• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.30 no.4
• /
• pp.331-338
• /
• 2004

Stress transfer to the surrounding tissues is one of the factors involved in the design of dental implants. Unfortunately, insufficient data are available for stress transfer within the regenerated bone surrounding dental implants. The purpose of this study was to investigate the concentration of stresses within the regenerated bone surrounding the implant using three-dimensional finite element stress analysis method. Stress magnitude and contours within the regenerated bone were calculated. The $3.75{\times}10-mm$ implant (3i, USA) was used for this study and was assumed to be 100% osseointegrated, and was placed in mandibular bone and restored with a cast gold crown. Using ANSYS software revision 6.0, a program was written to generate a model simulating a cylindrical block section of the mandible 20 mm in height and 10 mm in diameter. The present study used a fine grid model incorporating elements between 165,148 and 253,604 and nodal points between 31,616 and 48,877. This study was simulated loads of 200N at the central fossa (A), at the outside point of the central fossa with resin filling into screw hole (B), and at the buccal cusp (C), in a vertical and $30^{\circ}$ lateral loading, respectively. The results were as follows; 1. In case the regenerated bone (bone quality type IV) was surrounded by bone quality type I and II, stresses were increased from loading point A to C in vertical loading. And stresses according to the depth of regenerated bone were distributed along the implant evenly in loading point A, concentrated on the top of the cylindrical collar loading point B and C in vertical loading. And, In case the regenerated bone (bone quality type IV) was surrounded by bone quality type III, stresses were increase from loading point A to C in vertical loading. And stresses according to the depth of regenerated bone were distributed along the implant evenly in loading point A, B and C in vertical loading. 2. In case the regenerated bone (bone quality type IV) was surrounded by bone quality type I and II, stresses were decreased from loading point A to C in lateral loading. Stresses according to the depth of regenerated bone were concentrated on the top of the cylindrical collar in loading point A and B, distributed along the implant evenly in loading point C in lateral loading. And, In case the regenerated bone (bone quality type IV) was surrounded by bone quality type III, stresses were decreased from loading point A to C in lateral loading. And stresses according to the depth of regenerated bone were distributed along the implant evenly in loading point A, B and C in lateral loading. In summary, these data indicate that both bone quality surrounding the regenerated bone adjacent to implant fixture and load direction applied on the prosthesis could influence concentration of stress within the regenerated bone surrounding the cylindrical type implant fixture.

• Journal of Gastric Cancer
• /
• v.9 no.4
• /
• pp.159-166
• /
• 2009

Purpose: We evaluated the efficacy and prognostic predictability of the $7^{th}$ UICC TNM classification compared to $6^{th}$ UICC TNM classification in patients with gastric cancer. Materials and Methods: Between June 1992 and December 2006, 1,633 patients with gastric cancer who had undergone gastric surgery and who had been analyzed by the $6^{th}$ UICC method were analyzed using the new $7^{th}$ UICC system. Results: Significant differences in 5-year survival rates were observed for $7^{th}$ UICC N0, N1, N2, N3a, and N3b compared to $6^{th}$ UICC. There were no significant differences in 5-year survival rates between T2 and T3. Distinct survival differences were present between stage III (IIIa, IIIb, and IIIc) and stage IV in $7^{th}$ UICC. Significant differences in 5-year survival rates were not expected for Ia versus Ib, Ib versus IIa, and IIb versus IIIa. The survival rates for the same stages were not homogeneously differentiated by $7^{th}$ UICC except for stage IV. Conclusion: The $7^{th}$ UICC classification system is not better able to predict patient survival compared to 6th UICC in patients with gastric cancer, but is better for accurate prognosis of patients with stage IV gastric cancer.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.44 no.3
• /
• pp.341-349
• /
• 2017

Blood decontamination is an important factor in success of the orthodontic bracket. The purpose of this study is to evaluate the shear bond strength affected by blood decontamination. The shear bond strength was measured on blood decontamination before and after primer photopolymerization. And the adhesive remnants type and surface patterns was evaluated under scanning electron microscopy. A total of 50 human premolars were prepared. Group I was attached using conventional resin-acid etching method as control group. Group II and III were blood contaminated before curing primer and groups IV and V were blood contaminated after curing primer. Group II and IV were treated only with cotton pellet and Groups III and V were treated with cotton pellet after water washing. The mean shear bond strengths were in the order of groups I, V, III, II, and IV. In scanning electron micrographs group III and V showed more uniform surface than group II and IV. The ARI was significantly different between the control group and the experimental groups (p <0.05).

