This paper analyzes the consumers' preference for packaged apple and derives the measures to vitalize the distribution of packaged apple. To do this, survey was conducted for consumers in large cities, Seoul, Busan, and Daegu to observe their purchasing behavior and satisfaction both for packaged and unpackaged apple. Survey was focused to how they are satisfied with several attributes of package such as size, appearance, content, material, and label. On the basis of the survey results, the values of the package attributes were estimated. Survey results show that consumers tend to buy unpackaged apple rather than packaged apple. About 34 percent out of 313 respondents have ever purchased apple packed with paper box while only 10.5 percent have an experience to buy packaged apple with transparent box. Most respondents answered they preferred the package of five to six apples and 1.3 kilograms most. They preferred mid or large size apple. Estimation of the values of the package attributes using the conjoint analysis shows that consumers are giving the highest value to the price of packing material. It means that consumers are reluctant to the extra payment resulted from packing the apple. Therefore, the efforts to reduce the cost of packing apple should be made steadily. In order to vitalize the distribution of small packaged apple, the package should contain high quality apple with high sugar content, proper size, good appearance, and so on. And it needs to be promoted to the consumers that small packaged apple are not inferior to apple packed with paper box.
Journal of the Microelectronics and Packaging Society
/
v.28
no.4
/
pp.31-39
/
2021
In this paper, warpage analysis that separates PCB for PoP (Package on Package) into unit and substrate using FEM (Finite Element Method), analysis of the effect of layer thickness on warpage, and SN (Signal-to-Noise) ratio by Taguchi method was carried. According to the analysis result, the contribution of the circuit layer on warpage was very high in the unit PCB, and the contribution of the outer layer was particularly high. On the other hand, the substrate PCB had a high influence of the circuit layer on warpage, but it was relatively low compared to the unit PCB, and the influence of the solder resist was rather increased. Therefore, considering the unit PCB and the substrate PCB at the same time, it is desirable to design the PCB for PoP layer-by-layer structure so that the outer and inner circuit layers are thick, the top solder resist is thin, and the thickness of the bottom solder resist is between 5 ㎛ and 25 ㎛.
For changes in the distribution structure these days, consumer demand is moving rapidly from offline to online. The consumers' mentality to purchase products conveniently is reflected in this phenomenon. Also for agricultural products, safety to protect contents, brand and design which can provide credibility to consumers are recognized as most important than ever. Especially, strawberry is thin-skinned so that the quality of product may deteriorate even with weak impact and shaking, so it is significantly influenced by the structural packaging or material. Also, strawberry is frequently distributed through direct trading, it is the reality that the package design of strawberry is less competitive than that of other products due to inadequate environments of commercial farms. That is, the demand of strawberry increases everyday but the strawberry package cannot fulfill the needs of producers and consumers. In order to reinforce competitiveness in strawberry sales, it is urgent to carry out fundamental studies regarding the development of package. Therefore, the purpose of this study is to supplement and improve issues arising from the usage of current strawberry package. Through the analysis of strawberry package elements (shape, material, design) and understand the points of improvement sought by producers and consumers through IPA MAP (importance, satisfaction level) analysis.
The concept of package in these day is getting changing with fluctuation of living and management circumstance. The is due to society trancefiguration and change of economic structure and induced to appear small paxkage. These package trend to covert from the class management to total management system and these system made a promotion to development current industry. In these day, with the development of industry and the progress of the life , the package is performing the first faculty such as perservation of manufacture, convenience of keeping and loading in , expedition of sale and additionally the role of package in modern economy is significant for the essen tial element of enterprise prosperity by improving its shape color and materials. It is readilly appearent to anyone in the recycling field that stable markets for collected materials are vitals to any successful program. The recycling movement has increased in popularity throughout the any country: however, it has brought with it a market for them. This attitute also prevails in the political arena where atates or municipalities who are committed to recycling major portion of the solid waste stream are asking these same question regarding the disposition of thte recycled material.
This study is an exploratory study on the package design research strategy for the activation of the energy drink market. We analyzed the case study of energy drinks and the preference of energy beverage package design which are being sold in Korea and overseas from Oct. 24 to 28, 2016. The results of this study are as follows: First, preference is given to two colors, blue and red, regarding the color of package design of energy drinks. In particular, blue was the most preferred at 62.8%, and the reason for choosing color was the image that reminds me of energy drinks, and it was highly visible. Second, most preference of energy drinks for packaging material was selected from can and glass materials, and most preferred for can. Third, preference for calligraphy was found to be due to the dynamic images of energy drink preferring rough images. Fourth, package design awareness focused on overall image rather than one factor. The limitations of the study are the research subjects only to university students in Daejeon and Chungnam area. In the future, it will be necessary to classify the overall elements of package design and various research subjects, and to study the major consumption and consumption areas of energy drinks. In this study, it is implied that the design of the package needs a package design strategy in accordance with the overall product image, rather than focusing on one factor.
