• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.03a
• /
• pp.48-54
• /
• 2004

The effects of injector spacing s and injector diameter d on mixing are numerically investigated in supersonic combustor with perpendicular injection behind a backward-facing step. Simulations are reported for airstream Mach number of 2.4. Parameters are changed on following 4 cases to investigate the effects of injector configuration on mixing efficiency $\eta_m$. In the case of varying d or s, dynamic pressure ratio $Rq(=(pu^2)_j/(pu^2)_a)$ is also varied to keep bulk equivalence ratio $\Phi({\oe})Rq.d^2/s)$ constant. (l) Injector spacing s is varied at constant $\Phi$=0.5, 1, 2 for injector diameter d=6mm. In the case of $\Phi$=1, $\eta_m$ has its maximum value at s=24mm. The reason is that increase of $\eta_m$. , by widening spacing at Rq=constant competes with decrease of $\eta_m$ by increasing Rq at s=constant. When spacing is narrow, the flow field of vicinity of injector becomes two-dimensional because adjacent jets interferes each other. By widening spacing, air is easily entrained by three-dimensional effect. This mechanism also appears in the case of $\Phi$=0.5, 2 for d=6mm, and $\eta_m$. reaches its maximum value at s=24mm for $\Phi$=0.5 and at s=42mm for $\Phi$=2. (2) In the case of injector diameter d varied at $\Phi$=1 for s=30mm, $\eta_m$. has its maximum value at d=3mm. The reason is that decrease of $\eta_m$ by increasing injector diameter competes with increase of $\eta_m$ by decreasing Rq at d=constant.(3) In the case of s varied at $\Phi$=0.5, 1,2 for d=3mm, the injector spacing at which mixing efficiency has its maximum value is s= 18mm for $\Phi$=0.5, s=24mm for $\Phi$=1, s=24mm for $\Phi$=2. Therefore it is found that d=3mm and s=24mm can be optimum configuration over a range of $\Phi$=0.5~2.(4) The effect of h on the optimum spacing is investigated. s is varied for d=6mm at step height h=4, 6, 8mm. The simulation results do not show significant change on the step height.

• Journal of Embryo Transfer
• /
• v.13 no.3
• /
• pp.235-243
• /
• 1998

In this study, we investigated the effects of three kinds of culture medium (Charles and Rosenkrans; CRlaa, Tyrode's; TALP, synthetic oviduct fluid: SOF), insulin transferrin + selenium complex (ITS), macromolecules(polyvinyl alcohol: PVA, fetalb-ovine serum: FBS) and NaCl on the development of early bovine embryos. In experiment 1, there were no differences in embryo development among three kinds of embryo culture medium (CR $l_{aa}$ , TALP, SOF). In experiment 2, BSA, FBS and PVA were added each in TALP as macromolecule sources. The developmental rates of embryos in BSA or FBS added TALP were significantly higher than in PVA added one (p〈0.01), but there was no difference between BSA and FBS added groups. In experiment 3, bovine embryos were cultured in TALP with the following supplements: BSA alone(1, 3 or 8 mg/ml, each) or BSA(1, 3 or 8 mg/ml, each)+ITS (10$\mu\textrm{g}$/m1 insulin, 5 $\mu\textrm{g}$/ml transferrin, 5 ng/ml selenium). In higher concentration of BSA and ITS supplemented groups, the developmental rates over compacted morula were higher than others, but there was a significant effect of ITS only in 1 mg/ml of BSA added group (p〈0.05). In experiment 4, the effect of reduced concentration of NaCl was evaluated. The developmental rate over compacted morula in the medium containing 90 mM of NaCl was higher than in 114 mM group (p〈0.05). In conclusion, BSA could be used as a macromolecule source in bovine embryo culture, and ITS, as a serum substitute, could be used for improving of embryonic development. Also, reduction of NaCl concentration from 114 mM to 90 mM may improve the development of bovine embryos.bryos.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.34 no.2
• /
• pp.144-158
• /
• 1998

