• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.711-713
• /
• 2004

In the past time, the protection relay did only a protection function. Currently, its upgraded device i.e. IED(Intelligent Electric Device) has been designed to protect, control, and monitor the whole power system automatically. Also the device is desired to successfully measure important elements of the power system. This paper considers design method of a digital protection IED with a function of measuring various elements and a communication function. The protection IED is composed of the specific function modules that are signal process module, communication module, input/output module and main control module. A signal process module use a DSP processor for analysis of input signal. Main control module use a embedded processor, Xscale, that has an ARM Core. The communication protocol uses IEC61850 protocol that becomes standard in the future. The protection IED is able to process mass information with high-performance processor. As each function module is designed individually, the reliability of the device can be enhanced.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 추계학술대회논문집
• /
• pp.368-371
• /
• 2008

Cellulose based Electroactive Paper (EAPap) has been developed as a new smart material due to its advantages of piezoelectricity, large displacement, low power consumption, low cost and flexibility. EAPap can be used fur a surface acoustic wave (SAW) device using the piezoelectric property of EAPap, resulting in the cost effective and flexible SAW device. In this paper, inter digit transducer (IDT) structure using lift-off technique with a finger gap of $10{\mu}m$ was used for micro fabrication of the cellulose EAPap SAW devices. The performance of IDT patterned SAW device was characterized by a Network Analyzer. The feasibility of cellulose EAPap as a potential acoustic device was presented and explained.

• 전기학회논문지P
• /
• 제58권3호
• /
• pp.297-302
• /
• 2009

In this paper, we propose advanced screen detector as a tool for selecting the object for tracking and estimating its distance from a screen using fuzzy logic in vision based pointing device. Our system classifies the line component of the input image into horizontal and vertical lines and applies the fuzzy rule to obtain the best line pair which constitute peripheral framework of the screen. The proposed system improves the detection ratio for detecting the screen in relative to the detector used in the previous works for hand-held type vision based pointing device. Also it allows to detect the screen even though a small part of it may be hidden behind other object.

• 한국멀티미디어학회:학술대회논문집
• /
• 한국멀티미디어학회 2012년도 춘계학술발표대회논문집
• /
• pp.123-126
• /
• 2012

In general, there are 3 subjects of discussion in education field; namely past, present and future. Related with those facts, there is several information or knowledge that relatively hard to be presented in the real world. In this matter, digital content shows its contribution especially in the education field. Digital content can virtually represent the information or knowledge that seems to be difficult to be visualized in the real world before. In this project, researcher develops a mobile device's application that consist the skeleton's 3D virtual content. This application is expected to solve the above explained problem that usually appears during learning human skeleton in senior high-school's biology class. Besides, the application of digital content will make the learning process become easier because the student will have a visual learning tool. Last, the mobile device that is used in this prototype has offer an important beneficial namely mobility beneficial, so that the user can access the content anytime and anywhere.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1407-1410
• /
• 2007

This work reports on three primary color fluorescent white organic light emitting diode (WOLED) with simple device structure where only a part of the hole transporting layer was doped with dye. The maximum luminance of the device reaches $35000\;cd/m^2$ at a drive voltage below 11V and external quantum efficiency of the device is above 1% in the wide range of luminance from 10 to $35000\;cd/m^2$ and reaches its highest 1.6% at $500\;cd/m^2$. The chromaticity coordinate shift of the device is negligible in this wide range of luminance. The blue shift of emission color with an increase of current density was attributed to the narrowing of recombination zone width with raise of current density.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.961-963
• /
• 2002

Organic electroluminesencent device have been studied because of its easy fabrication and high brightness for plate panel display instead of cathode ray tube. There are some device structure for full color filter system can be applicable to the full color application if the blue light organic electroluminesencent device(OELD) is developed. In this study, we fabricated OELD of ITO/CuPc/PBD/LiF/Al using mixed of 500, 600, $700[{\AA}]$ by vacuum method as a emitting layer. We studied the voltage-current, voltage-luminance characteristics and blue light emission of OELD,

• 전자공학회논문지 IE
• /
• 제48권4호
• /
• pp.25-29
• /
• 2011

유기 EL소자는 제작이 쉽고 휘도가 높아 CRT와 LED 대신 평판 디스플레이 패널의 광원으로써 많이 연구되어 지고 있으며, OLED 소자중 청색 OLED는 풀컬러 적용 어플리케이션에 적용할 수 있기 때문에 이에 대한 연구가 이루어 지고 있다. 본 연구에서는, 발광 소재로 PBD, Alq3를 사용하여 유기 EL 디바이스의 전기 발광 특성을 측정하였으며, 전류와 휘도는 전압과의 관계에서 알 수 있었고 휘도와 전류의 관계를 제시하였다.

• Journal of Information Display
• /
• 제12권4호
• /
• pp.219-222
• /
• 2011

Iridium-(III)-bis[(4,6-di-fluorophenyl)-pyridinate-N,$C^2$' ]picolinate-based blue phosphorescent organic light-emitting diodes with different electron transport materials were fabricated. Each electron transport material had different electron mobilities and triplet energies. The device with 1,3,5-tri(m-pyrid-3-yl-phenyl)benzene had the highest external quantum efficiency (20.1%) and luminous current efficiency (33.1 cd/A) due to its high electron mobility and triplet energy. The operational stability of each device was also compared with that of the others. The device with 2,2',2"(1,3,5-benzenetriyl)tris-(1-phenyl-1H-benzimidazole) was found to have a longer lifetime than the other devices.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.153.3-153
• /
• 2001

Recently, the researches on the mobile computing technologies for palm computers, PDA´s and wearable computers became very active. In the development of mobile devices, one of the key technologies is the human interface. So, this paper suggests a new input device for PDA´s and wearable computers so-called key-glove. The design methods of key-glove are discussed in this paper and we manufactured the key-glove which recognizes that character is typed in though the hand´s movements analysis and is designed as an input device for wearable computers and virtual environment. Also, we are executes a performance test for alphanumeric data entry, command entry and X-Y pointer input. In the results, we are confirmed in its ...

• 무역상무연구
• /
• 제59권
• /
• pp.181-205
• /
• 2013

This study has analyzed the international trade flow of medical devices in Korea, China, and U.S. more theoretically and systematically through a mutual connection of the medical device export structure of Korea and the import structure of China and U.S. organically, with an intensity approach on the bilateral international trade flow. Also, it is meaningful to find a solution to boost exports of Korea to China and U.S.. Therefore in this study, we recognize the importance of the medical device market in China and U.S., which is the main competition for Korea and its market, and look into the trade situation of these three countries. We also look into the relative market stream and the trade intensity of the main medical devices in Korea, China and U.S., and seek measures for the steady growth of the medical device market in these three countries.