• Journal of Environmental Health Sciences
• /
• v.39 no.1
• /
• pp.56-70
• /
• 2013

Objectives: This paper aims to investigate the seasonal deposition characteristics of water-soluble ion species by comparing the deposition amount of two samples taken according to different sampling methods of deposition for ambient aerosol such as gases and particulate matters. Methods: Deposition samples were collected using two deposition gauges in the downtown area of Iksan City over approximately two weeks of each season in 2004. The type of deposition gauges consisted of two different sampling methods known as dry gauge and a wet gauge. The dry gauge was empty and used a dry PE bottle with an inlet diameter of 9.6 cm. Before the beginning of each deposition sampling, a volume of 30-50 ml distilled ionized water was added to the wet gauge to wet the bottom during the sampling period. Deposition samples were measured twice per day and analyzed for inorganic water-soluble ion species using ion chromatography. Results: The daily deposition amounts of all measured ions in the dry gauge and the wet gauge showed a significant increase when precipitation occurred, having no difference of deposition amount between in the wet gauge and in the dry gauge. By excluding two samples from rainy days during the sampling period, the mean daily deposition of all ions in dry gauge and wet gauge were $6.58mg/m^2/day$ and $18.16mg/m^2/day$, respectively. The mean deposition amounts of each ion species were higher in the wet gauge than in the dry gauge because of the surface difference of the sampling gauge, especially for $NH_4{^+}$ and ${SO_4}^{2-}$. The mean deposition amounts of $NH_4{^+}$ and ${SO_4}^{2-}$ in the wet gauge were found to be about 15.4 times and 5.2 times higher than that in dry gauge, with a pronounced difference between spring and summer, while the remaining ion species were 1.1-2.0 times higher in the wet gauge than in the dry gauge. Dominant species in the dry gauge were $Ca^{2+}$ and $NO_3{^-}$, accounting for 36.4% and 18.1% of the total ion deposition, whereas those in the wet gauge were $NH_4{^+}$ and ${SO_4}^{2-}$, accounting for 32.5% and 25.0% of the total ion deposition, respectively. Conclusion: The seasonal differences in deposition amounts of water-soluble ion species in ambient aerosol depending on the two types of different sampling methods were identified. This suggests that the removal of ambient aerosol is strongly influenced by the weather conditions of each season as well as the condition of earth's surface, such as dry ground and water.

• Korean Journal of Breeding Science
• /
• v.40 no.3
• /
• pp.295-298
• /
• 2008

"Dongjin2" is a new japonica rice cultivar developed from the cross between Milyang165 with short culm and lodging resistance and $F_1$ plant of Iksan438, HR14018-B-1-1 and Iksan435 with high palatability at Honam Agricultural Research Institute (HARI), NICS, RDA in 2005. This cultivar has short grain shape and about 143 days growth duration from direct seeding to harvesting under Korean climate condition. The milled kernels of "Dongjin2" is translucent with non-glutinous endosperm. It has about 19.3% of amylose content and better palatability of cooked rice compared with "Nampyeongbyeo". This cultivar shows high resistance reaction to the bacterial blight pathogene race from $K_1$ to $K_3$, blast and stripe virus but susceptible to insect pests. "Dongjin2" yields about 5.71 and 5.74 MT/ha under the wet direct seeding and the transplanting at standard fertilizer level. "Dongjin2" would be adaptable for the southern plain area of Korea.

• Korean Journal of Breeding Science
• /
• v.40 no.3
• /
• pp.314-317
• /
• 2008

"Dami" is a new japonica rice variety developed and registered by the rice breeding team of Honam Agricultural Research Institute, NICS, RDA in 2006. This variety was derived from a cross between Iksan438 with lodging tolerance and high yield potential, and Iksan426 This variety has about 122 days of growth duration from transplanting to harvesting in Honam and Youngnam plain of Korea. It is about 83 cm in culm length and tolerance to lodging. In reaction to biotic stresses, it shows moderately resistance to blast, and resistance to bacterial blight pathogen races from $K_1$ to $K_3$, but susceptible to other major diseases and insect pests. The milled rice of "Dami" has high Quality, midium short grain. The milled rice yield of this variety is about 5.92 MT/ha in local adaptability test for three years. "Dami" would be adaptable to Middle plain, Honam plain and Youngnam plain area of Korea.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.32 no.1
• /
• pp.33-46
• /
• 2004

