• Journal of the Microelectronics and Packaging Society
• /
• v.27 no.4
• /
• pp.47-54
• /
• 2020

Integration of active and passive waveguides is an essential component of the photonic integrated circuit and its elements. Butt joint is one of the important technologies to accomplish it with significant advantages. However, it suffers from high optical loss at the butt joint junction and need of accurate process control to align both waveguides. In this study, we used beam propagation method to simulate an integrated device composed of a laser diode and spot size converter (SSC). Two SSCs with different mode properties were combined with laser waveguide and optical coupling efficiency was simulated. The SSC with larger near field mode showed lower coupling efficiency, however its far field pattern was narrower and more symmetric. Tapered passive waveguide was utilized for enhancing the coupling efficiency and tolerance of waveguide offset at the butt joint without degrading the far field pattern. With this technique, high optical coupling efficiency of 89.6% with narrow far field divergence angle of 16°×16° was obtained.

• The Journal of the Korea Contents Association
• /
• v.20 no.11
• /
• pp.15-27
• /
• 2020

In the design process that focuses on problem solving, in general, two or three barriers to design creativity appear at the same time and are linked to increase difficulty. Because the design problem always arises in unusual, unique, weird, and difficult to define, it is not possible to extract the correct answer through the formula and the answer is always plural. This study aims to present solutions and prove their effectiveness as a follow-up study that seeks to overcome the representative obstacles to design creativity discussed in the previous study. To this end, a qualitative study was conducted to find solutions to the obstacles suggested in the previous study and to devise key solutions(creativity development cards). At the same time, a quantitative research methodology using experiments and statistical analysis was adopted. After grasping the core characteristics of an object using the creativity development card, it was able to approach the creative solution by utilizing the reductive analysis of the original such as transformation of the core characteristics, reconsideration of essential problems and intentional differentiation. As a result, it was confirmed that the proposed solutions were effective not only as a method of overcoming the barriers to design creativity, but also in improving creativity.

• Ecology and Resilient Infrastructure
• /
• v.7 no.1
• /
• pp.15-25
• /
• 2020

We've compared and conceptually evaluated the newly emerging concept of nature-based solutions (NbS's), in the aspect of water management, and existing similar solutions of different naming, all of which are based on ecosystem functions. In this study, it is found that NbS's seem significant and meaningful both educationally and understandably in the aspect that it can comprehensively cover and include the existing methodologies and solutions using the functions of natural ecosystem to socio-environmental challenges. It, however, seems not quite different from the broad-meaning of green infra, including Eco-DRR, in terms of the approaching methodologies in water management. The conceptual and spatial hierarchy of each practice in water management considered in this study can be expressed in the narrowing order of NbS-(EE)-BGI-(CRT)-GI-LID. Last, the term LID, which is the best management practice for storm water management in the development project, can be replaced with the term GI for clarification and less confusion both in academia and practice.

• Journal of the Korean Mathematical Society
• /
• v.37 no.5
• /
• pp.707-720
• /
• 2000

Conley index is used study bifurcation from equilibria of full bounded solutions to parameter dependent families of ordinary differential equations of the form {{{{ {dx} over {dt} }}}} =$\varepsilon$F(x, t, $\mu$). It is assumed that F(x, t,$\mu$) is uniformly almost periodic in t.

• Bulletin of the Korean Mathematical Society
• /
• v.40 no.2
• /
• pp.235-241
• /
• 2003

It is proved that the product of any two linearly independent meromorphic solutions of second order linear differential equations with coefficients of small lower growth must have infinite exponent of convergence of its zero-sequences, under some suitable conditions.

• Soft Computing and Machine Intelligence
• /
• v.1 no.1
• /
• pp.1-10
• /
• 2021

Analysis and Tracking of bug reports is a challenging field in software repositories mining. It is one of the fundamental ways to explores a large amount of data acquired from defect tracking systems to discover patterns and valuable knowledge about the process of bug triaging. Furthermore, bug data is publically accessible and available of the following systems, such as Bugzilla and JIRA. Moreover, with robust machine learning (ML) techniques, it is quite possible to process and analyze a massive amount of data for extracting underlying patterns, knowledge, and insights. Therefore, it is an interesting area to propose innovative and robust solutions to analyze and track bug reports originating from different open source projects, including Mozilla and Eclipse. This research study presents an ML-based classification model to analyze and track bug defects for enhancing software engineering management (SEM) processes. In this work, Artificial Neural Network (ANN) and Naive Bayesian (NB) classifiers are implemented using open-source bug datasets, such as Mozilla and Eclipse. Furthermore, different evaluation measures are employed to analyze and evaluate the experimental results. Moreover, a comparative analysis is given to compare the experimental results of ANN with NB. The experimental results indicate that the ANN achieved high accuracy compared to the NB. The proposed research study will enhance SEM processes and contribute to the body of knowledge of the data mining field.