In order to study basic information on the developed electro-magnetic compass, experiments were carried out on board M. S. KAYA at the pier of Dong Kuk Steel Mill in Pusan and the Korean southern sea using a three-axis magnetic sensor from Jan. 21, 1995 to Feb. 14, 1996. The obtained results were as follows : 1. The amount of old metal on the pier was about 27,290tons~57,440tons with an average of 40,560tons, the artificial local disturbance at the pier was min. 27.1$\mu$T, max. 66.5$\mu$T, ave. 433$\mu$T for the horizontal component and min. -27.0$\mu$T, max. 45.1$\mu$T, ave. 3.7$\mu$T for the vertical component. Its direction of horizontal component was 305$^{\circ}$ with the ship's head up bearing at 225$^{\circ}$. 2. The ship's magnetic distribution on the starboard side on berthing at the pier was 17.4$\mu$T for the horizontal component and -6.2$\mu$T for the vertical component. On the ship's port side, it was 19.8$\mu$T for the horizontal component and 4.1$\mu$T for the vertical component. On the ship's starboard side at sea, the ship's magnetic distribution was 19.2$\mu$T for the horizontal component and 3.2$\mu$T for the vertical component. On the ship's port side, the readings were 22.0$\mu$T for the horizontal component and -1.8$\mu$T for the vertical component. The directions of these readings were nearly starboard side. 3. On the pier, the secular change of the artificial local disturbance decreased 8.3$\mu$T from 61.0$\mu$T to 52.7$\mu$T for the horizontal component and decreased 7.1$\mu$T from 8.9$\mu$T M 1.8$\mu$T for the vertical component. On the starboard side from its berth, the ship, s magnetic distribution increased 2.6$\mu$T from 14.8$\mu$T to 17.4$\mu$T for the horizontal component and increased -0.1$\mu$T from -6.1$\mu$T to -6.2$\mu$T for the vertical component. On the ship's port side from its berth, it increased 7.1$\mu$T from 12.7$\mu$T to 19.8$\mu$T for the horizontal component and increased 10.2$\mu$T from -6.1$\mu$T to 4.1$\mu$T for the vertical component. 4. While at sea, on the ship's starboard side, the Secular change of the ship's magnetic distribution increased 3.9$\mu$T from 15.3$\mu$T to 19.2$\mu$T for the horizontal component and increased 2.0$\mu$T from -5.2$\mu$T to -3.2$\mu$T for the vertical component. On the port side, the changes increased 11.4$\mu$T from 10.6$\mu$T to 22.0$\mu$T for the horizontal component and increased 4.9$\mu$T from -6.7$\mu$T to -1.8$\mu$T for the vertical component. Upon berthing at the pier, the deviation of the secular change increased westerly 1 degree W~ 2.5$^{\circ}$ W from 3.5$^{\circ}$ W~ 5$^{\circ}$ W M 6W with the ship's head up bearing at 225$^{\circ}$. While at sea, these increased westerly 2$^{\circ}$ ~ 3$^{\circ}$ from the Northeast to the South and increased easterly 1$^{\circ}$ ~ 8$^{\circ}$ from the Southwest to the North. 5. While at port, within 1 mile between the ship and berth of the pier, as we approached the pier, the westerly deviation increased and when we departed the pier easterly deviation increased. When approaching the pier, the deviation was smaller than the deviation when the ship was departing from the pier. When approaching the bearing at 225$^{\circ}$ with the ship's head up bearing, the varies of deviation was smaller than the varies when the ship's head up bearing was departing from it.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.10
• /
• pp.933-940
• /
• 2013

In this study, we evaluated the heat release performance of two extruded-type and two swaged-type heat sinks used in an inverter for solar power generation. The number of fins and heat transfer areas of the two swaged-type heat sinks, namely S-62 and S-98, are 62 and 98 and $2.8m^2$ and $5.3m^2$, respectively. Those for the two extruded-type heat sinks, namely, E-38 and E-47, are 38 and 47 and $1.8m^2$ and $1.9m^2$, respectively. The heat release fractions of S-62 and S-98 were measured as 82.7 % and 86.3 %, respectively. Those of E-38 and E47 were measured to be 79.6 % and 81.6 %, respectively. In this experiment, despite the mass flow rates of air entering the heat sinks being almost the same, the heat release fractions increased with heat transfer area. Furthermore, despite S-62's heat transfer area being 47.4 % higher than that of E-47, its heat release fraction was higher by only 1.3 %. We believe that this indicates the better heat transfer property of the extruded-type heat sink. S-98's heat release is only 4.4 % higher than that of S-62, but its heat transfer area is 89.3 % higher; this suggests that its heat transfer area need to be optimized.

