• 한국전기전자재료학회논문지
• /
• 제27권10호
• /
• pp.668-672
• /
• 2014

Carbon nanotubes(CNT) has chemical stability and great sensitivity characteristics. In particular, the gas sensor required characteristics such as rapid, selectivity and sensitivity sensor. Therefore, CNT are ideal materials to gas sensor. So, we fabricated the NOx gas sensors of MOS-FET type using the MWCNT (multi-walled carbon nanotube). The fabricated sensor was used to detect the NOx gas for the variation of $V_{gs}$(gate-source voltage) and electrode changed electrode spacing=30, 60, 90[${\mu}m$]. The gas sensor absorbed with the NOx gas molecules showed the decrease of resistance, and the sensitivity of sensor was increased by magnification of electrode spacing. Furthermore, when the voltage($V_{gs}$) was applied to the gas sensor, the decrease in resistance was increased. On the other hand, the sensor sensitivity for the injection of NOx gas was the highest value at the electrode spacing $90[{\mu}m]$. We also obtained the adsorption energy($U_a$) using the Arrhenius plots by the reduction of resistance due to the voltage variations. As a result, we obtained that the adsorption energy was increased with the increment of the applied voltages.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2012년도 제38회 춘계학술대회논문집
• /
• pp.356-363
• /
• 2012

This paper addresses an analytical study on the gas-solid two phase flows in a nozzle. The primary purpose is to get recognition into the gas-solid suspension flows and to investigate the particle motion and its influence on the gas flow field. The present study is the primal step to comprehend the gas-solid suspension flow in the convergent-divergent nozzle. This paper try to made a development of an analytical model to study the back pressure ratio, particles loading and the particle diameter effect on gas-solid suspension flow. Mathematical model of gas-solid two phase flow was developed based on the single phase flow models to solve the quasi-one-dimensional mass, momentum equations to calculate the steady pressure field. The influence of particles loading and particle diameter is analyzed. The results obtained show that the suspension flow of smaller diameter particles has almost same trend as that of single phase flow using ideal gas as working fluid. And the presence of particles will weaken the strength of the shock wave; the bigger particle will have larger slip velocity with gas flow. The thrust coefficient is found to be higher for larger particles/gas loading or back pressure ratio, but it also depends on the ambient pressure.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.519-524
• /
• 2003

In this paper we discuss the dynamic characteristics of the in-arm type hydropneumatic suspension unit(ISU). For this, two accurate models are introduced. The first one is the Benedict-Webb-Rubin equation which is adopted for the spring behavior of a real gas. This equation is applicable for the high pressure of the nitrogen gas which acts as a spring in ISU system. The second one describes the behavior of a damper, which is divided into four parts - jounce-loading, jounce-unloading, rebound-loading and rebound-unloading. This approach gives a good approximation of the real damper system. For the comparison purpose, the numerical results of the dynamic behavior of ISU system using a real gas and an ideal gas are given in the paper.

• 대한기계학회논문집B
• /
• 제27권9호
• /
• pp.1238-1247
• /
• 2003

Simplified thermodynamic analysis of high pressure 4-stage reciprocating compressors with 4 inter-coolers has been investigated to predict a behavior of a compressor system for NGV(natural gas vehicles). A computer program has been developed to predict and estimate the performance of high pressure 4-stage reciprocating compressor system. Thermodynamic properties of compressed natural gas(CNG) were calculated by ideal gas theory and compression cycle was assumed as reversible adiabatic compression and expansion processes, and isobaric intake and discharge processes. Comparison between results predicted by calculation model and measured by experimental tests is presented.

• 한국안전학회지
• /
• 제13권2호
• /
• pp.104-108
• /
• 1998

In order to evaluate the performances of safety valves for low pressure, the popping pressure and flow rate of the natural gas have been investigated. The measured results of the popping pressure show that there is a big scattering depending on the manufacture year of a safety valve. And sample A showed the ideal popping pressure mode compared to other B and C samples. The popping flow rate of the safety valve is proportional to the seat size as the inlet pressure increases. These results may be used as a guideline for a design and diagnosis of the safety valve.

• Korean Membrane Journal
• /
• 제3권1호
• /
• pp.51-58
• /
• 2001

The surface of Poly(ether imide) (PEI) membranes has been sulfonated using CIS03H. The resulting membranes were characterized through the analysis of ESCA and contact angle measurements The sulfonated PEI membranes were exposed to gases of $O_2$, $N_2$, and $CO_2$ to measure the permeation rates and ideal separation factors. In addition, the diffusivities and solubilities of individual gases were measured. The diffusivity effect is more dominant than the solubility one on gas transports.

