• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.04a
• /
• pp.9-14
• /
• 2004

In this study, we analyzed that the geomagnetic storms in the end of October 2003 influenced a positioning of GPS permanent stations. The data that observed in total 23 permanent GPS stations are used, and did a precisely analysis every hour with GIPSY-OASIS II software to produced ITRF2000 coordinates of each stations. After that we analyzed and compared the ITRF2000 coordinates calculated every hour with public ITRF2000 results of each stations. As a result of this study, the increases of positioning errors showed well when geomagnetic storms happened and the maximum error reached about 0.80m.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.18 no.3
• /
• pp.251-261
• /
• 2000

This paper deals with the precision analysis of GPS measurement referred to ITRF96 which is the new reference frame announced in 1996, and show the data processing results of short and long baselines with different methods. In this paper, we minimized the observation error of GPS using precise ephemerides which has provided by Jet Propulsion Laboratory and represents the comparative analysis results of baseline measurements using GIPSY-OASIS II software. Here, we also discussed the accuracy of data processing methods.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.19 no.4
• /
• pp.415-423
• /
• 2001

This paper deals with the data processing method relative to reference frames through the calculation of absolute coordinates of permanent GPS site which was established at Sungkyunkwan University. In this paper. we computed the ITRF97 coordinates with high precision (0.0001 ppm) from GPS data analysis. Also, we derived the accurate coordinates referred to WGS84 and Korean Geodetic Datum (KGD) using transformation parameters provided. ITRF97 coordinates were computed by using the GIPSY-OASIS II (GOA II) software and the algorithms for determining the position developed Jet Propulsion Laboratory (JPL). The coordinates referred to WGS84 and KGD were derived from the transformation parameters provided by International Earth Rotation Service (IERS) and National Geography Institute (NGI). The parameters determined by NGI were calculated from the 2000 project of the establishment of geocentric coordinate system. We tested its availability through the comparison of the coordinates obtained from local GPS data analysis.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.2D
• /
• pp.317-324
• /
• 2006

This study deals with the precise GPS data processing refer to ITRF2000 through the calculation of absolute coordinates of cadastral satellite station which were established by purpose of cadastral surveying. We used the Gipsy-Oasis II software developed Jet Propulsion Laboratory to estimate daily position of GPS stations with orbital and atmospheric parameters. Especially, we carried out ionospheric delay, tropospheric delay, data existence whether or not and quality control check of observation data during pre-processing. The standard deviation of absolute coordinates was determined better than ${\pm}4mm$ from GPS precise analysis. The RMSE of difference between the result of this study and existing result by using Bernese s/w shows ${\Delta}X={\pm}0.079m$, ${\Delta}Y={\pm}0.019m$ and ${\Delta}Z={\pm}0.031m$.

• Korean Journal of Geomatics
• /
• v.5 no.1
• /
• pp.51-58
• /
• 2005

GPS measurements from Feb. 2002 through Mar. 2004 were used to estimate recent crustal movement across the Lai Chau - Dien Bien fault system in North-West Vietnam. Four GPS campaign data were processed and combined with appropriate constraints using automatic GAMIT/GLOBK run in order to estimate ITRF2000 coordinates, local horizontal velocity and extensive/compressive strain rates. ITRF2000 velocities are consistent with east-southeastward movement of Sundaland i.e. Indochina. Local velocities show not much left-lateral strike-slip of the fault system and derived strain rates are insignificant from zero at $95\%$ confidence.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.39 no.5
• /
• pp.313-319
• /
• 2021

The national geodetic reference frame of Korea was adopted in 2003, which is referenced to ITRF (International Terrestrial Reference Frame) 2000 at the epoch of January 1, 2002. For precise positioning based on the satellites, it should be thoroughly maintained to the newest global reference frame. Other than plate tectonic motion, there are significant events or changes such as earthquakes, antenna replacement, PSD (Post-Seismic Deformation), seasonal variation etc. We processed three years of GNSS (Global Navigation Satellite System) data(60 NGII CORS stations, 51 IGS core stations) to produce daily solutions minimally constrained to ITRF. From the time series of daily solutions, the sites with unexpected discontinuity were identified to set up an event(mostly antenna replacement). The combined solution with minimum constraints was estimated along with the velocity, the offsets, and the periodic signals. The residuals show that the surrounding environment also affects the time series to a certain degree, thus it should be improved eventually. The transformation parameters to ITRF2014 were calculated with stability and consistency, which means the national geodetic reference frame is properly aligned to the global reference frame.