• The Korean Journal of Mycology
• /
• v.48 no.2
• /
• pp.169-173
• /
• 2020

We report on an unrecorded endophytic fungus, Grovesiella abieticola (Zeller & Goodd.) M. Morelet & Gremmen isolated from Abies koreana of Mt. Halla in Jeju. In this study, we used a culture method to determine its conidia and compared relative species using an internal transcribed spacer (ITS) 1, 2, and 5.8S ribosomal DNA sequence. Thus, we present the cultural characteristics and morphology of G. abieticola in this paper.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1981.05a
• /
• pp.38.1-38
• /
• 1981

Currently in the otologic field, there are various methods of special audiometric examinations, such as, tone decay, SISI, and impedance audiometry and only a few studies has been done in these fields sporadically in Korea. The purpose of this paper is to establish norms of various special audiometric tests, so we have performed the special audiometric tests on 100 male medical students in good physical condition and the follow results were obtained. 1. All cases showed over 90% of PB scores. The mean and its 2 S.D. were 98$\pm$4.9% in the right ear and 97$\pm$5.6% in the left ear. 2. The mean and its 2 S.D. of MCL(most comfortable level) were 45$\pm$15.4 dB in the right ear and 46$\pm$17.9 dB in the left ear, and its range was 12$\pm$12.2 dB in the right ear and 13$\pm$12.6 dB in the left ear. 3. The mean and its 2 S.D. of UCL (uncomfortable level) were 102$\pm$7.9 dB in the right ear and 102$\pm$7.9 dB in the left ear and about an half in cases showed over 106 dB of UCL. 4. In 95% of cases, SISIs(short increment sensitivity index) at 1, 000 Hz and 4000 Hz was below 45% in the right ear in both frequencies and below 55% and 75% in the left ear, respectively. 5. In 95% of cases, tone decays at 2, 000 Hz and 4, 000 Hz was below 10 dB in both ears. 6. The difference between SRT and PTA (speech reception threshold minus pure tone average) was 4$\pm$9.2 dB in the right ear and 4$\pm$10.0 dB in the left ear. 7. The dynamic range(uncomfortable level minus speech reception threshold) was 98$\pm$13.5 dB in the right ear and 99$\pm$13.5 dB in the left ear. We had trouble in estimating the dynamic range in about an half in cases, in which we couldn't estimate the UCL with our conventional audiometry. 8. The results of impedance audiometric tests were as follow: A. In the tympanogram, all cases were of A type with one exception of B type in the left ear. The mean and its 2 S.D. of its peak level were 22.8$\pm$32.94mm $H_2O$ in the right ear and 23.9$\pm$29. 81mm $H_2O$ in the left ear. B. The mean and its 2 S.D. of the compliance were 0.6$\pm$0.54cc in the right ear and 0.6$\pm$0.53cc in the left ear. C. The results of stapedial reflex: a. The mean and its 2 S.D. of the controlateral stapedial reflex at 500Hz, 1, 000Hz, 2, 000Hz, 4, 000Hz were 99$\pm$17.7 dB, 87$\pm$14.4 dB, 79$\pm$13.7 dB, 77$\pm$20.0 dB in the right ear and 99$\pm$15.9 dB, 88$\pm$13.9 dB, 79$\pm$13.7 dB, 77$\pm$21.3 dB in the left ear. Depending on the tested frequencies, the stapedial reflex wasn't generated in 6 cases in the right ear and 11 cases in the left ear. b. The mean and its 2 S.D. of the ipsilateral stapedial reflex at 1, 000Hz, and 2, 000Hz were 89$\pm$16.3 dB, 82$\pm$15.9 dB in the right ear and 89$\pm$18.0 dB, 83$\pm$18.9 dB in the left ear. Depending on the tested frequencies, the stapedial reflex wans't generated in 1 case in the right ear and 2 cases in the left ear. 9. Eustachian tube function using with impedance audiometry was malfunctioned in21 cases depending on the tested pressure and the range of peak level of tympanogram was 14$\pm$26.9mm $H_2O$(tested pressure:+250mm $H_2O$), 8$\pm$21.9mm $H_2O$ (tested pressure:-250mm $H_2O$) in the right ear and 11 cases depending on the tested pressure and the range of the peak level of tympanogram was 12$\pm$22.5mm $H_2O$ (tested pressure: +250 mm $H_2O$, 9$\pm$17.3mm $H_2O$(tested pressure: -250mm $H_2O$) in the left ear.