• 한국가스학회지
• /
• 제8권4호
• /
• pp.62-69
• /
• 2004

정전기 방전으로 인한 재해방지, 생산효율의 향상, 정전기 방전에 민감한 전자소자의 보호를 위하여 각종 생산 공정에서는 정전기의 제전이 필요하다. 그래서 필름생산공장, 도장공장, 반도체 공장 등에서 이러한 정전기를 제거하기 위하여 제전기를 사용하고 있다. 본 연구에서는 전압인가식 제전기 bar의 길이, 동관의 길이 및 전극 간격을 변화시켜가면서 최적의 제전효율을 가지는 조건을 고찰하고, 이러한 조건에서 발생되는 방전에 의한 가연성 가스의 폭발 유무를 연구하였다. 그 결과 제전효율은 각각의 제전 bar에서 접지전극과 침상전극 사이의 간격이 8-11(mm)사이 일 때 최적의 제전효율을 나타내는 것을 알 수 있으며, 최적의 제전효율을 나타내는 bar에 대하여 가연성 가스의 폭발실험을 한 결과 폭발은 일어나지 않는 것을 알 수 있었다. 이상과 같이 본 연구를 통하여 나타난 결과를 이용하여 최적의 제전효율과 안전성을 가지는 방폭형 전압인가식 제전기 개발에 필요한 자료를 제시함으로써 산업현장에서 발생하는 가연성 가스에 의한 폭발사고를 미연에 방지할 수 있을 것으로 사료된다.

• 전기학회논문지
• /
• 제58권5호
• /
• pp.994-998
• /
• 2009

Existing cooling technologies no longer provide adequate heat dissipation due to excessive heat generation caused by the growing component density on electronic devices. An ionic gas pump can be used for the thermal management of micro-electronic devices, since the size of pump can be reduced to a micrometer scale. In addition, the gas pump allows for gas flow control and generation without moving parts. This ideal property of gas pump gives rise to a variety of applications. However, all these applications require maximizing the wind velocity of gas pump. In this study a barrier discharge type gas pump, with a needle-shaped corona electrode instead of a plate-shaped corona electrode, has been investigated by focusing on the corona electrode shape on the wind velocity and wind generation yield. As a result, the enhanced wind velocity and wind generation yield of 1.76 and 3.37 times were obtained with the needle-shaped corona electrode as compared with the plate-shaped corona electrode of the proposed barrier discharge type gas pump.

• 멤브레인
• /
• 제32권1호
• /
• pp.74-82
• /
• 2022

본 연구에서는 순수 PEBAX^® 분리막의 투과특성을 향상시키기 위해 개질된 fumed silica 나노입자를 혼합한 MMMs (mixed matrix membranes) 타입의 PEBAX®/fumed silica 하이브리드 분리막을 제조하고, 이산화탄소와 메탄의 투과 특성을 측정하였다. PEBAX^®-1657/TS-530 하이브리드 소재의 경우, FT-IR과 XRD 분석을 통해 PEBAX^® 고분자에 무기입자가 비교적 잘 분산되었음을 확인하였다. 기체투과특성 측정 결과 TS-530을 10 wt% 혼합한 분리막의 경우, 순수 PEBAX^® 분리막과 비교하여 투과도 계수는 약간 감소하나 이상분리인자는 약간 증가하였다. 이는 비투과성 silica 입자의 도입에 따라 기체 확산 경로가 줄어들고, 경로의 비틀림이 증가하기 때문으로 볼 수 있다. TS-530 함량이 증가함에 따라서는 투과도 계수와 이상분리인자 간에 전형적인 trade-off 경향을 보였다. 이는 TS-530 함량이 증가함에 따라 결정성이 감소하고, 고분자 사슬 간 충전 억제에 따라 자유부피가 증가하기 때문으로 볼 수 있다. 또한 무기입자 함량 증가에 나노간극의 형성 가능성이 높아지고, 이에 따라 기체 확산도가 커지기 때문으로 판단된다.

• 천문학회보
• /
• 제42권2호
• /
• pp.75.1-75.1
• /
• 2017

Ram pressure due to the intracluster medium (ICM) is known to play a crucial role in removing the cool gas content of a galaxy on a short timescale, potentially driving a star forming galaxy to evolve into a red passive population. Although many HI imaging studies find clear evidence of diffuse atomic gas stripping from cluster galaxies, it is still debatable whether the ram pressure can also strip dense molecular gas. NGC 4522, a Virgo spiral, undergoing strong ram pressure stripping, is one of the few cases where extraplanar CO emission together with stripped HI gas and $H{\alpha}$ knots has been identified, providing an ideal laboratory to study the molecular gas stripping event and the extraplanar star formation activity. The aim of this work is to investigate the origin of extraplanar molecular clouds near NGC 4522 (e.g. stripped or forming in situ), and to probe a relation between the molecular gas surface density and the star formation rate (i.e. the Kennicutt-Schmidt law) at sub-kpc scale, especially in the extraplanar space, using ALMA Cycle 3 CO data and $H{\alpha}$ data of NGC 4522. We present the results from our ALMA observations, and discuss possible scenarios for the origin of extraplanar molecular clouds and to characterize the star formation activity associated with stripped gas outside the galactic disk.