• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1505-1507
• /
• 1996

In this study, $(Pb_{0.88}La_{0.12})(Zr_{0.40}Ti_{0.60})O_{2.97}$ (La/Zr/Ti=12/40/60) ceramic thin films were fabricated from an alkoxide-based by Sol-Gel method. PLZT stock solutions were made and spin-coated on the ITO-glass rubstrate at 4000[rpm] for 30[sec]. Coated specimens were baked to remove the organic materials at $400[^{\circ}C]$ for 10[min]. This procedure was repeated 5 times. The coated films were finally annealed at $450{\sim}700[^{\circ}C]$ for 1[hr]. The ferroelectric perovskite phases precipitated under the sintering of $550{\sim}700[^{\circ}C]$ for 1[hr]. Relative dielectric constant of the PLZT thin were increased with increasing the sintering temperature, the thin file sintered at $650[^{\circ}C]$ showed the highest value of 196. But in the PLZT thin film sintered at $700[^{\circ}C]$, relative dielectric constant was greatly decreased due to reacts between ITO electrode and glass substrate. In all thin films, the transmittance was more than 70[%] (at 632.8[nm]).

• 한국진공학회지
• /
• 제17권1호
• /
• pp.28-33
• /
• 2008

R.F 마그네트론 스퍼터링 방법을 이용하여 Indium tin oxide(ITO)가 증착된 유리기판 위에 PLZT ($Pb_{1.1}La_{0.08}Zr_{0.65}Ti_{0.35}O_3$) 박막을 제작하였다. 기판온도를 $500^{\circ}C$로 고정하여 증착한 후 급속열처리 방법으로 다양한 온도 ($550-750^{\circ}C$)에서 후열처리 하였다. 후열처리온도의 변화에 따른 PLZT 박막의 결정학적 특성을 X선 회절법을 통하여 분석하였고 원자간력 현미경을 이용하여 박막의 표면 상태를 관찰하였다. 또한 precision material analyzer 을 이용하여 분극이력곡선과 피로특성을 측정하였다. 후 열처리 온도가 증가함에 따라 잔류분극 값(Pr)은 $10.6{\mu}C/cm^2$ 에서 $31.4{\mu}C/cm^2$로 증가하였으며 항전계(Ec)는 79.9 kV/cm에서 60.9 kV/cm로 감소하는 경향을 보였다. 또한 피로특성의 경우 1MHz 주파수에서 ${\pm}5V$의 square wave를 인가하여 측정한 결과 $700^{\circ}C$에서 후열처리한 시편의 경우 $10^9$회 이상의 분극반전을 거듭하였을 때 분극값이 15% 감소하는 결과를 나타내었다.

• 한국결정성장학회지
• /
• 제12권4호
• /
• pp.184-189
• /
• 2002

초음파 분무 MOCVD법에 의한 $(Pb_{0.91}La_{0.09})(Zr_{0.65}Ti_{0.35})O_3$(PLZT) 박막의 제조와 광학적, 전기적 특성을 조사하였다. Pb의 휘발성을 고려하여 0.2M의 precursor에 Pb를 5 wt%, 10 wt%과잉 첨가하였다. ITO-coated glass 기판 위에 산소분위기에서 30분 동안 증착한 후 in-situ 상태의 RTA (rapid thermal annealing) 방식으로 열처리를 하였다. 단일 perovskite상의 결정화 온도는 $600^{\circ}C$였다. Pb를 10 wt% 과잉 첨가한 박막의 최대 광투과율은 520nm에서 약 84%로 광학적 특성이 우수하였으며, 유전상수는 약 308의 값을 가졌고, 누설전류는 Pb를 0, 5 wt% 과잉 첨가한 PLZT 박막보다 낮은 값을 가졌다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.473.1-473.1
• /
• 2014

We report on the characteristics of Zr-doped $In_2O_3$ (IZrO) films prepared by DC-RF magnetron cosputtering of $In_2O_3$ and $ZrO_2$ targets for use as a transparent electrode for high efficient organic solar cells (OSCs). The effect of $ZrO_2$ doping power on electrical, optical, structural, and surface morphology of the IZrO film was investigated in detail. At optimized $ZrO_2$ RF power of 50 W, the IZrO film exhibited a low sheet resistance of 20.71 Ohm/square, and a high optical transmittance of 83.9 %. Furthermore, the OSC with the IZrO anode showed a good cell-performance: fill factor of 61.71 %, short circuit current (Jsc) of $8.484mA/cm^2$, open circuit voltage (Voc) of 0.593 V, and power conversion efficiency (PCE) of 3.106 %. In particular, the overall OSC characteristics of the cell with the IZrO anode were comparable to those of the OSC with the conventional Sn-doped $In_2O_3$ (FF of 65.03 %, Jsc of $8.833mA/cm^2$, Voc of 0.608 V, PCE of 3.495 %), demonstrating that the IZrO anode is a promising alternative to ITO anode in OSCs.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(2)
• /
• pp.49-52
• /
• 2001

