다. 자료의 보존을 고려한다면 조도가 낮을수록 바람직하나, 자료관리를 감안한다면, 현재의 권장조도기준이 상대적으로 낮음을 알 수 있었다. 따라서 수장공간의 조도기준을 200［㏓］로 상향조정하고, 여타의 부속공간은 국부조명에 의해 조절하는 것이 타당하다.

• 조명전기설비학회논문지
• /
• 제29권9호
• /
• pp.1-9
• /
• 2015

The aim of this study is to deduce color temperature and illuminance by conducting the preference & affective evaluation consequent on illuminance change of ambient light in case of the lighting method of ambient light mixed with task light in time of reading which is visual work action among the action in learning space. As a result of the prior survey on preferred lighting method in time of the act of reading targeting 20 experts before doing evaluation, the method of lighting mixed with ambient light and task light was found to be the highest. Such a result is analyzed to be attributable to the fact that the less the difference in illuminance of nearby space and work surface because of the mixed method of lighting, the less the glare, which makes a reader feels easy and concentrate on reading. On the basis of descriptive statistics of evaluation results and impact analysis by category, this study recommends the application of combinations of ambient light illuminance ranging from 40lx to 100lx with color temperature of 5500~6000K in case of the method of lighting mixed with general light and task light.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 춘계 학술논문 발표대회 2부
• /
• pp.99-104
• /
• 2011

Daylighting system is an alternative to the energy crisis and environment change. And it is possible improvement system of Architectural Space Environment. Accordingly, it is very useful system. Because Daylight Duct System of Daylighting System gives high performance for its price, distribution rate is very high. But Daylighting Duct System is hard to accurate control. Accordingly, it is difficult to maintain continuously Daylight Environment in Interior Spaces. Lighting Diffusion System has been developed that it is Applying the principle of Reflector and prism diffuser for maximize the efficiency of lighting of Daylight Duct Systems through this study. And then compare lighting performance of Existing System and new Lighting Diffusion System through producing a mock-up. Thus, this study was carried out for the purpose of verification for excellence. It is that installed Each Daylighting Duct System for performance evaluation in a laboratory of width 4m, length 10m, height 2.5m. And illuminance was measured at noon on winter solstice(December 22) under clean sky. The actual measurement result was in the following. Newly developed lighting Diffusion system was measured maximum illuminance 399, minimum illuminance 221, average illuminance 141. Synthetically, daylight factor, uniformity factor and illuminance distribution were improved more than existing system. As a result, it was confirmed that was improved lighting Environment in Interior Spaces.

• KIEAE Journal
• /
• 제8권1호
• /
• pp.53-60
• /
• 2008

The daylighting affects on the human biological cycles and physiological alterations. Daylighting is also an important element in visual comfort and it sometimes influences the quality of vision. Therefore the absence of natural light during the day brings contradictory result. To solve the problems of natural light lack and provide sufficient daylight in interior spaces, it might be necessary to apply some daylighting systems. One of these systems, light pipe system, which is simple, cheep and easily constructed, is very useful to apply for small buildings. The light pipe is simple means of directing daylighting (diffuse and direct lighting)into interior space. In order to application of light pipe system in Korea, it is necessary to optical data of light pipe system. This study aims to evaluate preliminary experiment of the daylighting environment of light pipe system. Light pipe system, that aspect ratio is 1:2(diameter and length), was installed in a windowless mock-up with $27m^2$. The mock-up model was constructed as a prototype of Korean office surface. Illuminance was measured with a Topcon IM-5 Luxmeter to evaluate the distribution of the illuminance on a floor. The indoor and outdoor illuminance and the internal/external illuminance ratio are compared to discuss with in the graphs. Luminance was measured with Radiant imaging Promertric 1400 that is digital photometer to evaluate the distribution of luminance on interior surface. The contrast of luminance is discussed with table and graphs.

