• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1361-1362
• /
• 2006

In this research We investigated the effect of UV/O3, $O_3$ treatments of Indium-tin oxide(ITO) surface on the performance of organic light emitting devices(OLEDs). The fundamental structure of OLEDs was ITO(anode) / TPD(Hole Transport Layer) / $Alq_3$ / Al(cathode). We performed UV/O3, $O_3$ treatments and found that both treatments enhanced the performance of OLEDs. Current-Voltage, Luminance-Voltage characteristics were measured at room temperature.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.1878-1880
• /
• 2005

In this research, We investigated the effect of $O_2/O_3$ Plasma treatment of indium-tin oxide (ITO) surface on the performance of organic light emitting devices (OLEDs). The OLED had a structure of ITO/N,N'-diphenyl-N,N' -(3-methylphenyl)-1, 1'-biphenyl-4-4'-diamine (TPD)/Tris (8-hydroxyquinolinato) Aluminum $(Alq_3)/Al$. The ITO surface was treated by $O_2/O_3$ plasma with different RF power chamber pressure and exposure time. As a result, the emission efficiency of the OLEDs could be improved obviously.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.522-523
• /
• 2005

Top emission OLED 소자에 사용되는 ITO(Indium-Tin-Oxide)의 저항을 개선하여 보다 낮은 저항을 가지는 전극을 제작하기 위해 AZO(ZnO-Ag-ZnO)를 제작하였다. AZO박막은 기존의 ITO박막이 수십 $\Omega$을 나타내던 것과 비교하여 $8\Omega$으로 매우 낮은 저항을 나타내었다. 투과율은 84%로 기존의 ITO박막과 유사한 성능을 나타내었다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.485-486
• /
• 2006

Top emission OLED 소자에 사용되는 ITO(Indium-Tin-Oxide)의 저항을 개선하여 보다 낮은 저항을 가지는 전극을 제작하기 위해 AZO(ZnO-Ag-ZnO)를 제작하였다. AZO박막은 기존의 ITO박막이 수십 $\Omega$을 나타내던 것과 비교하여 $8{\Omega}$으로 매우 낮은 저항을 나타내었다 투과율은 84%로 기존의 ITO박막과 유사한 성능을 나타내었다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2007.04a
• /
• pp.69-70
• /
• 2007

FTS(Facing Target Sputtering) 장치를 이용하여 polyethylene terephthalate (PET) 필름 위에 ITO(Indium Tin Oxide) 박막을 성장시키고 이들의 광학적, 구조적 특성을 조사하였다. 막 두께는 150 nm로 고정하였고, 인가적력과 산소 가스 유량비를 변수로 박막을 합성 하였다. 그 결과 80 % 이상의 광투과율과 Rms 26.8 nm 값을 갖는 ITO / PET 박막을 합성하였다.

• Journal of the Korean Electrochemical Society
• /
• v.14 no.4
• /
• pp.225-230
• /
• 2011

CIGS solar cells are kind of thin film solar cells, which are studied several years. CdS buffer layer that makes heterojunction between window layer and absorbing layer was one of issue in the CIGS solar cell study. New types of buffer layer consisted of indium sulfide are being studied these days owing to high price and environmental harmful of CdS. In this study, we demonstrated electrochemical synthesis of indium sulfide film as a buffer layer, which is cheaper and faster than other methods. A uniform indium sulfide film was obtained by applying two different alternating potentials. The band gap of the film was optimized by controlling temperature during the electrochemical synthesis. Using x-ray photoelectron spectroscopy and diffraction method we confirmed that ${\beta}$-indium sulfide was formed on ITO electrode surface.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.11
• /
• pp.740-744
• /
• 2017

Herein we studied the electrical and optical properties of indium tin oxide ITO/Ag/ITO multilayer thin films for application in transparent conducting electrodes. The ITO and Ag thin films were deposited onto soda lime glass (SLG) using radiofrequency and DC-sputtering methods, respectively. The as-synthesized ITO/Ag/ITO multilayer thin films were analyzed using 4-point probe, UV-Visible spectroscopy, and Hall measurement. We observed a rapid increase in electron concentration with increasing Ag thickness. However, electron mobility decreased with increasing Ag thickness. Finally, ITO/Ag/ITO multilayer thin films showed a characteristic low sheet resistance of $18{\Omega}/sq$ and high optical transmittance value (80%) with variation of Ag thickness (5~10 nm).

• Journal of IKEEE
• /
• v.20 no.4
• /
• pp.412-415
• /
• 2016

In this study, we fabricated the wearable film-heaters used in thermotherapy for senior citizens and investigated the heat generation characteristics. The wearable film-heaters embedded into eco-flex were constructed with indium tin oxide (ITO) nanoparticles coated on glass fibers. Under a stretching strain of 30%, the wearable film-heaters stably operated with temperature variation of 10%. In addition, the wearable film-heater worn on the wrist increased the temperature of the wrist from $35^{\circ}C$ to $43^{\circ}C$ within 2 min.

• Journal of the Semiconductor & Display Technology
• /
• v.21 no.1
• /
• pp.91-94
• /
• 2022

Top emission organic light-emitting diode is commonly used because of high efficiency and good color purity than bottom - emission organic light-emitting device. Unlike BEOLED, TEOLED contain semi-transparent metal cathode. Because of semi-transparent cathode, micro cavity effect occurs in TEOLED. We optimized this effect by changing the thickness of hole injection layer. Device consists of is indium-tin-oxide / N,N'-Di-[(1-naphthyl)-N,N'-diphenyl]-1,1'-biphenyl-4,4'-diamine (x nm) / tris-(8-hydroxyquinoline) aluminum (50nm) / LiF(0.5nm) / Mg:Ag (1:9), and we changed NPB thickness which is used as HTL in our device in order to study how micro cavity effects are changed by optical path. As the results, NPB thickness at 35nm showed the current efficiency of 8.55Cd/A.

• Applied Science and Convergence Technology
• /
• v.24 no.2
• /
• pp.41-46
• /
• 2015

Transparent conductive oxides (TCOs) are essential material in optoelectronics such as solar cells, touch screens and light emitting diodes. Particularly TCOs are attractive material for infrared cut off film due to their high transparency in the visible wavelength range and high infrared reflectivity. Among the TCO, Indium tin oxide has been widely used because of the high electrical conductivity and transparency in the visible wavelength region. But ITO has several limitations; expensive and low environmental stability. On the other hands, fluorine doped tin oxide (FTO) is well known for low cost, weather ability and stable in acidic and hydrogen. In this study, two different magnetron sputtering techniques with RF and DC modes at room temperature deposition of FTO thin film was conducted. The change of oxygen content is influence on the topography, transmittance and refractive index.