• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.1
• /
• pp.42-52
• /
• 2012

In this paper, a waveguide antenna is designed and fabricated for side and rear radar sensor of vehicles in UWB (Ultra Wide Band) high band (center frequency : 9.5 GHz, -10 dB bandwidth : 600 MHz (6.4 %)). For the radar antenna, a probe fed rectangular waveguide antenna having simple structure and wide bandwidth is used. An important performance factor in this antenna is the isolation between transmitting (TX) and receiving (RX) waveguide antennas because this radar system uses TX and RX antennas separately. Thus the isolation between two antennas was simulated for E-plane and H-plane array. As a result, it was verified that the isolation of the H-plane array of the antennas is better than E-plane array, due to the TE10 mode. Therefore, H-plane arrayed waveguide antennas were mounted on a T-shaped radar module and performance of antennas was investigated. The -10 dB bandwidth of the TX and RX antenna mounted on T-shaped radar module was measured as 1000 MHz (10.52 %) and 1090 MHz (11.47 %) respectively and the isolation is less than -50 dB in the operation band. The peak gain is 7.65 dBi for the TX antenna and 7.26 dBi for the RX antenna and the beamwidth of H-plane of TX and RX antenna was measured as $64^{\circ}$ and $65^{\circ}$ respectively. Consequently, we verified that the proposed waveguide antenna is appropriate for a vehicle radar applications.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.1
• /
• pp.28-41
• /
• 2012

The User-Oriented Public Transit Service provide public transit service through media devices, such as mobile, BIT and In-vehicle display devices, which considered user's individual characteristics and specific preference anytime and anywhere. The objective of this study is to develop and improve the services in the three media devices. This study applied user-satisfaction analysis in evaluating the service in Busan, analyze factor affecting the level of service user's satisfaction, and draw remedies based on the analysis results. The user's satisfaction average values in each media are 3.29 mobile, 3.62 BIT, and 4.05 In-vehicle display devices. Overall satisfaction average value 3.54 on the service showed a positive reaction from the survey participants. The important factor affected on general satisfaction of the User-Oriented Public Transit Service is "In-vehicle display devices" scored .632 (standardized coefficient) by categorical regression analysis. But users prefer to further improve the service environment rather than to add service information because they are already contented with the information they are getting. Furthermore, this study suggested ways of improving the User-Oriented Public Transit Service based on the satisfaction analysis results from the user's perspective.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.6
• /
• pp.136-150
• /
• 2010

Due to the effect of indoor coverage problem, the QoS of the indoor users will be degraded dramatically, with the number of indoor users. The femto cell is a popular solution for such problems. Since the price of the femto base station is usually cheap enough, one can sets up huge number of base stations in a small indoor area to reduce the size of communication cell. In this way, the QoS of the indoor users can be improved significantly. Moreover, the data rate can also be increased. However, how to decide an ideal transmitting power according to the surrounding radio environment is not a trivial problem, that still has not been addressed well. If the transmit power of femto base station is too large, the interference to the macro users will be increased. Conversely, if the transmit power of femto base station is too small; the coverage of femto base station will be reduced. To address this problem, we propose a power configuration method in femto base station using Genetic Algorithm by investigating a new fitness function. Furthermore, we adopt the weighted sum approach to improve the user performance in different modes. The simulation results show that the proposed power configuration method can not only improves the downlink SINR, but also enhance the channel capacity for both the Macro cell systems and Femto cell systems compared with some conventional methods.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.5
• /
• pp.23-35
• /
• 2011

The pedestrian green time is usually long at wide width intersections. This sometimes causes the increase of delay on the whole intersection because of long cycle length and thus small g/C ratio on some direction. In this paper, to improve these problems, staggered pedestrian crossing was evaluated on the vehicular and pedestrian aspects. The results were gained by using both TRANSYT-7F and VISSIM model. The vehicle control delay of the staggered pedestrian crossing was estimated to be decreasing than that of the general pedestrian crossing by 14.9% to 85.6%. The pedestrian average delay of two pedestrian crossing systems was examined by analytical method and VISSIM. According to the analytical method there was no significant difference between each pedestrian crossing system. The pedestrian delay of staggered pedestrian crossing was from 13.4% to 22.3% than the general pedestrian crossing by VISSIM. In conclusion, the staggered pedestrian crossing was more effective than general pedestrian crossing for both the vehicle and the pedestrian. However this conclusion was resulted from micro simulation where traffic volume condition, v/c, was from 0.8 to 1.1.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.3
• /
• pp.112-123
• /
• 2012

Different from general roads, intersections are the points where roads having different geometric structure and traffic operation system are met, and thereby they have complicated road structure and environmental factors. Various changes in driving patterns such as collision between vehicles approaching from roads adjacent to intersections, sudden stop of vehicles upon stop sign, quick start upon green lights kept increasing traffic accidents. It is known that traffic accidents are mainly derived from human factors. This study, in order to find out factors affecting drivers' behaviors within intersections, measured physiological responses such as brain wave, sight, driving speed, and so on by using state-of-the-art measuring device. As to concentration brain wave at individual intersections, it was found out that brain wave of testes was higher at main Arterial and accident-prone intersections compared with that of subsidiary Arterial. In addition, it was detected that drivers' visual activity was widely distributed at accident-prone intersections, meaning that it enhanced cautious driving from nearby vehicles. As to major factors causing drivers' workloads, factors from nearby vehicles such as deceleration, acceleration, lane change of nearby vehicles appeared as direct factors causing drivers' workloads, clarifying that these factors were closely related to causes of traffic accidents at intersections. Results of this study are expected to be used as basic data for evaluation of safety at intersections in consideration of physiological response of drivers.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.1
• /
• pp.10-21
• /
• 2008