• Animal Systematics, Evolution and Diversity
• /
• v.35 no.4
• /
• pp.186-190
• /
• 2019

DNA barcoding of two marine tintinnids, Eutintinnus rectus and Schmidingerella arcuata, was performed using four samples collected from different sites in the north-eastern coast of South Korea. The loricae morphology was observed by light and scanning electron microscopy. Molecular data were analyzed using five nuclear ribosomal DNA markers(18S, ITS1, 5.8S, ITS2, and 28S genes) and one mitochondrial marker (CO1 gene). The intraspecific pairwise differences of E. rectus and S. arcuata in the CO1 gene were 0.0-0.2% and 0.0-0.6%, respectively, while there were no differences in the 18S rDNA sequences.

• Journal of Life Science
• /
• v.23 no.1
• /
• pp.95-101
• /
• 2013

In this study, plant samples of five species were collected from the Dokdo islands in South Korea. Plant samples such as Asparagus schoberioides, Corydalis platycarpa, Festuca rubra, Sedum oryzifolium, and Setaria viridis were collected from the Dongdo and Seodo. Endophytic fungal strains were isolated from the roots of five plants from the Dokdo islands. Thirty-three fungal strains were isolated from these native plants. All the endophytic fungi were analyzed by internal transcribed spacer (ITS) sequencing (ITS containing ITS1, 5.8s, and the ITS2 region). Waito-c rice seedlings were treated with fungal culture filtrates to test their plant growth-promoting activity. A bioassay of the D-So-1-1 fungal strain isolated from S. oryzifolium confirmed that it has the highest plant growth-promoting activity. All the endophytic fungi belong to four orders: Eurotiales (86%), Capnodiales (3%), Hypocreales (4%), and Incertae sedis (7%). The endophytic fungi were classified as Ascomycota, which contained Aspergillus (12%), Cladosporium (3%), Eurotium (3%), Fusarium (18%), Microsphaeropsis (6%), and Penicillium (58%) at the genus level.

• Journal of Photoscience
• /
• v.6 no.3
• /
• pp.135-139
• /
• 1999

The ratio of dissociation rate $textsc{k}$-acversus the radiative decay rate $textsc{k}$D of the 1O2(1Δg) dimol has been determined to be $1.5\times$109 by its relaxation dynamcis in combination with a two-step O2((1Δg) sensitizing tetratert-butylphthalocoyanine luminescence. Consequently, with a known $textsc{k}$D value of 1.2 $\times$103S-1 , 10$textsc{k}$-ac has been extracted to be 1.8 $\times$1012S-1 CDCl3.

• Culinary science and hospitality research
• /
• v.5 no.2
• /
• pp.93-112
• /
• 1999

The purpose of this study making clear the range of overlapping affairs since many parts of cooker's & dietitian duties are overlapped in the Law of Hygiene & its over-ranked laws. The fact that there're overlapped parts in the different qualifying system endowed by the government may lead too many troubles between cooker's & dietitian who have their own qualification, so it's important to grasp correctly job specifications of cooker's & dietitian and to make clear the sphere of business. This studies present following affairs as cooker's duties through analysis. 1. Participation in the overall Management & Policy department. 2. Making the Menu & Standard recipe. 3. Purchasing, Inspection, Market research on Food materials. 4. Sanitary management. 5. Facility manage & Safety Management. 6. Research & Development on cooking Know-How. 7, Teaching for the members of department. 8. Supervision & business appraisal of cooking members. 9. Sales management & Cost control. 10. Utensil management & its Maintenance.