• Journal of the Korean Geophysical Society
• /
• v.9 no.3
• /
• pp.151-158
• /
• 2006

Highly accurate surface velocity estimation using modern geodetic techniques plays very important role in the geological and geophysical interpretation. Researches with GPS are ongoing in many countries of the world. This study aims to estimate the amount of crustal deformation and the direction of deformation in the Korean Peninsula and in its neighbor. We used GAMIT that is a comprehensive GPS analysis package developed at MIT. Then, a Global Kalman filter called GLOBK is used to combine the results from GAMIT and to estimate the relative and absolute velocity vector for the crustal deformations. To estimate station velocity accuracy and reliably, it is extremely important to pay great attention to the reference frame. Firstly, using the Suwon (SUWN) of Eurasian plate as main frame, we estimate the relative amount of crustal deformation and a direction of Eurasian plate and North American plate, Secondly, using ITRF 2000 as main frame, we estimate the absolute crustal deformation of Eurasian plate and North American plate. The continent of Eurasian where has the Korean Peninsula deforms 33.36 mm per year to East-Southeast (ESE), and Japanese Tsukuba (TSKB) in North American plate deforms to South-Southwest (SSW). Finally, the Korean Peninsula is approaching the Japanese Island and the rate of horizontal crustal deformation between the Suwon and the Tsukuba is about 31.98 mm per year in the moving direction of N85.9oW (274.1o) for the past three years.

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.4
• /
• pp.127-133
• /
• 2014

The purpose of this study is to evaluate the accuracy of Network-RTK(VRS) survey for applying to Ground Control Points(GCPs) survey required for mapping aerial photographs. Network-RTK has been serviced by National Geographic Information Institute since 2007. On the basis of the global coordinates system(ITRF2000), the coordinates of GCPs determined by Static GNSS survey with relative positioning techniques were regarded as accurate values. The coordinates of GCPs were also determined by Network-RTK survey using two kinds of receivers, and then they were converted into the global coordinates system(ITRF2000) by applying suitable geoid model and coordinate transformation. These coordinates of GCPs were compared with those from Static GNSS survey. The root mean squares error (RMSE) of coordinate differences between Network-RTK and Static GNSS was ${\pm}2.0cm$ in plane and ${\pm}7.0cm$ in height. Therefore, Network-RTK survey that enables single GNSS receiver to measure positions in short time is a practical alternative in positioning GCPs to either RTK survey that uses more than two sets of GNSS receivers or Static GNSS survey that requires longer observation time.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2010.04a
• /
• pp.43-44
• /
• 2010

We present the analysis of space geodetic technique observation, Satellite Laser Ranging (SLR), to LAGEOS1 and LAGEOS2 for the definition of the Terrestrial Reference Frame (TRF). The data were analyzed in 7day arcs during about 9 years (2000/01/10 ~ 2008/12/29) using NASA Goddard's GEODYN/SOLVE II software. The comparison of the coordinates between ITRF2005 and TRF solutions determined in this work shows that there is no significant bias.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.35 no.6
• /
• pp.591-598
• /
• 2017

This study is for coordinates analysis(geocentric and rectangular coordinate) of Korean geodetic VLBI which has been operated by NGII (National Geographic Information Institute) in Republic of Korea since 2014. The purpose of this study is a fundamental research to determine the Korean geodetic datum. The VLBI data recorded from September 29th 2014 to July 31th 2017, total approximately a hundred of VLBI databases, is used to calculate daily positions and position rates. The VLBI coordinates are based on ITRF(2000,2005,2008,2014) with epochs of the first Korean VLBI observation date(September 29th 2014) and Korean Geodetic Datum(January 1st 2002). And as a results of VLBI observation, Korean VLBI coordinate movement velocity of 3.1cm/yr in the direction of $112.4^{\circ}$.