• Journal of Korean Traditional Oncology
• /
• v.24 no.2
• /
• pp.13-21
• /
• 2019

Objective : The purpose of this study is to report and observe effects of Traditional Korean Medicine (TKM) on stage IV metastatic breast cancer patient. Method : A right breast cancer patient diagnosed with metastatic lesions on liver, lung, spleen, multiple bones and skin on right breast April 2013. The patient received Herceptin + Docetaxel + Zometa from May 2013 and started to receive TKM since July 2013 to decrease side effects of chemotherapy. From December 2013 to November 2014, she had received Herceptin 18 times more. The clinical outcomes were measured by computed tomography, laboratory findings including tumor markers (CEA, CA15-3), liver function test (AST, ALT), and numeric rating scales (NRS). Results : After 6 years of TKM treatment combined with standard chemotherapy, tumor size was partially decreased in lung, liver, right pleura and spleen. Levels of tumor markers also showed decrease. There were no severe adverse events induced by TKM based on National Cancer Institute Common Terminology Criteria for Adverse Event (NCI-CTCAE) version 4.0. Conclusion : This case suggests that TKM combined with standard chemotherapy could be a promising method for treating metastatic stage IV breast cancer.

• The Korean Journal of Pain
• /
• v.9 no.2
• /
• pp.354-362
• /
• 1996

Background: We started postoperative pain management service using an intravenous patient-controlled analgesia (IV-PCA, PCA), which is known as convenient and effective analgesic method. In this report, we describe the efficacy and safety of PCA and the experience of developing an acute pain service to treat postoperative pain using a PCA. Methods: Practices of an acute pain service were started at a ward for general surgery after preparation of the standardized protocols for PCA. In each patient, PCA was connected following administration of initial loading doses of analgesics at recovery room after operation. All patients were checked by acute pain service team once or twice daily. The scope of acute pain service was gradually spread to other departments such as orthopedic, thoracic, obstetric and gynecologic departments by requests of patients or surgeons. We managed 1,590 patients during first 22 months. among them, nine hundred seventy two cases were prospectively evaluated for their analgesis efficacy and side effects of PCA. Results: The number of patients was increased day by day. the most common type of operation was gastrectomy (21.6%). Commonly used analgesics were nalbuphine (59%) and morphine (37%). The mean duration of PCA attachment was 3.3 days. The degree of analgesia on operation day was good in 44.8% and tolerable in 52.6% of patients. Only 3.9% of patients complained severe pain during their postoperative periods. One elderly patient experienced respiratory depression (0.06%) owing to accidental misuse of PCA by his relatives. Overall patient's satisfaction was over 93%. Conclusion: According to our experiences, we conclude that PCA is an effective, relatively safe and highly satisfactory method for postoperative pain management. Because of these advantages of PCA, the creation of our acute pain service using a PCA was successful and expanded rapidly.

• Analytical Science and Technology
• /
• v.14 no.5
• /
• pp.410-415
• /
• 2001

An analytical method has been developed which determines lead in steel samples by inductively coupled plasma mass spectrometry (ICP-MS) with sample introduction by the hydride generation. The lead hydride is not stable and requires and oxidant for the oxidation into metastable Pb(IV) before reduction to $PbH_4$ with $NaBH_4$. A study was carried out to find and optimum lead hydride generation condition for a sample solution with more than $1000{\mu}g/mL$ Fe matrix. $K_2Cr_2O_7$ was found to work as an efficient oxidant when more than $10{\mu}g/mL$ Fe matrix was present. Lactic acid was used with the oxidant as a complexing agent of the metastable Pb(IV) to enhance sensitivity. Optimum concentrations of the sample acidity, oxidant and lactic acid were different depending on the matrix concentration. The isotope dilution method was employed for the quantitation of lead. The determined Pb concentrations of the NIST steel SRM 361 and 362 were in good agreement with the certified values within the uncertainty range.

• YAKHAK HOEJI
• /
• v.50 no.2
• /
• pp.136-143
• /
• 2006

Roots of Scutellaria baicalensis have been used for fever remedy; diuresis, antiphlogistic. For the investigation of the active component from aerial parts of Scutellaria baicalensis, MeOH extracts from aerial parts of Scutellaria baicalensis were suspended with $H_2O$, and partitioned by $CHCl_3$. In order to investigate the efficacy of antioxidative activity the activity guided fraction and isolation of physiologically active substance were peformed. Its $H_2O,\;30\%,\;60\%$ MeOH and MeOH fractions were examined on antioxidative activity using DPPH method and TBARS assay; It was revealed that $30\%\;and\;60\%$ MeOH fractions have significant anti-oxidative activity. its fractions testing type I allergy, compound 48/80 induced systemic anaphylaxis was applied. As a result, compared with reference (cromolygate), these fraction significantly inhibited systemic anaphylaxis by $71\%\;and\;57\%$, respectively. From $30\%,\;60\%$ MeOH fraction, five compounds were isolated and elucidated apigenin 6-C-${\alpha}$-L-arabinopyranosyl-8-C-${\beta}$-D-glucopyranoside (isoschaftside, I), scutellarein 7-O-${\beta}$-D-glucuronopyranoside (scutellarin, II), apigenin 7-O- ${\beta}$-D-glucuronopyranoside (III), isoscutellarein 8-O-${\beta}$-D-glucuronopyranoside (IV), kaempferol 3-O-${\beta}$-D-glucopyranoside (V) through their physicochemical data and spectroscopic methods. We measured radical scavenging activity with DPPH method and anti-lipid peroxidative efficacy on human LDL with TBARS assay. [$I] showed antioxidant activities in order. Type I allergy compound 48/80 induced systemic anaphylaxis was applied. $[V inhibited systemic anaphylaxis in order.