The electrochemical characteristics of Alalloy thin film with low impurity concentrations AIZr deposited by using do magnetron co-sputtering deposition are investigated for the applications as gate bus line in the TFT-LCD panel. AlZr thin films were deposited various atomic percent of Zr. For increasing Zr atomic percent the hillock density was decreased and the resistivity was increased. The deposited thin films show the decrease of resistivity and the increase of grain size after the RTA at 300 $^{\circ}C$for 20 min.. Moreover, the resistivity of AIZr does not show appreciable grain size dependence after RTA. It is concluded that the decrease of resistivity after RTA is due to the increase of grain size. The annealed AIZr(at.0.9%) is found to be hillock free. The electrode potentials of AIZr were less than ITO's (-1.4V) and the etching rate of AIZr(at.0.9%) was 3.8587ng/sec. in KOH(10%) solution. Caculation results reveal that the AIZr(at.0.9%) thin film can be applicable to gate line of 25" UXGA class TFT-LCD panels and can not be applicable to data line.line.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.361-361
• /
• 2012

PZT (Pb(Zr,Ti)O3) thin films have been used widely in the MEMS application, due to their inherent ferroelectric and piezoelectric properties. Such ferroelectricity induces much higher dielectric constants compared to those of the nonperovskite materials. In this work, the PZT thin films were deposited onto Indium-Tin-oxide (ITO) substrates through the spin-coating of PZT sols. The deposited PZT thin films were characterized in terms of the electrical and optical properties with special emphases on conductivity and optical constants. The detailed analysis techniques incorporate the dc-based current-voltage characteristics for the electrical properties, spectroscopic ellipsometry for optical characterization, atomic force microscopy for surface morphology, X-ray Photoelectron Spectroscopy for chemical bonding, Energy-dispersive X-ray Spectrometry for chemical analyses and X-ray diffraction for crystallinity. The ferroelectric phenomena were confirmed using capacitance-voltage measurements. The integrated physical/chemical features are attempted towards energy-oriented applications applicable to next-generation high-efficiency power generation systems.

• 한국전기전자재료학회논문지
• /
• 제19권10호
• /
• pp.966-970
• /
• 2006

We reported on characteristics of the piezoelectric ceramic-polymer composite for the application of the thick-film speaker. The PVDF-PZT composites were fabricated to incorporate the advantages of both ceramic and polymer with various mixing ratios by 3-roll mill mixer. The composite solutions were coated by the conventional screen-printing method on ITO electrode coated PET (Polyethylene terephthalate) polymer film. After depositing the top-electrode of silver-paste, 4 kV/mm of DC field was applied at $120^{\circ}C$ for 30 min to poling the composite films. The value of $d_{33}$ (piezoelectric charge constant) was increased when the PZT weight percent was increased. The maximum value of the $d_{33}$ was 24 pC/N at 70 wt% PZT. But the $g{33}$ (piezoelectric voltage constant) showed the maximum value of $32mV{\cdot}m/N$ at 65 wt% of PZT powder. The SPL (sound pressure level) of the speaker fabricated with the 65:35 composite film was about 68 dB at 1 kHz.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.40-41
• /
• 2006

In this work, we developed the 0-3 type piezoelectric composite to incorporate the advantages of both ceramic and polymer. The PVDF-PZT composites were fabricated with various mixing ratio by 3-roll mi11 mixer. The composite solutions were coated on ITO bottom-electrode deposited on PET (polyethylene terephthalate) polymer film by the conventional screen-printing method. After depositing the top-electrode of silver-paste, 4kV/mm of DC field was applied at $120^{\circ}C$ for 30min to poling the 0-3 composite film. The value of $d_{33}$ was increased as the PZT weight percent was increases. But the $g_{33}$ value showed the maximum at 65 wt% of PZT powder.

• Nuclear Engineering and Technology
• /
• 제56권3호
• /
• pp.812-818
• /
• 2024

The volume and toxicity of radioactive waste can be decreased by separating the components of high-level liquid waste according to their properties. An impregnated silica-based adsorbent was prepared in this study by combining N,N,N',N',N",N"-hexa-n-octylnitrilotriacetamide (HONTA) extractant, N',N'-di-n-hexyl-thiodiglycolamide (Crea) extractant, and macroporous silica polymer composite particles (SiO₂-P). The performance of platinum-group metals adsorption and separation on prepared (HONTA + Crea)/SiO₂-P adsorbent was then assessed together with that of co-existing metal ions by batch-adsorption and chromatographic separation studies. From the batch-adsorption experiment results, (HONTA + Crea)/SiO₂-P adsorbent showed high adsorption performance of Pd(II) owing to an affinity between Pd(II) and Crea extractant based on the Hard and Soft Acids and Bases theory. Additionally, significant adsorption performance was observed toward Zr(IV) and Mo(VI). Compared with studies using the Crea extractant, the high adsorption performance of Zr(IV) and Mo(VI) is attributed to the HONTA extractant. As revealed from the chromatographic experiment results, most of Pd(II) was recovered from the feed solution using 0.2 M thiourea in 0.1 M HNO₃. Additionally, the possibility of recovery of Zr(IV), Mo(VI), and Re(VII) was observed using the (HONTA + Crea)/SiO₂-P adsorbent.

• 한국결정성장학회지
• /
• 제10권2호
• /
• pp.140-144
• /
• 2000

($Pb_{0.91}$$La_{0.09}$)($Zr_{0.65}$$Ti_{0.35}$)$O_3$ thin films were prepared on ITO-coated glass by spin-coating. As $Pb_{0.9}$$La_{0.1}$)$TiO_3$ thin films were used as seeding layers, formation temperature of perovskite was reduced and theUrosette" structure was disappeared. PLZT thin films with a seeding layer of 40 nm thick showed a (100) preferred orientation and better dielectric and ferroelectric properties.ties.