• Wind and Structures
• /
• v.5 no.2_3_4
• /
• pp.177-192
• /
• 2002

Computation solutions for the flow around a cube, which were generated as part of the Computational Wind Engineering 2000 Conference Competition, are compared with full-scale measurements. The three solutions shown all use the RANS approach to predict mean flow fields. The major differences appear to be related to the use of the standard $k-{\varepsilon}$, the MMK $k-{\varepsilon}$ and the RNG $k-{\varepsilon}$ turbulence models. The inlet conditions chosen by the three modellers illustrate one of the dilemmas faced in computational wind engineering. While all modeller matched the inlet velocity profile to the full-scale profile, only one of the modellers chose to match the full-scale turbulence data. This approach led to a boundary layer that was not in equilibrium. The approach taken by the other modeller was to specify lower inlet turbulent kinetic energy level, which are more consistent with the turbulence models chosen and lead to a homogeneous boundary layer. For the $0^{\circ}$ case, wind normal to one face of the cube, it is shown that the RNG solution is closest to the full-scale data. This result appears to be associated with the RNG solution showing the correct flow separation and reattachment on the roof. The other solutions show either excessive separation (MMK) or no separation at all (K-E). For the $45^{\circ}$ case the three solutions are fairly similar. None of them correctly predicting the high suctions along the windward edges of the roof. In general the velocity components are more accurately predicted than the pressures. However in all cases the turbulence levels are poorly matched, with all of the solutions failing to match the high turbulence levels measured around the edges of separated flows. Although all of the computational solutions have deficiencies, the variability of results is shown to be similar to that which has been obtained with a similar comparative wind tunnel study. This suggests that the computational solutions are only slightly less reliable than the wind tunnel.

• Journal of Surface Science and Engineering
• /
• v.1 no.1
• /
• pp.5-13
• /
• 1967

Up to this date, numerous methods of analysis of electropling solutions are published. Some, however, need lots of works before reaching final results, or require high technique and special instruments, and also some are unaccurate due to unclearnes of end point. Like our undevelop countries, technicians of electroplating shops are most high school graduates or under, and have not much knowledge on chemistry. Furthermore, those technicians have to control their plating solutions by themselves without having enough analytical laboratory equipment . Therefore, in this paper the simplest, besides accurate method is investigated after comparing numerous methods published. Among the methods of copper determinations from acid and alkaline copper plating baths, EDTA titration method are chosen, due to these methods are the simpest and fastest for the evaluation of metal content, without requirng any special instrument. For acid copper solutions, chelate titrations were accurate enough. Since the end point of titration of chelate method is variable according to the kind of indicators and other metal's coexisitence as well as solution component, many difficulties were encountered from cyanide copper, on the contrary of acid copper bath. PAN , PV, and MX indicators were tried , but it is found that MX is the best. In chyanide solution ,due to cyanide is the masking reagent , elimination of this component is essential , and finally found that elimination CN-by precipitation with AgNO$_3$ solution was the simplest and the most accurate way among others. This method was very accurate for the new plating solutions even coexistence with organic brightners. However used solutions for long months running have to be predetermined the accurate copper value by thiosulfate method form time to time, before chelate titration by means of AgNO$_3$ precipitation. Always some constant deviations will be seen according to the solutions nature. Therefore those deviation values have to be compensated each time.

• School Mathematics
• /
• v.19 no.3
• /
• pp.481-494
• /
• 2017

Tasks of multiple solutions have been said to be suitable for the cultivation of mathematical creativity. However, studies on the fact that multiple solutions presented by students are useful or meaningful, and students' thoughts while finding multiple solutions are very short. In this study, we set goals to confirm the qualitative differences among the multiple solutions presented by the students and, if present, from the viewpoint of mathematical creativity. For this reason, after presenting the set of tasks of the two versions to eight mathematically gifted students of the second-grade middle school, we analyzed qualitative differences that appeared among the solutions. In the study, there was a difference among the solution presented first and the solutions presented later, and qualitatively substantial differences in terms of flexibility and creativity. In this regard, it was concluded that the need to account for such qualitative differences in designing and applying multiple solutions should be considered.

• Bulletin of the Korean Chemical Society
• /
• v.22 no.2
• /
• pp.219-227
• /
• 2001

The silver colloidal effects on the excited-state structure and intramolecular charge transfer (ICT) of p-N,N-dimethylaminobenzoic acid (DMABA) in aqueous cyclodextrin (CD) solutions have been investigated by UV-VIS absorption, steady-state and time-resolved fluorescence, and transient Raman spectroscopy. As the concentration of silver colloids increases, the ratio of the ICT emission to the normal emission (Ia /Ib) of DMABA in the aqueous $\alpha-CD$ solutions are greatly decreased while the Ia /Ib values in the aqueous B-CD solutions are significantly enhanced. It is also noteworthy that the ICT emission maxima are red-shifted by 15-40 nm upon addition of silver colloids, implying that DMABA encapsulated in $\alpha-CD$ or B-CD cavity is exposed to more polar environment. The transient resonance Raman spectra of DMABA in silver colloidal solutions demonstrate that DMABA in the excited-state is desorbed from silver colloidal surfaces as demonstrated by the disappearance of νs (CO2-)(1380 cm-1 ) with appearance of ν(C-OH)(1280 cm -1) band, respectively. Thus, in the aqueous B-CD solutions the carboxylic acid group of DMABA in the excited-state can be readily hydrogen-bonded with the secondary hydroxyl group of B-CD while in aqueous and $\alpha-CD$ solutions the carboxylic acid group of DMABA has the hydrogen-bonding interaction with water. Consequently, in the aqueous B-CD solutions the enhancement of the Ia /Ia value arises from the intermolecular hydrogen-bonding interaction between DMABA and the secondary hydroxyl group of B-CD as well as the lower polarity of the rim of the B-CD cavity compared to bulk water. This is also supported by the increase of the association constant for DMABA/ B-CD complex in the presence of silver colloids.