User travel behavior is based on the existence of complete traffic information in deterministic user optimal principle by Wardrop(1952). According to deterministic user optimal principle, users choose the optimal route from origin to destination and they change their routes arbitrarily in order to minimize travel cost. In this principle, users only consider travel time as a factor to take their routes. However, user behavior is not determined by only travel time in actuality. Namely, the models that reflect only travel time as a route choice factor could give irrational travel behavior results. Therefore, the model is necessary that considers various factors including travel time, transportation networks structure and traffic information. In this research, more realistic deterministic optimal traffic assignment model is proposed in the way of route recognizance behavior. This model assumes that when users decide their routes, they consider many factors such as travel time, road condition and traffic information. In addition, route recognizance attributes is reflected in this suggested model by forward searching method and backward searching method with numerical formulas and algorithms.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.4
• /
• pp.107-115
• /
• 2011

Since 2009 The Korean National Police Agency has been pushed "permissive left-turn" forward in order to making progress in Korean traffic operations system. Preceding researches manuals and guidelines present 6 standards(# of accidents # of lanes, pedestrian volume sight # of permissive left-turn lanes vehicle volume) as installation permissive left-turn. But in practical affairs it is most important that secure enough Gap-time between permissive left-turn vehicle and opposite through lane vehicle to make permissive left-turn vehicle move safer and more efficiently. This study suggests applying gap acceptance theory in microscopic model to permissive left-turn installation standards. Analysis methods of this study are field data survey statistical analysis and microscopic simulation analysis. This study collected field data by using AVI recording and measured permissive left-turn vehicle intersection passing time(T1) and against the opposite through lane vehicle Gap-time(T2). And statistical analysis performed about two values that measured before to predict the functionality between T1 and T2. These studies to overcome the limit of sample size carried out a microscopic simulation(VISSIM) plan and collect more samples to input statistical analysis.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.3
• /
• pp.73-82
• /
• 2017

As of December 2016, the number of registered automobiles in Korea exceeds 21million. As a result, greenhouse gas emission by transportation sector are increasing every year. It was concluded that the development of the driving strategy considering the driving behavior and the road conditions, which are known to affect the fuel efficiency and the greenhouse gas emissions, could be the most effective fuel economy improvement. Therefore, this study aims to develop a fuel efficient driving strategy in a complex linear section with uphill and curved sections. The road topography was designed according to 'Rules about the Road Structure & Facilities Standards'. Various scenarios were selected. After generating the speed profile, it was applied to the Comprehensive Modal Emission Model and fuel consumption was calculated. The scenarios with the lowest fuel consumption were selected. After that, the fuel consumption of the manual driver's driving record and the selected optimal driving strategy were compared and analyzed for verification. As a result of the analysis, the developed optimal driving strategy reduces fuel consumption by 21.2% on average compared to driving by manual drivers.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.14 no.3
• /
• pp.31-37
• /
• 2015

In this paper, newly proposed dual-band microstrip antennas using stacked inverted-L-shaped parasitic elements are presented for GPS $L_1(1.575GHz)$ and $L_2(1.227GHz)$ bands. For making dual band which has large interval, ${\lambda}/4$($L_1$ band) inverted-L-shaped parasitic elements were stacked at both side of radiation apertures on the half-wavelength($L_2$ band) patch antennas. The resonance in the parasitic elements occurs through coupling to the patch. Next, due to using circular polarization at GPS, ${\lambda}/4$($L_1$ band) inverted-L-shaped parasitic elements was stacked using sequential rotation technique on the patch and both side of the diagonal corners of the antenna were eliminated to make dual-band circular polarization. The designed circular polarized antenna's dimensions are $0.43{\lambda}L{\times}0.43{\lambda}L{\times}0.06{\lambda}L$ (${\lambda}L$ is the free-space wavelength at 1.227 GHz). Measured -10 dB bandwidths was 120 MHz(7.6%) and 82.5 MHz(6.7%) at GPS $L_1$ and $L_2$ bands. and 3 dB axial ration bandwidths are 172 MHz(10.9%) and 25 MHz(2.03%), respectively. All of these cover the respective required system bandwidths. Within each of the designed bands, broadside radiation patterns were observed.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.6
• /
• pp.141-155
• /
• 2017

As the use of SNS becomes more active, many people are posting their thoughts about specific events in their SNS in the form of text. As a result, SNS is used in various fields such as finance and distribution to conduct service satisfaction surveys and consumer monitoring. However, in the transportation area, there are not enough cases to utilize unstructured data analysis such as emotional analysis. In this study, we developed an emotional analysis methodology that can be used in transportation by using highway VOC data, which is atypical data collected by Korea Expressway Corporation. The developed methodology consists of morpheme analysis, emotional dictionary construction, and emotional discrimination of the collected unstructured data. The developed methodology was verified using highway related tweet data. As a result of the analysis, it can be guessed that many information and information about the construction and the accident were related to the highway during the analysis period. Also, it seems that users complain about the delay caused by construction and accident.