• 설비공학논문집
• /
• 제22권8호
• /
• pp.553-561
• /
• 2010

This study examines the influence of light variation on visual responses in a small office space where a daylight dimming control system is applied. Field measurements and survey were performed in a full-scale mocked-up small office space under clear sky day conditions. Maximum fluctuation range for desktop was 133.5 lx and it just happened once for entire monitoring period. For the majority of time, the fluctuation range did not exceed 50 lx, which did not cause visual discomfort to subjects. The daylight dimming control system successfully kept required illuminance levels for an office environment when desktop illuminance by daylight ranged up to 300 lx. The most serious contributor to the sensation of glare was direct daylight through window. The dimming of electric light was not a significant contributor to visual discomfort for the subjects under clear sky day conditions. Visual comfort was significantly influenced by the sensation of glare, feeling for visual stimulation and distraction, and required illuminance level.

• 한국태양에너지학회 논문집
• /
• 제23권3호
• /
• pp.73-80
• /
• 2003

The purpose of this study was to analyze daylighting performance in a semi-infinite size office space for lighting energy conservation. DOE2.1E was used for simulations for the model space of $12\times12\times2.6m$. Nomographs were developed which could simulate work plane illuminance, glare index, energy consumption rate and energy reduction rate for daylighting design. Major results of simulations are as follows ; 1) When blinds facing south were installed, 43% of workplane illuminance diminished, but the flare index didn't exceed the recommended max-glare value. 2) In a semi-infinite office space facing south. energy consumption rate in the case space of 500 lux workplane illuminance is larger then case space of 300 lux workplane illuminance. Therefore, energy reduction rate is increased when the semi-infinite office faces south and naintains 300 lux workplane illuminance level.

• Industrial Engineering and Management Systems
• /
• 제9권2호
• /
• pp.157-164
• /
• 2010

The objective of this study is to determine the dominance effects of environmental factors such as Illuminance, humidity and Wet Bulb Globe Temperature (WBGT) on the operators' productivity at Malaysian electronic industry. A case study was carried out at an electronic components assembly factory. The environmental factors examined were the Illuminance (lux), humidity and WBGT of the surrounding workstation area. Two sets of representative data including the illuminance, humidity and WBGT level and production rate were collected during the study. The production rate data were collected through observations and survey questionnaires while the illuminance level was measured using photometer model RS 180-7133, the humidity and WBGT level were measured by using Quest Temp apparatus and humidity. Taguchi Method was utilized to find the sequence of dominant factors that contributed to the productivity of operator at that specified production workstation. The study reveals that the dominant factor contributed to the productivity was WBGT, followed by illuminance and humidity.

• 조명전기설비학회논문지
• /
• 제28권5호
• /
• pp.1-14
• /
• 2014

This study has found out appropriate scopes of correlated color temperature and illuminance value with regard to general diffused lighting and work in the kitchen. It also has presented appropriate photometric quantity control speed for behavioral change with the following results. 1)For general diffused lighting, the appropriate photometric quantity has turned out to be 4,000 to 4,500K in color temperature and illuminance value of 300 to 400lx. And 300lx at 4,500K has proven to be the most comfortable, behavior-appropriate, and preferred pair. 2)As far as appropriate photometric quantity for work is concerned, color temperature of 4,000 to 5,000K and illuminance value of 600 to 800lx are appropriate, while 700lx at 4,500 to 5,000K are the most comfortable, behavior-appropriate, and preferred set. 3)As for appropriate photometric quantity control speed in behavioral change, 3 to 5 seconds has proven the most comfortable, appropriate, and preferred for behavioral change from entry to general areas and 1 to 3 seconds for change from general to work.

• 조명전기설비학회논문지
• /
• 제23권6호
• /
• pp.14-23
• /
• 2009

학교 조명실태를 조사하고 교실 1실에 설치된 조명기구의 수량별로 분류하고, 분류된 형태별로 조도를 측정하여 조도실태를 분석하였다. 책상면 조도는 학교시설기준을 만족하나 칠판용 국부조명을 설치하지 않은 경우 칠판조도가 학교시설기준에 미치지 못하였다. 교실 마감재 반사율 측정과 램프교체 및 램프청소 실험 등, 실제로 측정한 자료를 기초로 하여 시뮬레이션한 결과 현실적으로 전반조명 9등과 칠판용 국부조명이 필요하였으며, 유지관리를 고려한 설계가 요구됨을 알 수 있었다.