This study is aimed to redesign established parks and to propose a series of devices protecting them from vandalism. To solve the problems, we ascertained the damaged areas of the park greens. The trace analysis was performed to grasp the transverse inside the parks of Jeonju and Iksan in Collabuldo. Then, we presented the basic plan for minimizing park damage and for remodeling the system of movement. The results of the study are summarized as follows: it is identified that the transverse phenomenon is considerably wide-spread in majority of parks, and has no relationship to the park area or the green area. It is considered that the $\ulcorner$Condition rating class$\lrcorner$ of grass damage, which is grade 6, is extraordinarily high and the damage is accumulated considerably. Also, the damage part of other grade is discovered equally, and when unattended, the acceleration of damage is positive. A damage width a 0.5∼1.5m makes up the greater part of 79.6%. It also constitutes most of a rectilinear form. The difference in the height between the original point and destination point is below 0.7m, which is above 70%. It is identified that the interrelationship between the damage continuation length and plan distance is relatively high by the simple regression: analysis and by Pearson' correlation analysis. In spite of the normal damage continuation length is 20m, the frequency degree is downward with extreme point at 10m. Accordingly, it is assumed that park users have physical and psychological pressure when they cross the lawn field. Damage types are classified as the Simple cut cross type, the Behavioral facilitates type, Access advantage type and the Strolling type through type classification. It is considered that this classification is effective when identifying short pass type on lawn field according to the damage length and intensity.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.13 no.3
• /
• pp.237-244
• /
• 2001

The watershed information of the Mankyung River and Dongjin River is obtained and analysed using the GIS tool. The informations i.e., digital map, land use, point sources, weather station, water quality measurement station, and pollutants load unit are managed by DB system. The slope, rainfall, and generated pollutants loads of COD, TN and TP which are the input data of the rainfall-runoff-pollutants load model are estimated. From the analysis of the collected and generated data, the almost watershed area is composed of agricultural lands except the upstream regions. The population and industrial area are densely located in Cheonju City and Iksan City, whereas the farming areas are widely distributed.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.33 no.6 s.113
• /
• pp.51-77
• /
• 2006

Pond management is a critical part of overall golf course management, both during growth and maintenance modes of turf care. This study investigated 48 ponds in nine 18- or 27-hole golf courses to analyze the environmental characteristics of ponds. The research process had three phases: (1) inventory and analysis of grading plans and drainage plans, (2) field verification and interviews with greenskeepers, and (3) analyses of water quality and statistics. All data were collected from May to August in 2004. The results of this study can be summarized as follows: 1. It is desirable to site a golf course in a small watershed with high watershed eccentricity to control storm water runoff efficiently and to minimize soil erosion during construction. 2. The siting and size of a pond should be determined through a land-use analysis of the watershed for the purpose of ecological management. The bigger the forest-to-golf course ratio, the better the water quality will be. 3. The size and capacity of each individual ponds varied and there were many somewhat longish rather than round ponds. 4. There were many differences among golf courses in naturalness of the ponds, and the correlation between naturalness and area of aquatic plants was very high. 5. Analyses of pond water quality indicated that the degrees of Dissolved Oxygen, Chemical Oxygen Demanded and Suspended Solids were relatively low values but Total Phosphorus and Total Nitrogen were too high. Therefore a systematic approach is needed to solve e problem. Pesticide residues were not detected in all ponds. 6. Water depth and area of hydrophyte should be considered when designing an ecological pond. 7. All ponds used storm water as a main source of water supply and added underground water. Aquatic plants and physical methods such as water aeration and spray fountains were the main choices for maintaining a healthy aquatic environment.

• Tribology and Lubricants
• /
• v.30 no.2
• /
• pp.124-129
• /
• 2014

The piping system accounts for a large portion of the machinery structure of a plant, and is considered as a very important mechanical structure for plant safety. Accordingly, it is used in most energy plants in the nuclear, gas, and heavy chemical industries. In particular, the piping system for a nuclear plant is generally complicated and uses the reactor and its cooling system. The piping equipment is exposed to diverse loads such as weight, temperature, pressure, and seismic load from pipes and fluids, and is used to transfer steam, oil, and gas. In ultrasound infrared thermography, which is an active thermography technology, a 15-100 kHz ultrasound wave is applied to the subject, and the resulting heat from the defective parts is measured using a thermography camera. Because this technique can inspect a large area simultaneously and detect defects such as cracks and delamination in real time, it is used to detect defects in the new and renewable energy, car, and aerospace industries, and recently, in piping defect detection. In this study, ultrasound infrared thermography is used to detect information for the diagnosis of nuclear equipment and structures. Test specimens are prepared with piping materials for nuclear plants, and the optimally designed ultrasound horn and ultrasound vibration system is used to determine damages on nuclear plant piping and detect defects. Additionally, the detected images are used to improve the reliability of the surface and internal defect detection for nuclear piping materials, and their field applicability and reliability is verified.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.38 no.6
• /
• pp.57-69
• /
• 2001