• 한국초전도학회:학술대회논문집
• /
• v.9
• /
• pp.280-290
• /
• 1999

The microstructures of a Tl$_{0.8}Pb_{0.2}Bi_{0.2}Sr_{1.6}Ca_2Cu_3O_{9+{\delta}}$/Ag tape (tape I ) with J$_c$ of 17,600 A/cm$^2$ at 77 K and 0 T and three Tl$_{0.8}Pb_{0.2}Bi_{0.2}Sr_{1.8}Ba_{0.2}Ca_{2.2}Cu_3O_{9+{\delta}}$/Ag tapes with J$_c$'s of 9,300 (tape II), 16,700 (tape III) and 25,200 A/cm$^2$ (tape IV)prepared using the powder-in-tube method and an in-situ reaction method, were investigated using scanning electron microscopy and high-resolution transmission electron microscopy, and compared each other. ln the tape preparation, an intermediate rolling process was incorporated during final heat-treatment for the last tape, but not for the rest of the tapes. The microstructural analysis revealed clear differences in grain-texturing, crystallographic defects and impurity phases, depending on the chemical composition of the tape. Tendency of directional grain-alignment increased in an order of tapes I, II III and IV. In tape IV, T1-1223 grains are textured, at least in local regions. In crystallographic defects, while stacking faults were prevalent in the former composition, dislocations and voids were frequently observed in the latter. Also impurity phases were appeared to be more abundant in the former than in the latter. The relationship between 1,and the microstructure in the tapes was attempted to explain in a term of grain-linking.

• Advances in pediatric surgery
• /
• v.13 no.1
• /
• pp.23-29
• /
• 2007

Tapering enteroplasty was first described by Thomas in 1969 as one method of intestinal anastomosis. The advantages of tapering enteroplasty in the intestinal atresia are: First, it makes end-to-end anastomosis possible between the atretic bowel ends with considerable differences in diameters. Second, it promotes the recover of the postoperative bowel function. Third, it prevents the possibility of the short bowel syndrome by eliminating the need of resecting the dilated bowel. A total of 22 patients with intestinal atresia who underwent tapering enteroplasty from January 1988 to December 2005 at our institute were reviewed. In 3 of 22 cases, tapering enteroplasty was the $2^{nd}$ operation after an initial end-to-oblique anastomosis. We reviewed the following items: age, sex, type and location of intestinal atresia, initial feeding and total enteral feeding start day, the length of hospital stay and complications. The average age of the patients was 7 days. Male to female ratio was 1 to 1.2 (10 cases: 12 cases). We performed the tapering enteroplasty on all types and locations of the intestinal atresia from the duodenum to the colon: type I (n=3), type II (n=4), type IIIA (n=7), type IIIB (n=5), type IIIB and IV (n=1), type IV (n=1) and type C (duodenum) and type IIIB and IV (jejunum). On the average, the oral feeds were started on the postoperative $8.8^{th}$ day, and full caloric intake via the enteric route was achieved on postoperative $13.3^{th}$ day. The average length of hospital stay was 19.6 days. There were 1 case (4.5 %) of anastomotic complication and 2 cases (9 %) of adhesive ileus among 22 patients. The tapering enteroplasty on all types of intestinal atresia is a usefull operative method when there are considerable diameter differences between the atretic bowel ends.

• Nuclear Engineering and Technology
• /
• v.48 no.4
• /
• pp.952-964
• /
• 2016

The prototype generation IV sodium-cooled fast reactor (PGSFR) has been developed by the Korea Atomic Energy Research Institute. This reactor uses sodium as a reactor coolant to transfer the core heat energy to the turbine. Sodium has chemical characteristics that allow it to violently react with materials such as a water or steam. When a sodium-water reaction (SWR) occurs due to leakage or breakage of steam generator tubes, high-pressure waves and corrosive reaction products are produced, which threaten the structural integrity of the components of the intermediate heat-transfer system (IHTS) and the safety of the primary heat-transfer system (PHTS). In the PGSFR, SWR events are included in the design-basis event. This event should be analyzed from the viewpoint of the integrities of the IHTS and fuel rods. To evaluate the integrity of the IHTS based on the consequences of the SWR, the behaviors of the generated high-pressure waves are analyzed at the major positions of a failed IHTS loop using a sodium-water advanced analysis method-II code. The integrity of the fuel rods must be consistently maintained below the safety acceptance criteria to avoid the consequences of the SWR. The integrity of the PHTS is evaluated using the multidimensional analysis of reactor safety-liquid metal reactor code to model the whole plant.