• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.577-582
• /
• 2001

Identification of damage of structures has recently received considerable attention in the light of maintenance and safety assessment under service loads. In buildings, the current techniques of safety assessment largely depend on partial experiments such as visual inspection, destructive and nondestructive tests which lead to overconsumption of time and cost as well as higher labor intensity. Therefore, a new trial for safety assessment is urgently needed today. In this respect, the vibration characteristics of buildings have been applied steadily to obtain a damage index of the whole building, but it cannot be established as a practical method until now. This study is aimed at investigating the application of damage identification methods using vibration characteristics of building. Numerical tests are performed on a apartment building. From the test results, it is observed that severity and location of damage can be estimated with a relatively small error by using natural frequency and mode shape data.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 전력전자학술대회 논문집
• /
• pp.200-204
• /
• 2002

When the vector control, which does not need a speed? signal from a mechanical speed sensor, it is possible to reduce the cost of the control equipment and to improve the control performance in many industrial application. This paper describes a rotor speed identification method of induction motor based on the theory of flux model reference adaptive system. The estimator execute the rotor speed identification so that the vector control of the induction motor may be achieved. The improved auxiliary variable of the two model are introduced to perform accurate rotor speed estimation. Simulation result show the validity of the proposed control method.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2005년도 총회 및 춘계학술발표회
• /
• pp.316-319
• /
• 2005

Contaminated area should be identified for designing polluted groundwater cleanup plan. A methodology was suggested to identify a contaminant plume distribution geostatistically. James & Gorelick (1994) suggested a methodology to evaluate data worth as expected reducing remediation cost. In this study, their methodology was modified to evaluate data worth as expected reducing uncertainty of the contaminant plume distribution. In suggested methodology, the source identification model by Mahar & Datta (2001) using a forward solute transport model is integrated. Suggested methodology was assessed by two simple example problems and its result represented reducing uncertainties of contaminant plume distribution successfully.

• Journal of the Optical Society of Korea
• /
• 제12권2호
• /
• pp.69-78
• /
• 2008

EPONs are a low cost, high speed solution to the bottleneck problem of broadband access networks. To support point-to-point and shared LAN emulation, EPONs use the multi-point control protocol (MPCP), which uses logical link identification (LLID) forframe tagging and filtering between the OLT and ONUs. In this paper, ONU-based multicast or multiple shared LAN emulation for IPTV services is proposed using logical group identification (LGID). Using ONUbased VLAN services, EPONs can support separate and secure connections between providers and subscribers in a simple manner. Also, differentiated IPTV channel packages can be delivered through EPONs by implementing ONU-based VLAN and IGMP snooping mechanisms.

• 제어로봇시스템학회논문지
• /
• 제14권3호
• /
• pp.295-300
• /
• 2008

In this paper, a new looper controller is proposed to minimize the tension variation of a strip in the hot strip finishing mill. The proposed control technology is based on a receding horizon control (RHC) to satisfy the constraints on the control input/state variables. The finite terminal weighting matrix is used instead of the terminal equality constraint. The closed loop stability of the RHC for the looper system is analyzed to guarantee the monotonicity of the optimal cost. Furthermore, the RHC is combined with a 4SID(Subspace-based State Space System Identification) model identifier to improve the robustness for the parameter variation and the disturbance of an actuator. As a result, it is shown through a computer simulation that the proposed control scheme satisfies the given constraints on the control inputs and states: roll speed, looper current, unit tension, and looper angle. The control scheme also diminishes the tension variation for the parameter variation and the disturbance as well.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2018년도 추계학술대회
• /
• pp.127-129
• /
• 2018

레이다비콘(Racon)은 선박이 운항하면서 해상에 짙은 안개가 끼거나, 야간 등 시계가 불량할 때 위험한 암초 등 항행 장해물을 회피하거나, 지정된 항로를 레이다 화면에 표시하여 항해자가 안전하게 운항할 수 있도록 도와주는 항행장비이다. 기존 레이다비콘에 AIS(Automatic Identification System)기능을 부가한 차세대 레이콘을 e-Racon (Enhanced Radar Beacon) 개발을 연구하면서 기존의 안테나를 IALA Rec. R-101 이 규정하는 안테나 요구사항에 적합한 e-Racon 안테나로 기능을 개선하는 연구를 하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.991-993
• /
• 2000

The paper presents the software control of a brush-less do motor with parameter identification. Not only speed and current controls but also a real-time identification of the motor parameters can be implemented by software using the digital signal processor TMS320F240. The DSP Controller TMS320F240 from Texas Instruments is suitable for a wide range of motor drives TMS320F240 provides a single chip solution by integrating on-chip not only a high computational power but also all the peripherals necessary for electric motor control. This new family of DSPs enables single chip, cost effective, modular and increased performance solutions for BLDC drives. The present paper describes how a speed controlled brushless DC drive can be implemented using TMS320F240 and what kind of results can be achieved.

• 반도체디스플레이기술학회지
• /
• 제18권3호
• /
• pp.31-35
• /
• 2019

Human beings have been fascinated by the applicability of the medium of photography since the device was first introduced in the thirteenth century to acquire images by attempting primitive and rudimentary approaches. In the 21st century, it has been developed as a wide range of technology that enables not only the application of artistic expression as a method of replacing the human-hand-painted screen but also the planar recording form in the format of video or image. It is more effective to use the information extracted from the image data rather than to use a randomly given file name in order to provide a variety of services in the offline or online system. When extracting an identifier from a region of an image, high cost cannot be avoided. This paper discusses the image entropy-based approach and proposes a linear methodology to measure the image entropy in an effort to devise a solution to this method.

• 한국정보시스템학회지:정보시스템연구
• /
• 제15권4호
• /
• pp.225-245
• /
• 2006

RFID(Radio Frequency IDentification) systems is a wireless frequency recognition technology that can be used to recognize, trace and identify people, things and animals using RFID. Recently, RFID systems have emerged as new forms of interorganizational systems(IOS). Because of their capability for real-time identification and tacking over large distances, some believe that RFID systems will fundamentally change the my companies do business. The purpose of this study is empirically examined RFID systems adoption for u-business. To achieve this purposes, we were collected 72 questionnaires from Korean companies. In this study, RFID systems adoption was influenced by top management support, information systems maturity, competitive pressure, trust perceived advantage of u-business, compatibility of RFID tag. However, firm size, cost exercised power, did not affect significantly on RFID systems adoption. In the conclusion, study's limitations md implications treated.

• 디지털콘텐츠학회 논문지
• /
• 제6권4호
• /
• pp.229-234
• /
• 2005

기업들은 소프트웨어의 품질 개발 속도 및 개발비용 둥의 문제를 해결하기 위한 새로운 대안으로서 오픈소스 소프트웨어 개발 접근 방법의 적용을 시도하고 있다. 한판 그 동안 오픈소스 소프트웨어에 대한 다양한 분석들이 이루어졌지만 실제 산업에서 소프트웨어 개발에 오픈소스를 활용하기 위한 구체적인 절차나 방법에 대한 적절한 연구의 결과가 없다. 본 연구에서는 기업이나 기관 개인이 오픈소스의 일부 또는 전체를 활용하여 소프트웨어를 개발하고자 할 패, 적절한 오픈소스를 식별 평가, 선정하여 변경, 적용하거나 제품화하기 위한 절차 모델을 제시하고자 한다.