Expert system is one of AI area. It simulates the human's way of thinking to give solutions of problem in many applications. Most expert system consists of many components such as inference engine, knowledge base, and so on. Especially the performance of expert system depend on the control of efficiency of inference engine. Inference engine has to get features; first, if possible to minimize restrictions when it constructed the knowledge base. second, it has to serve various kinds of inferencing methods. In this paper we propose knowledge scheme for representing domain knowledge in ease, knowledge implementation technique for inferencing, and integrated knowledge-base engine with blackboard and inference engine. And we describe a expert system prototype that implemented in this paper using proposed methods, it perform diagnose about heavy industrial device. The fault diagnosis system prototype has been studied in this paper will be practical foundation in the research area of knowledge based system.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.32 no.3
• /
• pp.193-202
• /
• 2012

'Joseong', a winter forage triticale cultivar (X Triticosecale Wittmack), was developed by the breeding team at the Department of Rice and Winter Cereal Crop, NICS, RDA in 2010. The cultivar 'Joseong' was selected from the cross FAHAD_5/RHINO1R.1D 5+10 5D'5B'//FAHAD_5 by CIMMYT (Mexico) in 1992. Subsequent generations were handled in pedigree selection program at Mexico from 1993 to 1998, and a line 'CTSS92Y-A-4Y-0M-5Y-0B' was selected for earliness and good agronomic characteristics. After preliminary and advance yield test in Korea for 2 years, the line designated as a line name of 'Iksan26'. The 'Iksan26' was subsequently evaluated for earliness and forage yield in 7 different locations such as Jeju, Iksan, Cheongwon, Yesan, Naju, Daegu, and Jinju from 2008 to 2010 and finally named as 'Joseong'. The cultivar 'Joseong' has characteristics of dark green leaf, yellow culm and spike, and large grain of yellowish brown color. The heading date of cultivar 'Joseong' was April 24, which was 5 days earlier than that of check cultivar 'Shinyoung'. It showed better tolerance or resistance to lodging, wet injury, powdery mildew, and leaf rust than those of the check cultivar 'Shinyoung'. The average forage dry matter yield of cultivar 'Joseong' at milk-ripe stage was 14.5 MT $ha^{-1}$, which was lower than 16.5 MT $ha^{-1}$ of the check cultivar 'Shinyoung'. The silage quality of 'Joseong' (5.3%) was lower to the check cultivar 'Shinyoung' (6.0%) in crude protein content, while was 2.1% superior to the check cultivar 'Shinyoung' (61.9%) in TDN (total digestible nutrients). It showed 5.1 MT $ha^{-1}$ of grain yield, which was 40% higher than that of the check cultivar 'Shinyoung' (3.65 MT $ha^{-1}$). This cultivar is recommended for fall sowing crop in the area where daily minimum mean temperatures are averaged higher than $-10^{\circ}C$ in January, and as a winter crop using whole crop forage before planting rice in around Korea.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.38 no.1
• /
• pp.23-29
• /
• 2018

'Dakyeong' (Avena sativa L.), a winter oats for forage use, was developed by the breeding team at National Institute of Crop Science, RDA in 2016. It was derived from a cross between 'CI7505'(IT133304) and 'Swan'(IT197920). Subsequent generations followed by the cross were handled in bulk and pedigree selection programs at Iksan and Jeonju, respectively. After preliminary and advanced yield test for 2 years, 'SO2004009-B-B-10-8-3-9', designated as a line name of 'Gwiri91', were subsequently evaluated for earliness and forage yield during 3 years in four parts such as Jeju (upland), Yesan (upland), Iksan (upland), and Jeonju (paddy), from 2014 to 2016, and finally named as 'Dakyeong'. Cultivar 'Dakyong' has leaves of dark green color, thick diameter culm and long grain of brown color. Over 3 years, the heading date of 'Dakyeong' was about 5 days earlier than that of check cultivar 'Samhan' (April 30 and May 5, respectively), and their average forage dry matter yield harvested at milk-ripe stage was higher 12% ($15.7tone\;ha^{-1}$) than $14.0tone\;ha^{-1}$ of check cultivar. Cultivar 'Dakyeong' was lower than the check cultivar 'Samhan' in terms of the protein content (6.1% and 7.0%, respectively) and total digestible nutrients (62.1%, and 62.5%, respectively), while the TDN yield was more than the check ($7.79tone\;ha^{-1}$ and $7.64tone\;ha^{-1}$, respectively). Fall sowing cropping of 'Dakyeong' is recommended only in areas where average daily minimum mean temperatures in January are higher than $-6^{\circ}C$, and it should not be cultivated in mountain areas, where frost damage is likely to occur.