Journal of the Korea Society of Computer and Information
/
v.13
no.6
/
pp.279-286
/
2008
The IT industry plays the engine role in Korean economy which reaches up to 17% of Korean GDP. However the current global economic depression which stems mainly from the US has caused insufficient demand in IT industry. The decreased demand leads to a drug in the market, to fierce price competitions and increasing fear on the world IT market depression. Considering the facts, there are strong demands for the diversification of the products of exports and the countries Korea exports to. These need differentiated strategies which can be summarized in various IT package-type overseas expansion model including the consideration in strategic items, countries, connecting large and small-medium size companies or businesses and related industries. The importance of IT industry in Korean economy will grow constantly and the IT package-type overseas expansion models will preside the movements.
The micro crack was occurred where the stress concentrated by the thermal stress which was induced during the cooling period after molding process or by the various reliability tests. In order to estimate the possibility of development from inside micro crack to outside fracture, the fracture toughness of EMC should be measured under the various applicable condition. But study was conducted very rarely for the above area. In order to provide a was to decide the fracture resistance of EMC (Epoxy Molding Compound) of plastic package which is produced by using transfer molding method, measuring fracture is studied. The specimens were made with various EMC material. The diverse combination of test conditions, such as different temperature, temperature /humidity conditions, different filler shapes, and post cure treatment, were tried to examine the effects of environmental condition on the fracture toughness. This study proposed a way which could improve the reliability of LOC(Lead On Chip) type package by comparing the measured $J_{IC}$ of EMC and the calculated J-integral value from FEM(Finite Element Method). The measured $K_{IC}$ value of EMC above glass transition temperature dropped sharply as the temperature increased. The $K_{IC}$ was observed to be higher before the post cure treatment than after the post cure treatment. The change of $J_{IC}$ was significant by time change. J-integral was calculated to have maximum value the angle of the direction of fracture at the lead tip was 0 degree in SOJ package and -30 degree in TSOP package. The results FEM simulation were well agreed with the results of measurement within 5% tolerance. The package crack was proved to be affected more by the structure than by the composing material of package. The structure and the composing material are the variables to reduce the package crack.ack.
Today's ERP system has become a core system of IT·SW that not only supports and manages enterprise resources efficiently, but also encompasses major business tasks. In other words, the ERP system is an essential strategic element for the survival of a company as a powerful means to innovate the management of an organization. This study analyzed the impact on the utilization of IT·SW from the perspective of the entire organization's process without limiting the performance evaluation of the ERP system itself, which is a core system of a company. The measurement data for evaluating the performance of the ERP system was the 2018 domestic company IT·SW utilization survey result report (subject to survey : 3,017 domestic companies with 10 or more employees). Based on this data, this study analyzed the impact of the ERP system on the entire enterprise's IT·SW utilization. In particular, attention was paid to whether there would be a difference in the use of IT·SW if the type of ERP system introduction was changed through the improvement of the business process of the company. Multiple regression analysis was performed using the statistical package SPSS 25. As a result, among the ERP system introduction types, the greatest degree of (+)influence on the company's IT·SW utilization is when the ERP package SW or ASP service is used as it is. Although the difference is insignificant, the second case was to build an ERP system through self-development or outsourcing, followed by customizing the package SW or system through self-development or outsourcing. Through the results of this study, it is expected that the organization will improve the business process and use the standard ERP package SW as it is without modification, thereby effectively enhancing the use of IT·SW of the company and leading to management performance.
This paper describes the SAR data processing S/W package it will be able to process the SAR image. This package constructs the several modules: SAR Image processing module, measuring module of surface displacement using differential interferometric SAR method, classification module using the POLSAR data, SAR Focusing module. In this paper, briefly describe the algorithm that is adopted to the functions, and module architecture.
Universal health insurance normally requires a basic benefit package, whose design intersects with almost all other aspects of the health insurance debate. Despite its central importance, basic benefit package has not received the analysis it deserves in Korea. The issue of how to decide which health services should be delivered and to whom has been a matter for consistent policy debate. Many industrialized countries observed in this study have been dealing explicitly or implicitly with the basic benefit package. The methods vary from having a specific positive list of services (Bismarkian countries) to the use of guidelines (Beveridgian countries). The purpose of this paper is to form the underlying principles and process for determining what is included or left out by getting accurate and representative responses from health-related personnel. Mail survey is used. Economic burden for treatment, seriousness of disease and urgency of treatment are ranked at the first three priorities. Services that had been suspended because of financial crisis in health insurance scheme in 2001 were selected as items which should firstly be expanded into coverage. Diagnostic test against heart disease and vaccination were also selected as items which should additionally belong to the list of covered services.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.